What's more, part of that PrepAwayETE 93-Tall-Mass-Timber-Buildings dumps now are free: https://drive.google.com/open?id=1tpub51JqMz592Bu1HJdzy2SPhuSvOATd
All kinds of exams are changing with dynamic society because the requirements are changing all the time. To keep up with the newest regulations of the 93-Tall-Mass-Timber-Buildings exam, our experts keep their eyes focusing on it. Our 93-Tall-Mass-Timber-Buildings practice materials are updating according to the precise of the real exam. Our 93-Tall-Mass-Timber-Buildings Test Prep can help you to conquer all difficulties you may encounter. In other words, we will be your best helper. We are sure that 93-Tall-Mass-Timber-Buildings will help you pass the exam and get a good grade.
| Section | Objectives |
|---|---|
| Topic 1: Construction Fire Safety | |
| Topic 2: Structural & Connection Inspection | - Connection Design and Protection - Framing and Structural Elements |
| Topic 3: Mass Timber Materials | - CLT, Glulam, NLT, SCL and Engineered Wood Products |
| Topic 4: General & Construction Types | - Construction Classification — Type IV-A, IV-B, IV-C
|
| Topic 5: Fire-Resistance & Protection | - Concealed Spaces Protection - Fire-Resistance-Rated Assemblies - Noncombustible Protection & Encapsulation |
| Topic 6: Inspection Duties & Documentation | - Inspection Reporting and Compliance Verification - Statement of Special Inspections |
>> 93-Tall-Mass-Timber-Buildings Real Dumps <<
There are different versions of our 93-Tall-Mass-Timber-Buildings learning materials: PDF version, Soft version and APP version. Whether you like to study on the computer or like to read paper materials, our 93-Tall-Mass-Timber-Buildings learning materials can meet your needs. If you are used to reading paper study materials for most of the time, you can eliminate your concerns. Our 93-Tall-Mass-Timber-Buildings Exam Quiz takes full account of customers' needs in this area. Because our versions of the 93-Tall-Mass-Timber-Buildings learning material is available for customers to study, so that your free time is fully utilized, and you can often consolidate your knowledge.
NEW QUESTION # 17
Which of the following requires periodic special inspection of mass timber elements?
Answer: D
Explanation:
Concealed connections in Type IV-C construction require periodic special inspection under 2021 IBC Table
1705.5.3, making option B correct.
The mass timber special-inspection table specifically applies to mass timber elements in Types IV-A, IV-B, and IV-C . Among the activities listed for periodic inspection are bolted connections, concealed connections, erection of mass timber construction, screw installation, verification of required predrilling, and several other connection-related installation characteristics.
Options A and C are incorrect because they specify Type IV-HT. Table 1705.5.3 is expressly scoped to Types IV-A, IV-B, and IV-C rather than Type IV-HT. Option D involves a listed Type IV-A activity, but its inspection frequency is wrong: adhesive anchors installed horizontally or upwardly inclined to resist sustained tension loads require continuous , not periodic, special inspection.
For concealed connections, inspection must occur while the relevant components remain observable. Once CLT panels, wood cover, gypsum protection, or finishes hide the connection, critical installation details may no longer be verifiable without destructive removal.
References/Topics: 2021 IBC Section 1705.5.3 and Table 1705.5.3, Required Special Inspections of Mass Timber Construction.
NEW QUESTION # 18
Proprietary nails can be used by referencing which ICC-ES Evaluation Report?
Answer: D
Explanation:
ICC-ES ESR-1539 is the applicable evaluation report, making option C correct. ESR-1539 addresses nails and staples manufactured by participating companies and evaluates their use in engineered and nonengineered structural connections.
An ICC-ES Evaluation Report provides evidence that a proprietary product or system complies with specified building-code requirements where the product does not rely solely on the generic prescriptive provisions of the IBC. For proprietary nails, the report provides the technical basis needed to establish characteristics such as dimensions, materials, recognized structural applications, allowable design values, installation limitations, and conditions of use.
The current ICC-ES document is published as ESR-1539P, reflecting subsequent administrative updates to the report, but the identifying evaluation-report number remains 1539 , matching option C and the examination question.
For special inspection, merely recognizing the ESR number is not enough. The inspector should verify that the installed proprietary fastener is actually included in the report, that its diameter and length correspond to the approved construction documents, and that installation spacing, penetration, orientation, substrate, and other report conditions are satisfied.
References/Topics: ICC-ES ESR-1539, structural nails and staples; proprietary fastener evaluation and installation requirements. ICC-ES states that the nails and staples covered by ESR-1539 are used in engineered and prescriptive structural connections.
NEW QUESTION # 19
Refer to the figure by clicking on the EXHIBIT button above.
The exterior wall section shown in the Figure provides the prescribed noncombustible protection required by which Construction Type?
Answer: B
Explanation:
The illustrated configuration represents Type IV-C construction , so option C is correct. The distinguishing feature is the combination of noncombustible protection on the exterior face with an exposed CLT surface toward the interior.
IBC Section 602.4.3.1 requires the exterior side of combustible exterior walls in Type IV-C construction to have noncombustible protection providing a minimum assigned time of 40 minutes . Table 722.7.1(2) assigns exactly 40 minutes to one layer of 5/8-inch Type X gypsum board, matching the protection illustrated in Figure 66.
The decisive distinction is Section 602.4.3.2: mass timber elements in Type IV-C are permitted to be unprotected on the interior . This is fundamentally different from Type IV-A, where essentially all interior mass timber faces must be protected, and Type IV-B, where interior protection is generally required but limited areas may remain exposed under specific area and separation restrictions.
Type IV-HT does not use the Type IV-C protected-exterior/exposed-interior regulatory scheme.
References/Topics: 2021 IBC Sections 602.4.3, 602.4.3.1 and 602.4.3.2; Table 722.7.1(2), 5/8-inch Type X gypsum board = 40 minutes.
NEW QUESTION # 20
Sealants used to resist passage of air in construction Type IV-A, shall be in accordance with which of the following standards?
Answer: C
NEW QUESTION # 21
Refer to the exhibit by clicking on the EXHIBIT button above.
In the detail shown and according to AWC Technical Report 10, what is the time assigned in minutes to 5/8 in. Type X gypsum board for connection fire protection thermal separation requirements?
Answer: C
Explanation:
For the illustrated two-layer protection system, the 5/8-inch Type X gypsum-board layer directly adjacent to the connection is assigned 20 minutes, while the second layer is assigned 40 minutes. Therefore, option C is correct.
The standard assigned protection time for one layer of 5/8-inch Type X gypsum board is 40 minutes.
However, the thermal-separation methodology applies a 0.50 reduction factor to the final or base Type X layer located directly against the protected connection. That layer therefore contributes 20 minutes. The outer layer retains its full 40-minute assigned value, producing a combined assigned protection time of 60 minutes for the two-layer configuration.
The layers are not interchangeable for calculation purposes because the reduced contribution applies specifically to the layer adjacent to the protected connection. Options A and B incorrectly assign the same value to both layers, while option D reverses the required allocation.
During inspection, the special inspector should verify layer sequencing, board thickness and type, fastening, joint staggering, edge support, protection at corners, and continuity around the connection. Missing or incorrectly sequenced layers can invalidate the calculated thermal-separation time.
References/Topics: AWC Technical Report 10; AWC 2021 Fire Design Specification Section 3.5.2.1; assigned protection time for Type X gypsum board.
NEW QUESTION # 22
......
Our company committed all versions of 93-Tall-Mass-Timber-Buildings practice materials attached with free update service. When 93-Tall-Mass-Timber-Buildings exam preparation has new updates, the customer services staff will send you the latest version. So we never stop the pace of offering the best services and 93-Tall-Mass-Timber-Buildings practice materials for you. Tens of thousands of candidates have fostered learning abilities by using our 93-Tall-Mass-Timber-Buildings Learning materials you can be one of them definitely.
93-Tall-Mass-Timber-Buildings Advanced Testing Engine: https://www.prepawayete.com/International-Code-Council/93-Tall-Mass-Timber-Buildings-practice-exam-dumps.html
P.S. Free & New 93-Tall-Mass-Timber-Buildings dumps are available on Google Drive shared by PrepAwayETE: https://drive.google.com/open?id=1tpub51JqMz592Bu1HJdzy2SPhuSvOATd