They work together and analyze the examination content to compile most probable H35-581_V2.0 real dumps in three formats. These Huawei Certification Exams questions will surely appear in the next Huawei H35-581_V2.0 exam. Memorizing these Huawei H35-581_V2.0 Valid Dumps will help you easily attempt the H35-581_V2.0 exam within the allocated time. Thousands of aspirants have passed their H35-581_V2.0 exam, and they all got help from our Huawei H35-581_V2.0 updated exam dumps.
Huawei H35-581_V2.0 Exam is designed for professionals who are involved in the design, deployment, and operation of 5G networks. This includes network engineers, system engineers, network planners, network architects, and network managers. H35-581_V2.0 Exam is also suitable for professionals who are looking to enhance their skills and knowledge in the field of 5G networks and advance their careers in this rapidly evolving field.
>> Huawei H35-581_V2.0 Exam Dumps Collection <<
Under the help of our H35-581_V2.0 exam questions, the pass rate among our customers has reached as high as 98% to 100%. We are look forward to become your learning partner in the near future. As we all know, to make something right, the most important thing is that you have to find the right tool. Our H35-581_V2.0 study quiz is the exact study tool to help you pass the H35-581_V2.0 exam by your first attempt.
The H35-581_V2.0 Exam covers several topics including understanding 5G architecture, the various 5G radio resources, radio technology and propagation, planning and optimization of the 5G network, and troubleshooting techniques to handle network issues. HCIP-5G-RNP&RNO V2.0 certification exam is designed to ensure that you are equipped with the knowledge and skills required to plan and optimize 5G radio networks effectively and efficiently.
NEW QUESTION # 49
Which of the following messages includes the reselection timer used for 5G-to-4G reselection?
Answer: B
Explanation:
System Information Block 5 (SIB5) contains the inter-Radio Access Technology (inter-RAT) cell-reselection parameters required when a UE evaluates a transition from 5G NR to LTE E-UTRA.
In NR, cell reselection is performed primarily while the UE operates in RRC_IDLE or RRC_INACTIVE.
The UE evaluates serving-cell and neighboring-cell measurements according to broadcast frequency priorities, signal-level thresholds, and applicable reselection timers.
SIB5 provides information about E-UTRA carrier frequencies and their associated reselection parameters.
A particularly important parameter is t-ReselectionEUTRA , which specifies the timer associated with inter- RAT reselection toward LTE.
The UE applies this parameter when determining whether the configured reselection conditions have remained satisfied for the required duration.
This mechanism helps prevent excessive movement between NR and LTE cells caused by short-term radio- signal fluctuations.
SIB5 can also contain E-UTRA carrier-frequency lists, reselection priorities, signal thresholds, and speed- dependent reselection scaling factors.
The other listed SIBs are not responsible for carrying the standard NR-to-E-UTRA reselection timer.
Consequently, SIB5 is the correct answer because its information elements explicitly include the E-UTRA reselection configuration.
Official Reference: 3GPP TS 38.331, Section 6.3.1, SIB5 Information Element ; TS 38.304, Cell Reselection Procedures .
NEW QUESTION # 50
Which of the following PUCCH measurement counters is used for outer-loop power control on PUCCH?
Answer: D
Explanation:
Block Error Rate (BLER) is the intended answer because outer-loop power-control algorithms use error- performance feedback to adjust the target received signal quality required for reliable control-channel reception.
PUCCH carries essential Uplink Control Information (UCI), including HARQ acknowledgments, scheduling requests, and configured channel-state reports.
Errors in these transmissions can produce unnecessary retransmissions, incorrect scheduling decisions, and reduced radio-network efficiency.
The distinction between inner-loop and outer-loop power control is important.
Inner-loop power control adjusts transmission power according to the difference between measured signal quality, commonly expressed through SINR, and a configured target.
The gNodeB can issue Transmit Power Control (TPC) commands to modify the UE's PUCCH transmit power.
Outer-loop power control adjusts the target signal-quality requirement according to observed error performance. When reception reliability deteriorates, the target SINR can be increased to improve decoding probability. Conversely, consistently satisfactory error performance can permit a reduction in the target.
RSRP measures received reference-signal power, while power spectral density expresses signal or noise power per unit bandwidth. Neither directly represents the error-performance feedback used in the intended outer-loop mechanism.
Therefore, BLER is the expected examination answer, with implementation-specific qualifications.
Official Reference: 3GPP TS 38.213, Section 7.2.1, PUCCH Transmit Power Control .
Technical warning / qualification: 3GPP specifies the PUCCH power-control signaling and calculations but does not mandate one universal BLER-based outer-loop algorithm. Huawei implementations may use BER or another error-performance measure depending on the radio technology and PUCCH configuration.
NEW QUESTION # 51
Which parameter specifies the maximum number of consecutive out-of-synchronization indications that a UE receives from the lower layer on the PCell?
Answer: B
Explanation:
N310 is the correct answer because it defines the threshold number of consecutive out-of-synchronization indications received from lower protocol layers before the UE starts the applicable radio-link failure detection timer.
In 5G NR, Radio Link Monitoring (RLM) evaluates the quality of the serving radio connection using configured reference signals and associated detection thresholds.
The physical layer continuously evaluates the radio-link condition and reports in-sync or out-of-sync indications to the RRC layer when the applicable requirements are met.
When radio conditions deteriorate sufficiently, the physical layer provides out-of-sync indications.
If the UE receives N310 consecutive out-of-sync indications , the RRC layer starts timer T310, subject to the relevant procedural conditions.
The UE then monitors whether the serving radio link recovers before T310 expires.
If the UE receives N311 consecutive in-sync indications while T310 is running, the timer can be stopped, indicating recovery from the degraded radio-link condition.
If T310 expires without the required recovery, the UE performs radio-link failure handling, which may result in RRC connection reestablishment or transition to RRC_IDLE.
N312 is associated with a separate configured radio-link monitoring mechanism.
The critical distinction is that N310 specifies the consecutive indication threshold, whereas T310 represents the monitoring duration.
Official Reference: 3GPP TS 38.331, Section 5.3.10, Radio Link Failure Related Actions , and Section 7.2, Counters .
NEW QUESTION # 52
In NSA networking, which of the following counters measure the number of abnormal SgNB releases caused by their respective causes?
Select All that Apply
Answer: B,C,D
Explanation:
Options B, C, and D are the intended answers because their counter names explicitly identify abnormal Secondary gNodeB (SgNB) release events and distinguish the associated failure causes.
In Non-Standalone (NSA) E-UTRA-NR Dual Connectivity, the SgNB provides NR secondary connectivity while the LTE eNodeB maintains the master connection.
Abnormal SgNB releases can occur because of radio-link failures, UE communication failures, transmission- network faults, or unsuccessful signaling procedures.
Option B - N.NsaDc.SgNB.AbnormRel.Radio.UeLost identifies abnormal release events associated with loss of UE communication at the radio layer.
This counter is relevant when investigating coverage deterioration, radio-link instability, or unexpected UE disappearance from the secondary connection.
Option C - N.NsaDc.SgNB.AbnormRel.NoReply identifies abnormal releases associated with missing expected responses during applicable procedures.
Option D - N.NsaDc.SgNB.AbnormRel.Trans identifies abnormal releases attributable to transmission- layer problems, such as faults affecting transport connectivity or associated signaling paths.
Option A - N.NsaDc.SgNB.Rel.Coverage identifies coverage-related SgNB releases, but its name does not classify those events as abnormal releases.
The key distinction is between general release counters and counters explicitly classified under abnormal- release causes.
Therefore, B, C, and D are the intended selections.
Official Reference: 3GPP TS 37.340, E-UTRA and NR Multi-Connectivity , Secondary Node Release procedures; TS 28.552, 5G Performance Measurements .
Technical warning / qualification: The precise N.NsaDc counter names are Huawei-specific. Their interpretations are consistent with the updated question bank, but the official Huawei performance-counter dictionary has not been supplied or independently verified. The 3GPP references establish the procedure, not these exact counter definitions.
NEW QUESTION # 53
Which scenario requires a measurement-based SCG addition but does not allow blind SCG addition?
Answer: B
Explanation:
Periodic Secondary Cell Group (SCG) addition after network access is the intended answer because the Huawei NSA procedure described in the material requires measurement-based SCG addition for subsequent periodic additions.
In E-UTRA-NR Dual Connectivity (EN-DC), the LTE eNodeB operates as the Master Node (MeNB), while the NR gNodeB operates as the Secondary Node (SgNB).
SCG addition allows the network to establish NR connectivity for a UE already connected to the LTE master network.
Huawei's implementation distinguishes measurement-based SCG addition from blind SCG addition.
In measurement-based addition, the MeNB configures the UE to measure neighboring NR cells. The UE reports eligible NR measurements, commonly through a B1 measurement-reporting procedure, enabling the network to select an appropriate NR secondary cell.
Blind addition does not require a fresh qualifying measurement report before initiating the corresponding addition attempt.
According to the supplied implementation description, blind addition is restricted to initial addition scenarios, including initial access, incoming handover, and incoming RRC connection reestablishment.
Periodic addition occurs after the initial addition opportunity and therefore requires measurement-based selection under this configuration.
Consequently, option C is the intended answer.
Official Reference: 3GPP TS 37.340, E-UTRA and NR Multi-Connectivity , topic Secondary Node Addition and Modification Procedures .
NEW QUESTION # 54
......
H35-581_V2.0 Certification Test Questions: https://www.exams-boost.com/H35-581_V2.0-valid-materials.html