Übrigens, Sie können die vollständige Version der DeutschPrüfung EDGE-Expert Prüfungsfragen aus dem Cloud-Speicher herunterladen: https://drive.google.com/open?id=1mRdxO-TpZ5xmg-1v6QlfWH5sb0_UhTRJ
Wir alle wissen, dass einige IT-Zertifikate zu bekommen ist in der heutigen konkurrenzfähigen Gesellschaft ganz notwendig ist. Das IT-Zertifikat ist der beste Beweis für Ihre Fachkenntnisse. Die EDGE EDGE-Expert Zertifizierungsprüfung ist eine wichtige Zertifizierungsprüfung. Aber es ist schwer, die Prüfung zu bestehen. Es ist doch wert, Geld für ein Ausbildungsinstitut auszugeben, um im Beruf befördert zu werden. DeutschPrüfung hat die zielgerichteten Schulungsunterlagen zur EDGE EDGE-Expert Zertifizierungsprüfung, deren Ähnlichkeit mit den echten Prüfungen 95% beträgt. Wenn Sie an der Ausbildung von DeutschPrüfung teilnehmen, können Sie dann 100% die Prüfung bestehen. Sonst geben wir Ihnen eine Rückerstattung.
| Section | Weight | Objectives |
|---|---|---|
| Certification Process & Roles | 10% | - Role of EDGE Expert
|
| Energy Efficiency | 25% | - Energy baseline calculation
|
| Water Efficiency | 20% | - Water conservation measures
|
| EDGE Fundamentals & Framework | 20% | - Core principles of EDGE
|
| EDGE Software & Application | 10% | - Using EDGE calculation tool
|
| Materials & Embodied Carbon | 15% | - Low-impact material selection
|
>> EDGE-Expert Pruefungssimulationen <<
Wenn Sie die EDGE EDGE-Expert nicht bestehen, nachdem Sie unsere Unterlagen gekauft hat, bieten wir eine volle Rückerstattung. Diese Versprechung bedeutet nicht, dass wir nicht unserer EDGE EDGE-Expert Software nicht zutrauen, sondern unsere herzliche und verantwortungsvolle Einstellung, weil wir die Kunden sorgenfrei lassen wollen. Mit professionelle EDGE EDGE-Expert Prüfungssoftware und der nach wie vor freundliche Kundendienst hoffen wir, dass Sie sich keine Sorge machen.
107. Frage
In the EDGE software, the Base Case selection of external wall materials in hotels relies on information derived from:
Antwort: A
Begründung:
The EDGE software uses a Base Case to establish a benchmark for resource consumption, tailored to local conditions. The EDGE Methodology Report explains how the Base Case is constructed: "The Base Case for external wall materials in hotels is determined using data from market surveys of typical building practices in the project's country, supplemented by national building performance codes where available. This ensures the baseline reflects local construction norms and regulatory standards" (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination). Option A matches this description by referencing typical building practices and national codes. Option B incorrectly refers to global practices and international codes, which EDGE does not use, as the software prioritizes local context. Option C, focusing on corporate specifications, is not part of the Base Case methodology, as the Base Case is standardized, not project-specific. Option D, involving local suppliers or accreditation, is irrelevant to how EDGE determines the Base Case, which relies on broader market data rather than supplier-specificinformation.
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.
108. Frage
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?
Antwort: D
Begründung:
The preliminary certification stage requires specific documentation to verify the implementation of efficiency measures like Insulation for Cold Storage Envelope. The EDGE Certification Protocol outlines the evidence requirements: "For measures involving insulation, such as Insulation for Cold Storage Envelope, the Client must provide drawings at the preliminary certification stage that specify the U-value of the installed insulation to demonstrate compliance with the measure's requirements. The U-value must be lower than the Base Case to qualify for savings" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, drawings showing the U-value specification of the cold storage envelope, directly aligns with this requirement. Option A (calculations of Coefficient of Performance) is irrelevant, as COP applies to HVAC systems, not insulation:
"COP is used for chillers, not insulation measures" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (manufacturer's data sheets for the HVAC system) is also unrelated, as the measure focuses on the envelope, not HVAC: "HVAC documentation is not required for insulation measures" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (purchase receipts showing the U-value) is more relevant at the post-construction stage: "Purchase receipts are typically required at the post-construction stage to confirm installation, while drawings suffice for design-stage verification" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Thus, drawings with U-value specifications (Option C) are required at preliminary certification.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
109. Frage
How many measures need to be selected in order to meet the EDGE Energy Standard?
Antwort: A
Begründung:
In the EDGE system, compliance with the Energy Standard is not achieved by selecting a fixed number or a fixed percentage of measures. Instead, the project must demonstrate that the selected package of energy measures, when modeled in the EDGE software, achieves the minimum required energy savings compared to the local baseline. Because projects differ by climate, building type, geometry, and system choices, the number of measures needed can vary widely. One project might reach the target with a few high-impact measures, while another may need many smaller improvements.
At the same time, the curriculum explains that some measures are marked as required. These are mandatory prerequisites within the EDGE methodology and must be implemented where applicable. A project cannot claim compliance while omitting required measures. Therefore, while you may choose any combination of optional measures to reach the energy savings threshold, you must still implement all required measures as part of meeting EDGE requirements.
Options A, B, and C incorrectly imply a universal count-based rule. The only correct statement is that the project must implement at least all required measures, and then add any additional measures necessary to achieve the minimum energy savings target.
110. Frage
In EDGE software, occupancy sensors are used for controlling:
Antwort: A
Begründung:
Occupancy sensors in the EDGE software are part of energy efficiency measures aimed at reducing unnecessary energy use by automating system operation based on occupant presence. The EDGE User Guide explicitly defines their application: "Occupancy sensors in EDGE are used for controlling lighting in internal areas, automatically turning lights off when spaces are unoccupied to reduce energy consumption. This measure, often listed as EEM23 - Occupancy Sensors for Lighting, can achieve significant savings in buildings with intermittent occupancy, such as offices or schools" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, lighting, directly matches this description, as occupancy sensors are primarily associated with lighting control in EDGE. Option B (water taps) is incorrect, as occupancy sensors are not used for water systems in EDGE: "Water taps may be controlled by sensors in some projects, but this is not a recognized measure in EDGE, which focuses on measures like low-flow fixtures for water savings" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option C (air conditioners) is also incorrect, as occupancy sensors for HVAC are not a standard measure in EDGE: "While occupancy sensors can theoretically control air conditioners, EDGE does not include this as a measure; HVACefficiency is addressed through measures like variable speed drives or efficient chillers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option D (external lighting) is not applicable, as EDGE specifies occupancy sensors for internal areas: "Occupancy sensors in EDGE are applied to internal lighting, not external lighting, which may use timers or photocells instead" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). The EDGE Methodology Report further confirms: "The energy savings from occupancy sensors in EDGE are calculated based on reduced lighting hours in internal spaces, reflecting typical usage patterns in commercial buildings" (EDGE Methodology Report Version 2.0, Section 5.4:
Lighting Calculations). Thus, occupancy sensors are used for controlling lighting (Option A).
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.4: Lighting Calculations.
111. Frage
Which of the following passive design features is considered within the EDGE calculation methodology?
Antwort: C
Begründung:
Passive design features in EDGE focus on reducing energy demand through architectural and design strategies that minimize the need for active systems. The EDGE User Guide lists passive design measures included in its methodology: "Passive design features in EDGE include external shading, natural ventilation, insulation, and high-reflectivity materials, which reduce energy demand for heating, cooling, and lighting by leveraging climate and site conditions" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option B, external shading, is explicitly mentioned as a passive design feature that reduces solar heat gain, thereby lowering cooling energy needs. Option A (lighting controls) is an active measure, not passive, as it involves electrical systems. Option C (renewable energy) is an energy generation measure, not a passive design strategy, as noted in the EDGE Methodology Report: "Renewable energy systems like solar PV are treated as energy supply measures, not passive design" (EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures). Option D (efficient cooling system) is also an active system, not passive. Thus, external shading (Option B) is the correct passive design feature within EDGE's calculation methodology.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies; EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures.
112. Frage
......
Die EDGE EDGE-Expert Prüfungsdumps von DeutschPrüfung haben hohe Hit-Rate und helfen den Kadidaten, die Prüfung einmalig zu bestehen. Das kann von vielen Kadidaten bewiesen werden. Deshalb sorgen Sie nicht um die Qualität dieser EDGE EDGE-Expert Prüfungsfragen. Die sind die Prüfungsmaterialien, an denen Sie wirklich glauben können. Wenn Sie nicht glauben, dann probieren Sie persönlich einmal. Damit können Sie an meinen Worten glauben.
EDGE-Expert Deutsch Prüfung: https://www.deutschpruefung.com/EDGE-Expert-deutsch-pruefungsfragen.html
BONUS!!! Laden Sie die vollständige Version der DeutschPrüfung EDGE-Expert Prüfungsfragen kostenlos herunter: https://drive.google.com/open?id=1mRdxO-TpZ5xmg-1v6QlfWH5sb0_UhTRJ