Fast2test為你提供了不同版本的資料以方便你的使用。PDF版的NSE7_FSN_AR-7.6考古題方便你的閱讀,為你真實地再現考試題目。軟體版本的NSE7_FSN_AR-7.6考古題作為一個測試引擎,可以幫助你隨時測試自己的準備情況。如果你想知道你是不是充分準備好了NSE7_FSN_AR-7.6考試,那麼你可以利用軟體版的考古題來測試一下自己的水準。這樣你就可以快速找出自己的弱點和不足,進而有利於你的下一步學習安排。
| Section | Objectives |
|---|---|
| Enterprise Firewall | - Troubleshooting
|
| SD-WAN | - Traffic steering
|
不要再猶豫了,如果想體驗一下NSE7_FSN_AR-7.6考古題的內容,那麼快點擊Fast2test的網站獲取吧。你可以免費下載考古題的一部分。在購買NSE7_FSN_AR-7.6考古題之前,你可以去Fast2test的網站瞭解更多的資訊,更好地瞭解這個網站。另外,關於考試失敗全額退款的政策,你也可以事先瞭解一下。Fast2test绝对是一个全面保障你的利益,设身处地为你考虑的网站。
問題 #156 
The output of a policy route table entry is shown.
Which type of policy route does the output show?
答案:C
解題說明:
To determine the type of policy route, we must interpret the specific flags and fields visible in the diagnose firewall proute list (or similar kernel table) output provided in the exhibit Identify Key Indicators:
The most critical field in the output is vwl_service=1(test123).
It also lists vwl_mbr_seq=1 5.
Decode the Terminology:
vwl: This stands for Virtual WAN Link. In FortiOS, " Virtual WAN Link " is the legacy internal name for the SD-WAN feature. Even in newer firmware versions (7.x), the kernel and CLI debugs often still refer to SD- WAN objects as vwl.
vwl_service: This specifically refers to an SD-WAN Rule (also known as an SD-WAN Service). The name (test123) is the name given to that specific SD-WAN rule by the administrator.
Evaluate the Options:
A & D (Regular Policy Route): Standard policy routes (configured under config router policy) do not carry the vwl_service tag. They are typically identified by simple gateway or interface instructions without the SD- WAN service abstraction.
B (ISDB Route): While SD-WAN rules can use the Internet Service Database (ISDB) as a destination, the structure of the route entry shown here-specifically defined by a vwl_service ID-classifies it fundamentally as an SD-WAN rule, regardless of the destination object.
C (An SD-WAN rule): The presence of vwl_service and vwl_mbr_seq (SD-WAN member sequence) definitively identifies this entry as a rule generated by the SD-WAN subsystem.
Conclusion: The output shows a route controlled by the SD-WAN engine (vwl), confirming it is an SD-WAN rule.
Reference:
FortiGate Security 7.6 Study Guide (SD-WAN): " In the kernel routing table and debugs, SD-WAN rules are often referenced as vwl (Virtual WAN Link) services. The vwl_service field indicates the specific SD-WAN rule ID and name. "
問題 #157
Refer to the exhibits.

The configuration of an SD-WAN rule and the corresponding rule status and routing table are shown.
You want to understand the expected behavior for traffic that matches the SD-WAN rule, at the time the output was collected.
Based on the exhibits, which behavior can you expect for traffic that matches the SD-WAN rule?
答案:C
解題說明:
The configured rule operates in Lowest Cost (SLA) mode and references both HUB1_HC and HUB1_HTTP.
Although the configured interface-preference sequence is members 4, 5, and 6, that order is not sufficient by itself to determine the active path after SLA evaluation.
The runtime diagnose sys sdwan service4 3 output shows member 6, HUB1-VPN3, first in the evaluated member list. It is alive and displays sla(0x3), indicating that it satisfies the SLA conditions being evaluated. In SLA mode, FortiGate first considers SLA eligibility and cost; configuration order acts as a later tiebreaker.
Fortinet documents this Lowest Cost selection behavior .
Because load balancing is not enabled, traffic is not distributed over all three members. The currently preferred usable member is therefore HUB1-VPN3, making D correct.
問題 #158
Refer to the exhibit.
The output of the command diagnose vpn tunnels liar is shown.
Which two statements accurately describe the status of the tunnel? (Choose two.)
答案:A,C
解題說明:
Based on the Fortinet FCSS - Network Security 7.6 documents and the analysis of the VPN tunnel exhibit, here is the verified answer.
Questions no: 91
Verified answer: A, C
Comprehensive and Detailed Explanation with all FCSS - Network Security 7.6 documents:
To determine the status of the VPN tunnel, we must examine the specific counters and fields in the diagnose vpn tunnel list output provided in the exhibit.
Analyze Phase 2 Status (Option A):
The output displays child_num=0.
In IKEv2 (and IKEv1 implementations in FortiOS), " Child SAs " refer to the Phase 2 (IPsec) Security Associations that carry the actual data traffic.
A value of 0 indicates that no Phase 2 tunnels are established. If Phase 2 were up, child_num would be at least
1.
Additionally, under the proxyid section, the field sa=0 confirms there is no active Security Association for that traffic selector.
Analyze Traffic Status (Option C):
The stat line shows: rxp=0 txp=0 rxb=0 txb=0.
rxp (Received Packets) and txp (Transmitted Packets) are both zero. This definitively confirms that no traffic is traversing the tunnel currently. This is expected since Phase 2 is down.
Analyze Phase 1 Status (Why B is incorrect):
The tunnel entry exists in the list with a valid tun_id, and NAT-Traversal is active (natt: mode=keepalive).
The presence of the tunnel in this command output, along with active Keepalive mechanisms, typically indicates that Phase 1 (IKE SA) is established and the peers are communicating on port 4500 (NAT-T), even though the data tunnels (Phase 2) failed to negotiate. If Phase 1 were down, the tunnel would often not appear in this " list " view or would show different status flags indicating a complete connection failure.
Conclusion: The exhibit shows a scenario where the Phase 1 control channel is likely up (evidenced by the entry existence and NATT keepalives), but the Phase 2 data channel is down (child_num=0), resulting in zero traffic flow (rxp=0/txp=0).
問題 #159
Refer to the exhibit.
The output from a collector agent log is shown. The collector agent is showing the status of a workstation as Not Verified . What are two common causes for this message? (Choose two.)
答案:A,B
解題說明:
The correct answers are B and C .
The study guide has a section titled "Not Verified Status on the Collector Agent" and states:
"The collector agent cannot verify if the user is still logged in" and lists these common causes :
* "A firewall is blocking traffic to port 139 and 445"
* "The workstation remote registry service is not running"
The guide also explains the verification method:
"For WMI polling mode, the collector agent checks the WMI service. For all the other modes, the collector agent checks the HKEY_USERS hive through remote registry services." If the workstation does not respond to these checks, the status can become not verified An additional requirements slide in the same study guide confirms:
* "TCP ports 139 and 445 must be open between the collector agent and all workstations"
* "Remote registry service must be up and running on each workstation"
Why the other options are wrong:
* A is wrong because the study guide mentions a workstation coming out of hibernate mode under a different problem: "No Internet After IP Address Change" , not as a common cause of Not Verified status
* D is wrong because DNS resolution issues are also discussed under the IP address change scenario, where the collector agent uses DNS to resolve the workstation name after an IP change. That is separate from the Not Verified causes listed for this log message So the verified answers are: B, C .
問題 #160
Refer to the exhibit, which shows a session entry.
Which statement about this session is true?
答案:C
解題說明:
The session output reveals a session with proto=1 (ICMP) and the origin and reply directions show address and NAT translations. Specifically, the hook=post dir=org act=snat shows that source NAT is performed for outgoing packets, where the source 10.1.10.10:40602 is translated to 10.200.5.1:8 (likely ICMP id 8, not a TCP/UDP port). The reply direction, hook=pre dir=reply act=dnat, indicates destination NAT for incoming packets: packets incoming for 10.200.5.1:60430 are destination-NATed to 10.1.10.10:40602. The gateway (gwy) is listed as 10.200.1.254/10.1.0.1, which for outgoing traffic means that return traffic is directed to the gateway (10.200.1.254), per the NAT policy. This is confirmed by the FortiOS Session Table Guide, which explains that the returned ICMP reply will be routed out to this NAT gateway. The session statistics and logical flow (SNAT out, matching DNAT in) reinforce that reply traffic to the initiator traverses via
10.200.1.254.
References:
FortiOS Administration Guide: Session Table, NAT, and Route Interaction Fortinet Technical Note: Diagnose sys session list, Direction and NAT Analysis
問題 #161
......
如果你還在為 Fortinet的NSE7_FSN_AR-7.6考試認證而感到煩惱,那麼你就選擇Fast2test培訓資料網站吧, Fast2test Fortinet的NSE7_FSN_AR-7.6考試培訓資料無庸置疑是最好的培訓資料,選擇它是你最好的選擇,它可以保證你百分百通過考試獲得認證。來吧,你將是未來最棒的IT專家。
NSE7_FSN_AR-7.6新版題庫上線: https://tw.fast2test.com/NSE7_FSN_AR-7.6-premium-file.html