P.S. Free 2026 Juniper JN0-481 dumps are available on Google Drive shared by DumpsReview: https://drive.google.com/open?id=1cdG76GByukrbeOXDUT_yw98ctm-5f-sq
Our company pays high attentions to the innovation of our JN0-481 study dump. We constantly increase the investment on the innovation and build an incentive system for the members of the research expert team. Our experts group specializes in the research and innovation of our JN0-481 exam practice guide and supplements the latest innovation and research results into the JN0-481 Quiz prep timely. Our experts group collects the latest academic and scientific research results and traces the newest industry progress in the update of the JN0-481 study materials.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Our JN0-481 exam questions are specified as one of the most successful training materials in the line. And our JN0-481 study guide can renew your knowledge with high utility with favorable prices. Form time to time, we will give some attractive discounts on our JN0-481 learning quiz as well. So, our JN0-481 actual exam is reliably rewarding with high utility value.
NEW QUESTION # 51
IBA probes analyze telemetry data from specified devices within a blueprint. Which component Identities devices that supply data tor a specific probe?
Answer: B
Explanation:
A graph query is a component that identifies devices that supply data for a specific probe. A graph query is an expression that matches nodes in the Apstra graph database based on their attributes, such as device name, role, type, or tag. A graph query can be used to select the source devices for the input processors of a probe, as well as to filter the data by device attributes in the subsequent processors of a probe.
NEW QUESTION # 52
What is the purpose of a Juniper Apstra rack?
Answer: C
Explanation:
A Juniper Apstra rack is a physical entity that contains one or more network devices, such as leaf nodes, access switches, or generic systems. A rack is used to organize and manage the network devices in the Apstra software application. A rack has the following characteristics:
It stores information on how leaf nodes connect to generic devices. This is because a rack can include generic systems, which are devices that are not managed by Juniper Apstra, but are connected to the network. A generic system can be a server, a firewall, a load balancer, or any other device that has a network interface. A rack stores the information on how the leaf nodes, which are the devices that provide access to the end hosts, connect to the generic devices, such as the port number, the link speed, the LAG mode, and the roles1.
It has a rack type, which defines the type and number of leaf devices, access switches, and/or generic systems that are used in the rack. A rack type is a resource that is created in the data center design phase, and it does not specify the vendor or the model of the devices. A rack type can be predefined or custom-made, and it can be used to create multiple racks with the same structure and configuration2.
It has a rack build, which assigns the specific vendor and model of the devices to the rack. A rack build is created in the staged phase, and it uses the rack type as a template. A rack build can also assign the resources, such as the IP addresses, the ASNs, and the VNIs, to the devices in the rack3.
It has a rack deployment, which applies the network configuration and services to the devices in the rack. A rack deployment is performed in the active phase, and it uses the rack build as a reference. A rack deployment can also monitor the network performance and compliance of the devices in the rack4.
The following three statements are incorrect in this scenario:
It stores information on how pods connect to super spines. This is not true, because a rack does not store any information on the pod or the super spine level of the network. A pod is a cluster of leaf and spine devices that form a 3-stage Clos topology, and a super spine is a device that connects multiple pods in a 5-stage Clos topology. A rack only stores information on the leaf and the access level of the network1.
It stores IP address and ASN pool information. This is not true, because a rack does not store any information on the IP address and ASN pools. IP address and ASN pools are resources that are created in the data center design phase, and they contain a range of IP addresses and ASNs that can be assigned to the devices and the virtual networks. A rack only uses the IP address and ASN pools to assign the resources to the devices in the rack build2.
It stores device port data rates and vendor information. This is not true, because a rack does not store any information on the device port data rates and vendor information. The device port data rates and vendor information are specified in the rack build, which assigns the specific vendor and model of the devices to the rack. A rack only uses the rack build to apply the network configuration and services to the devices in the rack deployment3.
Reference:
Racks (Staged)
Rack Types (Datacenter Design)
Rack Builds (Staged)
Racks (Active)
NEW QUESTION # 53
Exhibit.
Referring to the exhibit, how many broadcast domains will an Ethernet frame pass through when traversing the IP fabric from Server A to Server B?
Answer: B
Explanation:
Referring to the exhibit, the image shows a simplified diagram of an IP fabric network connecting two servers, labeled as Server A and Server B. The IP fabric is a network architecture that uses a Clos topology to provide high bandwidth, low latency, and scalability for data center networks. The IP fabric consists of spine and leaf devices that use BGP as the routing protocol and VXLAN as the overlay technology1.
A broadcast domain is a logical portion of a network where any device can directly transmit broadcast frames to other devices at the data link layer (OSI Layer 2). A broadcast frame is a frame that has a destination MAC address of all ones (FF:FF:FF:FF:FF:FF), which means that it is intended for all devices in the same broadcast domain. A broadcast domain is usually bounded by a router, which does not forward broadcast frames to other networks2.
In the exhibit, there are two broadcast domains that an Ethernet frame will pass through when traversing the IP fabric from Server A to Server B. The first broadcast domain is the one that contains Server A and the leaf device that it is connected to. The second broadcast domain is the one that contains Server B and the leaf device that it is connected to. The IP fabric itself is not a broadcast domain, because it uses IP routing and VXLAN encapsulation to transport the Ethernet frames over the Layer 3 network. Therefore, the statement C is correct in this scenario.
The following three statements are incorrect in this scenario:
A . 1. This is not true, because there are not one, but two broadcast domains that an Ethernet frame will pass through when traversing the IP fabric from Server A to Server B. The IP fabric itself is not a broadcast domain, because it uses IP routing and VXLAN encapsulation to transport the Ethernet frames over the Layer 3 network.
B . 4. This is not true, because there are not four, but two broadcast domains that an Ethernet frame will pass through when traversing the IP fabric from Server A to Server B. The spine devices and the leaf devices that are not connected to the servers are not part of the broadcast domains, because they use IP routing and VXLAN encapsulation to transport the Ethernet frames over the Layer 3 network.
D . 3. This is not true, because there are not three, but two broadcast domains that an Ethernet frame will pass through when traversing the IP fabric from Server A to Server B. The IP fabric itself is not a broadcast domain, because it uses IP routing and VXLAN encapsulation to transport the Ethernet frames over the Layer 3 network.
Reference:
IP Fabric Overview
Broadcast Domain - NetworkLessons.com
NEW QUESTION # 54
You have a configuration deviation in the Juniper Apstra dashboard. What does this anomaly indicate in this scenario?
Answer: A
Explanation:
A configuration deviation (also called a configuration anomaly) in Apstra indicates that the device's running configuration differs from Apstra's intended (golden) configuration for that node. In day-to-day operations, this most commonly occurs when an operator makes a change outside of Apstra's control, such as entering commands directly on the device CLI (for example, on a Junos v24.4 switch), using another automation system, or applying an out-of-band configuration method.
Apstra continuously compares the device's operational configuration against what it expects based on blueprint intent. When it detects drift, it raises a deviation anomaly so operators can decide how to restore compliance. Typical remediations are either (1) remove/revert the out-of-band change so the device matches intent again, or (2) explicitly acknowledge the change in Apstra (for example, via an accept/suppress workflow, depending on the exact UI action and version), so the deviation is no longer treated as unexpected.
While it is also possible for a deviation to be triggered by a device not accepting a rendered command (capability mismatch), the question asks what the anomaly indicates in this scenario; the primary meaning of "configuration deviation" is configuration changed outside of Apstra and therefore the network is no longer aligned with the intended state. That corresponds to option C.
NEW QUESTION # 55
Which two statements are correct about a Juniper Apstra server? (Choose two.)
Answer: A,D
Explanation:
Juniper Apstra server processes are stateful, meaning they maintain context to support intent- based operations and ensure consistency across the system.
The Apstra server provides REST API endpoints that the UI consumes, enabling programmatic access to all functions available in the UI.
NEW QUESTION # 56
......
Our JN0-481 learning materials are known for instant download. You can get the download link and password within ten minutes after purchasing, therefore you can start your learning as quickly as possible. Besides, JN0-481 exam dumps contain most of knowledge points of the exam, and it will be enough for you to pass the exam, and in the process of practicing JN0-481 Exam Dumps, your professional ability will also be improved. We offer you free update for 365 days after purchasing. The latest version for JN0-481 training materials will be sent to your email automatically.
New JN0-481 Test Vce: https://www.dumpsreview.com/JN0-481-exam-dumps-review.html
P.S. Free 2026 Juniper JN0-481 dumps are available on Google Drive shared by DumpsReview: https://drive.google.com/open?id=1cdG76GByukrbeOXDUT_yw98ctm-5f-sq