P.S. Free 2026 Cisco 300-710 dumps are available on Google Drive shared by PrepPDF: https://drive.google.com/open?id=1nRC8KUe2zOdNdwiIhWdMDyDidCu3t-tI
New developments in the tech sector always bring new job opportunities. These new jobs have to be filled with the Securing Networks with Cisco Firepower (300-710) certification holders. So to fill the space, you need to pass the Cisco 300-710 exam. Earning the Securing Networks with Cisco Firepower (300-710) certification helps you clear the obstacles you face while working in the Cisco field. To get prepared for the Securing Networks with Cisco Firepower (300-710) certification exam, applicants face a lot of trouble if the study material is not updated.
| Section | Weight | Objectives |
|---|---|---|
| Management and Troubleshooting | 30% | - Troubleshoot with packet capture procedures - Analyze risk and standard reports - Troubleshoot NGFW and NGIPS (Traffic issues, Hardware issues, Configuration issues) - Troubleshoot connectivity issues (Device management, Network discovery, VPNs) - Configure dashboards and reporting in Firepower Management Center |
| Configuration | 30% | - Configure policies and rules (Access Control, Identity, SSL, Prefilter, AVC) - Configure objects (Network, Port, URL, Geolocation, Identity) - Configure system settings in Firepower Management Center - Configure these features: Network Discovery, Correlation, DNS, Intelligent Security, URL Filtering, Geolocation, File/Malware policies - Configure Snort rules (Manual, Local, Shared) |
| Deployment | 15% | - Implement NGIPS modes (Inline, Passive) - Describe IRB configurations - Implement NGFW modes (Routed, Transparent, Inline, Passive) - Implement high availability options (Link redundancy, HA on ASA with Firepower module, Firepower Management Center HA) |
| Integration | 25% | - Configure Cisco Threat Response for Firepower integration - Configure Firepower Management Center for Cisco ISE integration (pxGrid) - Describe Firepower Management Center backup procedures - Describe REST API and JSON for Firepower Management Center - Configure AMP for Endpoints and Firepower integration - Configure Cisco ISE for Firepower integration |
>> Valid 300-710 Test Online <<
If you choose our 300-710 study materials and use our products well, we can promise that you can pass the 300-710 exam and get the 300-710 certification. Then you will find you have so many chances to advance in stages to a great level of social influence and success. Our 300-710 Guide Torrent can also provide all candidates with our free demo, in order to exclude your concerts that you can check our 300-710 exam questions. We believe that you will be fond of our 300-710 learning guide.
NEW QUESTION # 63
Drag and Drop Question
Refer to the exhibit. An engineer must create a QoS policy in Cisco Firepower Management Center to limit HTTP and HTTPS traffic from users in the HR department. The upload and download limit of the HTTP and HTTPS traffic must be set to 5 Mb/s. Drag and drop the values from the left onto the corresponding settings on the right.
Answer:
Explanation:
NEW QUESTION # 64
Which two elements are required to configure Remote Access VPN on Cisco Secure Firewall Threat Defense using FMC? (Choose two.)
Answer: B,D
Explanation:
Configuring Remote Access VPN on FTD via FMC requires defining a Connection Profile (which specifies authentication method and address assignment) and a Group Policy (which defines settings such as split tunneling, DNS, and session timers) applied to connecting users.
NEW QUESTION # 65
An engineer must import three port objects into the Cisco Secure Firewall Management Center by using a CSV file. Which file content must be imported to meet the requirement?
Answer: B
NEW QUESTION # 66
Refer to the exhibit.
An engineer must create a QoS policy in Cisco Secure Firewall Management Center to limit HTTP and HTTPS traffic originating from users in the HR department. The download and upload limits for HTTP and HTTPS traffic must both be set to 5 Mb/s. Drag and drop the values onto the corresponding QoS rule settings.
Answer:
Explanation:
Explanation:
Name # HTTP-HTTPS-QoS
Apply QoS On # Interfaces in Destination Interface Objects
Download/Upload Limit # 5 Mb/s
Source Interface Networks # 192.168.1.0/24
Destination Interface Networks # 192.168.2.0/24
Destination Ports # HTTP-HTTPS
The HR workstation resides on the inside 192.168.1.0/24 network, making that subnet the source-interface network. Internet-bound traffic exits through the 192.168.2.0/24 network, which must be configured as the destination-interface network. Because rate limiting must occur as traffic leaves toward the internet, QoS is applied to interfaces in the destination interface objects. The HTTP-HTTPS object identifies the destination ports for web traffic, while HTTP-HTTPS-QoS provides a descriptive rule name. Both download and upload limits are configured as 5 Mb/s. Cisco Secure Firewall applies a QoS limit independently on each selected interface and determines upload and download direction based on the connection initiator. The Apply QoS On selection must correspond to a populated source or destination interface condition. Cisco Secure Firewall QoS configuration
NEW QUESTION # 67
Which Cisco Secure Firewall Threat Defense interface mode must be deployed when implementing an IPS that uses a SPAN port for traffic monitoring?
Answer: A
Explanation:
A passive interface is specifically designed to monitor copied network traffic received from a switch SPAN or mirror port. Because the Secure Firewall Threat Defense device is not physically placed in the traffic path, it receives a copy of the packets for inspection but does not retransmit them. This provides network and intrusion visibility without affecting production traffic. The trade-off is that a passive deployment cannot directly block, shape, or modify the monitored traffic because the original packets continue through the switch independently. An inline deployment, by comparison, places paired interfaces directly in the forwarding path and can drop malicious traffic. Routed and transparent describe firewall forwarding modes and are not the appropriate SPAN-based IPS interface type. Therefore, a SPAN-port monitoring deployment requires a passive interface. Cisco passive-interface documentation
NEW QUESTION # 68
......
If you are willing to purchase valid Cisco 300-710 reliable vce exam simulator, you should be eagle-eyed since there are so much information on the internet. Valid products are hard to tell, once you find them, you will fell as if you'd found a priceless treasure. Our 300-710 reliable vce exam simulator will be your priceless products. Our passing rate is 100% recent two years. We can assure you that No Pass Full Refund. Our materials are valid and the best absolutely.
300-710 Reliable Dumps Ebook: https://www.preppdf.com/Cisco/300-710-prepaway-exam-dumps.html
BONUS!!! Download part of PrepPDF 300-710 dumps for free: https://drive.google.com/open?id=1nRC8KUe2zOdNdwiIhWdMDyDidCu3t-tI