DumpTOP 의 Versa Networks인증 VNX301덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.
| Section | Weight | Objectives |
|---|---|---|
| SD-WAN Services and Policies | 15% | - QoS and bandwidth management - SLA monitoring and link optimization - Application steering and traffic policies |
| Configuration and Provisioning | 15% | - Zero-touch provisioning - Service deployment and onboarding - Template-based configuration |
| Security Services | 10% | - Segmentation and threat protection - VPN and encryption - Integrated firewall and IPS |
| Network Topologies and Routing | 15% | - Hub-and-spoke, full-mesh, hybrid topologies - High availability and redundancy - Routing protocols and path selection |
| Underlay and Overlay Technologies | 20% | - Underlay network design and requirements - Overlay architecture and concepts - Overlay connectivity and tunneling |
| Versa SD-WAN Infrastructure | 20% | - Edge device management and deployment - Versa Director components and functions - Versa Controller and Analytics |
| Operations and Troubleshooting | 5% | - Monitoring and logging - Diagnostics and problem resolution |
Versa Networks인증 VNX301시험을 패스하여 자격증을 취득하는게 꿈이라구요? DumpTOP에서 고객님의Versa Networks인증 VNX301시험패스꿈을 이루어지게 지켜드립니다. DumpTOP의 Versa Networks인증 VNX301덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.
질문 # 29
Examine the exhibit below.
You are configuring an IPsec tunnel towards a non-SD-WAN site over the INETTransport-VR. The site IP address is 10.1.1.1. This tunnel is for traffic between the 192.168.100.0/24 and the 192.168.200.0/24 LAN networks. The tunnel does not establish.
Referring to the exhibit, which statement is correct?
정답：D
설명：
The correct answer is A . The exhibit shows that the IPsec VPN is being configured with Tunnel Routing Instance: XIAN-Control-VR . However, the question states that the tunnel is toward a non-SD-WAN site over the INET-Transport-VR . For a site-to-site IPsec tunnel, the tunnel routing instance must match the routing instance used to reach the peer public IP address. In this case, the remote non-SD-WAN peer is
10.1.1.1 , and the intended underlay transport is INET-Transport-VR , not the Control VR.
Versa troubleshooting documentation explains that routing instances are used to define where traffic is sourced and forwarded. For example, configuration examples select routing instances when enabling services or initiating tests, and traffic must use the correct WAN or transport routing instance to reach the remote endpoint. Versa branch troubleshooting also emphasizes that after transport connectivity is available, the branch establishes IKE-based IPsec connectivity; if that connectivity fails, the IPsec-related interface remains down.
Changing the routing instance to global would not be correct because the intended path is specifically INET-Transport-VR. A higher precedence value is not required to establish the tunnel. The policy selector shown already defines local-to-remote interesting traffic, and the key failure is the incorrect tunnel routing instance.
질문 # 30
Which three notification methods does Versa Director allow you to configure for sending system event notifications? (Choose three.)
정답：B,C,D
설명：
The correct answers are A, B, and E . Versa Director supports multiple notification and event-publishing mechanisms. For email-style system and alarm notifications, Versa Director supports SMTP configuration.
The Director documentation lists Configure SMTP Notifications and explains that email templates require SMTP notifications to send test emails or operational messages.
Versa Director also supports webhook notifications. The Director GUI overview states that Notification Configuration includes webhook-based notifications for alarms, and the Director documentation includes a dedicated workflow for configuring webhook notifications for alarms.
Kafka is also a supported event-notification method. Versa's Kafka Notifications documentation states that Versa Director can publish event notifications to an Apache Kafka server when events occur on a Director node or a VOS device. It also lists notification topics for device events, Director events, Director task notifications, and object-change event notifications.
MMS is not a Versa Director system event notification method. SMS can be configured for text messaging in some notification contexts, but for the three methods listed for system event notifications in this answer set, the verified options are SMTP, Webhook, and Kafka.
질문 # 31
You are configuring the BGP routing protocol between a Versa Secure SD-WAN CPE with AS number
64514 and two upstream service providers: SP1 with AS number 64515 and SP2 with AS number 64519. You want to prefer BGP routes learned from AS 64515 over routes learned from AS 64519. Which BGP path attribute would be used to accomplish this task?
정답：B
설명：
The correct answer is LOCAL_PREF . In BGP, the Local Preference attribute is used inside an autonomous system to influence which exit path is preferred for outbound traffic. In this scenario, the Versa Secure SD- WAN CPE receives routes from two upstream service providers, SP1 and SP2. To prefer routes learned from AS 64515 over routes learned from AS 64519, you would apply a BGP import or route policy that assigns a higher local preference to routes received from SP1. Versa SD-WAN design guidance shows this exact routing concept: an import policy can manipulate the Local-Pref attribute to prefer one advertised route path over another. The Versa output examples also display "Local Preference" as a BGP route attribute used in route selection.
MULTI_EXIT_DISC, or MED, is generally used to influence how a neighboring AS enters your AS, not how your CPE prefers routes learned from different upstreams. ORIGIN is part of BGP best-path selection but is not normally the administrative tool used to prefer one provider. NEXT_HOP identifies the next-hop address and does not directly define route preference.
질문 # 32
Examine the CLI output in the exhibit.
You are reviewing the OSPF adjacency on a VOS CPE, and the output is shown in the exhibit. In this scenario, what is the probable cause of the OSPF adjacency issue?
정답：A
설명：
The correct answer is B . The exhibit shows the OSPF neighbor in the exst state, which means Exchange Start . Versa documentation lists the OSPF neighbor state codes and identifies exst as "exchange start," followed by exchange, loading, and full. In normal OSPF adjacency formation, neighbors progress through initialization and two-way communication before they negotiate database exchange. If the neighbor becomes stuck in ExStart or Exchange, a common and highly probable cause is an MTU mismatch between the two OSPF peers. During database description packet negotiation, the peers must agree on parameters that allow LSDB exchange; an MTU mismatch can prevent the adjacency from advancing to Full.
Option A is less likely because an area mismatch usually prevents the neighbor relationship from forming correctly rather than leaving it stuck in ExStart. Option C is also incorrect because the neighbor has already progressed beyond early states, which indicates that bidirectional communication has occurred. Option D is not the best answer because dropping OSPF multicast 224.0.0.5 would typically prevent discovery or keep the adjacency in an earlier state, not specifically in ExStart.
Therefore, the probable cause is an interface MTU mismatch.
질문 # 33
A tenant uses CGNAT for internet breakout. You want to verify whether CGNAT rules, pools, static NAT entries, subscribers, and endpoint-independent mapping entries are programmed in the vsmd daemon for a tenant. Which command should you use after connecting to vsmd?
정답：B
설명：
The correct answer is A . Versa CGNAT troubleshooting documentation provides commands to inspect CGNAT state inside the vsmd daemon. To view summary information about configured tenants, the document instructs administrators to issue show cgnat tenants . The sample output shows each tenant ID and counters such as the number of configured rules, pools, DS-Lite service chains, 6RD service chains, static NAT entries, subscribers, endpoint-independent mapping entries, endpoint-independent filtering entries, and softwires.
This command is especially useful when CGNAT configuration appears correct in Director but translation is not happening, because it confirms whether the runtime dataplane process actually has the tenant CGNAT state.
show interfaces brief shows interface status and IP addressing. show alarms shows event notifications, and show system uptime shows how long the system has been running. These are useful operational commands but do not show CGNAT tenant programming inside vsmd.
질문 # 34
......
안심하시고DumpTOP 를 선택하게 하기 위하여, DumpTOP에서는 이미Versa Networks VNX301인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. DumpTOP는 여러분들한테 최고의Versa Networks VNX301문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은Versa Networks VNX301인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.
VNX301시험유효덤프: https://www.dumptop.com/Versa-Networks/VNX301-dump.html