Authoritative H35-581_V2.0 Top Questions & Passing H35-581_V2.0 Exam is No More a Challenging Task

Our H35-581_V2.0 test questions can help you have a good preparation for exam effectively. Also you don't need to worry about if our H35-581_V2.0 study materials are out of validity. We provide one year free updates for every buyer, after purchasing you can download our latest version of H35-581_V2.0 Training Questions always within one year. And if you have any question on our H35-581_V2.0 learning guide, you can contact with our service at any time, we will help you pass the H35-581_V2.0 exam with our high quality of H35-581_V2.0 exam questions and good service.

Huawei H35-581_V2.0 Exam Overview:

Certification Vendor:Huawei
Exam Name:HCIP-5G Radio Network Planning & Radio Network Optimization V2.0 Exam
Exam Number:H35-581_V2.0
Available Languages:Chinese, English
Exam Format:Single-choice questions, Multiple-choice questions
Related Certifications:HCIP-5G
HCIA-5G
Certificate Validity Period:3 years
Recommended Training:Huawei Talent Development Center - 5G Training Path
Exam Registration:Huawei Talent Certification Portal
Sample Questions:Huawei H35-581_V2.0 Sample Questions
Exam Way:Computer-based exam via Huawei certification system or authorized test centers (online proctored or onsite depending on region).
Pre Condition:It is recommended to have HCIA-5G certification or equivalent knowledge of LTE/5G radio networks.
Official Syllabus URL:https://e.huawei.com/en/talent/

>> H35-581_V2.0 Top Questions <<

Test H35-581_V2.0 Pass4sure - H35-581_V2.0 Lead2pass Review

So no matter what kinds of HCIP-5G-RNP&RNO V2.0 test torrent you may ask, our after sale service staffs will help you to solve your problems in the most professional way. Since our customers aiming to H35-581_V2.0 Study Tool is from different countries in the world, and there is definitely time difference among us, we will provide considerate online after-sale service twenty four hours a day, seven days a week, please just feel free to contact with us anywhere at any time.

Huawei H35-581_V2.0 (HCIP-5G-RNP&RNO V2.0) Exam covers a wide range of topics, including 5G Radio Network Planning and Optimization, 5G Network Architecture, 5G Network Performance Management, and 5G Network Security. H35-581_V2.0 Exam is designed to test the candidate's ability to understand the technical aspects of 5G radio networks, as well as their ability to design and optimize these networks to meet the needs of customers.

Huawei HCIP-5G-RNP&RNO V2.0 Sample Questions (Q58-Q63):

NEW QUESTION # 58
Which of the following PUCCH measurement counters is used for outer-loop power control on PUCCH?

Answer: D

Explanation:
Block Error Rate (BLER) is the intended answer because outer-loop power-control algorithms use error- performance feedback to adjust the target received signal quality required for reliable control-channel reception.
PUCCH carries essential Uplink Control Information (UCI), including HARQ acknowledgments, scheduling requests, and configured channel-state reports.
Errors in these transmissions can produce unnecessary retransmissions, incorrect scheduling decisions, and reduced radio-network efficiency.
The distinction between inner-loop and outer-loop power control is important.
Inner-loop power control adjusts transmission power according to the difference between measured signal quality, commonly expressed through SINR, and a configured target.
The gNodeB can issue Transmit Power Control (TPC) commands to modify the UE's PUCCH transmit power.
Outer-loop power control adjusts the target signal-quality requirement according to observed error performance. When reception reliability deteriorates, the target SINR can be increased to improve decoding probability. Conversely, consistently satisfactory error performance can permit a reduction in the target.
RSRP measures received reference-signal power, while power spectral density expresses signal or noise power per unit bandwidth. Neither directly represents the error-performance feedback used in the intended outer-loop mechanism.
Therefore, BLER is the expected examination answer, with implementation-specific qualifications.
Official Reference: 3GPP TS 38.213, Section 7.2.1, PUCCH Transmit Power Control .
Technical warning / qualification: 3GPP specifies the PUCCH power-control signaling and calculations but does not mandate one universal BLER-based outer-loop algorithm. Huawei implementations may use BER or another error-performance measure depending on the radio technology and PUCCH configuration.


NEW QUESTION # 59
How many narrow beams are transmitted when the 4:1 slot configuration and 30-kHz subcarrier spacing are used, the SSB pattern is case C, and the maximum number of SSBs is 8?

Answer: C

Explanation:
The expected answer is eight narrow beams because the described configuration permits up to eight Synchronization Signal/PBCH Blocks (SSBs) within an applicable SSB burst set.
In 5G NR, beam sweeping enables the gNodeB to transmit synchronization information in different spatial directions, allowing UEs to identify suitable beams during cell search and initial access.
An SSB contains the Primary Synchronization Signal (PSS), Secondary Synchronization Signal (SSS), Physical Broadcast Channel (PBCH), and associated demodulation reference signals.
SSB pattern Case C uses 30 kHz subcarrier spacing and specifies candidate SSB transmission locations within the applicable half-frame.
For a configuration supporting a maximum of eight SSBs, the network can associate eight transmitted SSBs with eight distinct beam directions.
The specified 4:1 TDD slot configuration influences the available downlink transmission occasions, while the SSB pattern defines the candidate synchronization-block positions.
When all eight candidate SSB positions are configured for transmission, the gNodeB can sweep eight narrow beams during the SSB burst set.
However, the maximum supported SSB count and the number actually transmitted are not necessarily identical. The network can configure a smaller active subset.
Therefore, eight is the intended answer under the assumption that all eight SSB positions are enabled.
Official Reference: 3GPP TS 38.213, Section 4.1, Cell Search and SS/PBCH Block Candidate Positions ; TS
38.211, Section 7.4.3, SS/PBCH Block Structure .
Technical warning / qualification: The question specifies a maximum of eight SSBs but does not explicitly state that all eight are transmitted. The correct choice is A under the intended full-beam configuration.


NEW QUESTION # 60
Which of the following parameters determines the PRACH time-domain position?

Answer: C

Explanation:
The PRACH configuration index determines the time-domain opportunities available for Physical Random Access Channel (PRACH) preamble transmission.
PRACH is used during initial network access, applicable mobility procedures, and other operations requiring uplink synchronization or random-access signaling.
In NR, random-access occasions must be configured so that the UE knows when and where it is permitted to transmit a PRACH preamble.
The prach-ConfigurationIndex parameter identifies an entry in the standardized random-access configuration tables.
These tables specify characteristics including the PRACH preamble format, applicable system-frame periodicity, subframe or slot location, starting symbol, and number of time-domain PRACH occasions.
The remaining parameters control different aspects of random access.
Option A - Logic root sequence: The logical root sequence index determines the Zadoff-Chu root sequence used for PRACH preamble generation.
Option B - Frequency offset: The frequency-domain configuration determines the placement of PRACH resources within the available uplink bandwidth.
Option C - Ncs: The cyclic-shift parameter determines the cyclic-shift spacing used to generate different preamble sequences from a common root sequence.
These parameters affect PRACH sequence generation or frequency-domain placement, rather than identifying its scheduling opportunities in time.
Therefore, option D is correct.
Official Reference: 3GPP TS 38.211, Section 6.3.3.2, PRACH Mapping to Physical Resources , Tables
6.3.3.2-2 through 6.3.3.2-4.


NEW QUESTION # 61
For both the VoNR and EPS fallback solutions, the 5GC must interwork with the IMS.

Answer: B

Explanation:
The statement is true because both Voice over New Radio (VoNR) and Evolved Packet System (EPS) fallback provide voice services through the IP Multimedia Subsystem (IMS), although the radio-access and core-network procedures used to deliver the voice session differ.
In a VoNR deployment, the UE maintains its connection to the 5G Core (5GC) through NR. IMS signaling and media traffic are transported over an appropriate PDU session, with the 5GC supporting QoS-flow establishment, policy enforcement, and connectivity to the IMS network.
The Session Management Function (SMF) manages the corresponding PDU session, while the User Plane Function (UPF) provides user-plane connectivity toward the IMS data network.
EPS fallback applies when the 5G system cannot provide the required IMS voice service directly over its existing radio access.
In this case, the 5GC and NG-RAN coordinate a handover or redirection toward LTE connected to the EPC.
IMS voice establishment or continuation then takes place over the EPS.
Importantly, EPS fallback does not mean that the voice-media path remains anchored in the 5GC after fallback. It means that the 5G system participates in IMS voice-service support and coordinates access to EPS when necessary.
Official Reference: 3GPP TS 23.501, Sections 5.16.3.1-5.16.3.10, IMS Support and IMS Voice Service via EPS Fallback .


NEW QUESTION # 62
Which of the following statements regarding PDSCH allocation is incorrect?

Answer: A

Explanation:
Option A is incorrect because conventional NR PDSCH resource-allocation type 1 assigns a contiguous set of Resource Blocks (RBs), rather than supporting both contiguous and discontinuous frequency-domain allocation.
In 5G NR, the gNodeB allocates PDSCH frequency-domain resources through Downlink Control Information (DCI), using the applicable resource-allocation type configured for the active Bandwidth Part (BWP).
Resource-allocation type 0 uses a bitmap to indicate the Resource Block Groups (RBGs) allocated to a UE.
Each RBG consists of one or more consecutive RBs, with its nominal size determined by the BWP size and configured RBG-size parameter.
Because the bitmap can identify separate RBGs, type 0 can represent contiguous or noncontiguous groups of allocated resources.
Resource-allocation type 1 uses a Resource Indication Value (RIV) to identify the starting RB and the number of consecutively allocated RBs.
This provides RB-level allocation granularity but does not permit arbitrary discontinuous allocation within the conventional type 1 representation.
Therefore, option B correctly identifies type 1 as RB-level allocation, while options C and D correctly describe the characteristics of type 0.
Only option A incorrectly attributes discontinuous allocation capability to conventional type 1.
Official Reference: 3GPP TS 38.214, Sections 5.1.2.2.1 and 5.1.2.2.2, Downlink Resource Allocation Types
0 and 1 .


NEW QUESTION # 63
......

Test H35-581_V2.0 Pass4sure: https://www.lead1pass.com/Huawei/H35-581_V2.0-practice-exam-dumps.html