BONUS!!! Download part of PracticeMaterial SD-WAN-Engineer dumps for free: https://drive.google.com/open?id=16ApKmogklGZ8U2NBnBiZoCYes6u8iNF7
If you free download the demos of the SD-WAN-Engineer exam questions, I believe you have a deeper understanding of our products, and we must also trust our SD-WAN-Engineer learning quiz. Our products can provide you with the high efficiency and high quality you need. Selecting our study materials is your rightful assistant with internationally recognized SD-WAN-Engineer Certification. What are you waiting for? Quickly use our SD-WAN-Engineer study materials.
| Certification Vendor: | Palo Alto Networks |
|---|---|
| Exam Name: | Palo Alto Networks Certified SD-WAN Engineer |
| Exam Number: | SD-WAN-Engineer |
| Related Certifications: | Network Security Professional Security Service Edge (SSE) Engineer |
| Certificate Validity Period: | 2 years |
| Exam Duration: | 90 minutes |
| Available Languages: | English |
| Exam Format: | Scenario-based, Multiple choice |
| Sample Questions: | Palo Alto Networks SD-WAN-Engineer Sample Questions |
| Exam Way: | Online (Proctored) or Pearson VUE Test Center |
| Pre Condition: | Recommended: Network Security Professional certification or equivalent experience. |
| Official Syllabus URL: | https://www.paloaltonetworks.com/services/education/sd-wan-engineer |
>> SD-WAN-Engineer Valid Exam Online <<
Once you accept the guidance of our SD-WAN-Engineer training engine, you will soon master all knowledge about the real exam. Because there are all the keypoints of the subject in our SD-WAN-Engineer training guide. All in all, you will save a lot of preparation troubles of the SD-WAN-Engineer Exam with the help of our study materials. We will go on struggling and developing new versions of the SD-WAN-Engineer study materials. Please pay close attention to our products!
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 40
A multinational company is deploying Prisma SD-WAN across North America, Europe, and Asi a. The data centers in the North America region have served all regions, but regional policies are now being enforced that mandate each of the regions to build their own data centers and branch sites to only connect to their respective regional data centers.
How can this regionalization be achieved so that new or existing branch sites only build tunnels to the regional DC IONs?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
To achieve strict regional isolation where branch sites only form VPN tunnels with Data Centers in their specific region (e.g., EU branches to EU DCs only), the correct architectural feature to utilize is VPN Clusters.
In Prisma SD-WAN (CloudGenix), a Cluster defines a logical security and topology boundary for the overlay network. By default, devices may be placed in a "Default" cluster where they attempt to form a mesh or hub-and-spoke topology with all other reachable devices in that context.
To enforce the new policy:
Logical Partitioning: The administrator should create separate VPN Clusters for each region (e.g., "Cluster-NA", "Cluster-EU", "Cluster-Asia").
Assignment: The Regional Data Center IONs and their corresponding Branch IONs must be moved into their respective clusters.
Result: The Prisma SD-WAN controller dictates that devices can only establish Secure Fabric (VPN) tunnels with other devices within the same cluster. This effectively segments the global network, ensuring that an Asian branch never attempts to build a tunnel to a North American DC, satisfying the compliance requirement without complex access lists or manual tunnel configuration.
Option B (Manual Tunnels) is administratively unscalable and negates the benefits of SD-WAN automation.
Option C (Circuit Labels) is primarily for path selection and traffic steering, not for hard topology segmentation.
Option D (VRFs) is used for local Layer 3 segmentation (routing isolation) within a device, not for controlling WAN overlay tunnel formation scope.
NEW QUESTION # 41
An administrator has configured a Path Policy for "ERP_Traffic". The policy allows two public internet links, "ISP-A" and "ISP-B", both marked as "Active". The Path Quality Profile (SLA) requires a latency of less than 150ms. Currently, both ISP-A and ISP-B have a latency of 40ms, well within the SLA.
How does the Prisma SD-WAN ION determine which link to use for a new flow of "ERP_Traffic" when both active paths meet the SLA requirements?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN utilizes a sophisticated decision engine for Application-Based Path Selection that goes beyond simple failover. When configuring a Path Policy, the administrator defines "Active" paths and a "Path Quality Profile" (SLA).
SLA Compliance (The Filter): First, the system filters the available paths based on the Path Quality Profile. In this scenario, both ISP-A and ISP-B have 40ms latency against a 150ms threshold. Both are "green" or compliant paths.
Selection Criteria (The Tie-Breaker): When multiple paths are configured as "Active" and all meet the performance SLA, the ION device aims to optimize the overall user experience and network utilization. The default behavior for load balancing across healthy, compliant active paths is to select the path with the highest available bandwidth capacity.
By steering new flows to the link with the most "headroom" (available Mbps), the system prevents the saturation of a smaller link (e.g., a 20Mbps DSL line) while a larger link (e.g., 1Gbps Fiber) sits underutilized. This maximizes the aggregate throughput for the site. While latency is the qualifier, bandwidth availability is often the selector for compliant paths. Note that if the application was defined as "Real-Time" and configured for packet duplication, behavior would differ, but for standard traffic, capacity-based distribution is the standard active/active logic.
NEW QUESTION # 42
A network operator receives a critical SITE_CONNECTIVITY_DOWN alarm for a branch site in the Prisma SD-WAN portal.
What specific condition triggers this alarm type?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
The SITE_CONNECTIVITY_DOWN alarm is a high-severity alert indicating a total loss of overlay connectivity for a site.
It does not trigger if just one circuit fails (Option B), provided that other circuits are still up and maintaining VPNs. A single link failure would typically trigger a "Link Down" or "VPN Down" alarm, but the Site connectivity would remain "Up" (degraded).
It does not simply mean the device rebooted (Option A), although a reboot would cause it temporarily; the alarm specifically tracks the state of the VPN fabric.
The SITE_CONNECTIVITY_DOWN alarm specifically generates when all Secure Fabric Links (VPN tunnels) on the device are in the "Down" state. This means the branch is completely isolated from the rest of the SD-WAN network (Data Centers and other branches), even if the device itself might still be powered on and reachable via the controller (management plane). It signifies a "Blackout" of the data plane for that location.
NEW QUESTION # 43
Which configuration requirement must be met to allow two branch ION devices to automatically establish a direct Dynamic VPN (branch-to-branch) connection for traffic flow, bypassing the Data Center?
Answer: B
Explanation:
Comprehensive and Detailed Explanation
Dynamic VPNs (also known as ION-to-ION or Branch-to-Branch VPNs) allow Prisma SD-WAN devices to establish direct, on-demand secure tunnels between branch sites to optimize latency for peer-to-peer traffic (e.g., VoIP calls between offices).
To enable this capability, the primary architectural requirement is the configuration of VPN Clusters.
A VPN Cluster defines a logical group of devices that are authorized to communicate with one another.
By default, or if devices are in different clusters without peering, the topology typically defaults to Hub-and-Spoke, where branches only talk to the Data Center.
When two branch ION devices are placed into the same VPN Cluster (or peered clusters), the controller shares the necessary reachability and cryptographic information between them.
Once in the same cluster, the ION devices monitor traffic. If a user at Branch A tries to contact a server at Branch B, the ION devices detect this interest. If a direct path is available (e.g., via public internet), they will dynamically negotiate a direct VPN tunnel, bypassing the Data Center hub. This offloads the hub and reduces latency. Option B is incorrect because SD-WAN eliminates manual GRE config. Option C is incorrect because dynamic VPNs are a performance feature, not just a disaster recovery feature.
NEW QUESTION # 44
There are periodic complaints about the poor performance of a real-time application.
What can be inferred about the performance issue, based on the Network Transfer Time (NTT) and Server Response Time (SRT) image below?
Answer: D
Explanation:
In Prisma SD-WAN, application performance is monitored through distinct metrics that separate network health from application health. The provided graph displays Network Transfer Time (NTT) in blue and Server Response Time (SRT) in orange. NTT measures the round-trip time of packets traversing the WAN fabric, while SRT measures the time elapsed from when the server receives a request to when it sends the first response packet.
Analysis of the telemetry data shows that the NTT (blue line) remains consistently low and stable, generally staying below 100 milliseconds throughout the capture period. This indicates that the SD-WAN path and underlying network circuits are not the source of the latency. Conversely, the SRT (orange line) exhibits significant and erratic spikes, reaching as high as 450 to 475 milliseconds. These spikes occur while the network latency (NTT) remains flat.
Because the latency increases are isolated to the SRT metric, the root cause is confirmed to be on the Application Server side. This pattern typically suggests that the server is struggling with resource exhaustion, high CPU utilization, or database query delays during peak processing times. For a real-time application, these SRT spikes translate directly to jitter and "lag" for the end-user. By distinguishing between these two metrics, Prisma SD-WAN allows network administrators to prove that the network is performing within SLA and shift the troubleshooting focus to the application or server management teams, significantly reducing mean time to innocence (MTTI).
NEW QUESTION # 45
......
SD-WAN-Engineer Reliable Exam Bootcamp: https://www.practicematerial.com/SD-WAN-Engineer-exam-materials.html
BONUS!!! Download part of PracticeMaterial SD-WAN-Engineer dumps for free: https://drive.google.com/open?id=16ApKmogklGZ8U2NBnBiZoCYes6u8iNF7