Our H19-404_V1.0 study braindumps can be very good to meet user demand in this respect, allow the user to read and write in a good environment continuously consolidate what they learned. Our H19-404_V1.0 prep guide has high quality. So there is all effective and central practice for you to prepare for your test. With our professional ability, we can accord to the necessary testing points to edit H19-404_V1.0 Exam Questions. So high quality H19-404_V1.0 materials can help you to pass your exam effectively, make you feel easy, to achieve your goal.
| Section | Objectives |
|---|---|
| Topic 1: Network Security Design | - Access control strategies - Campus security architecture considerations |
| Topic 2: Presales Solution Design | - Customer requirement analysis - Solution proposal and design methodology |
| Topic 3: Campus Network Fundamentals | - Typical campus network deployment models - Enterprise campus network architecture principles |
| Topic 4: Huawei Campus Network Solutions | - CloudCampus solution architecture - iMaster NCE-Campus management platform |
| Topic 5: WLAN Planning and Design | - Capacity and performance design considerations - Wireless coverage planning |
| Topic 6: Switching and Routing in Campus Networks | - VLAN and segmentation design - Layer 2 and Layer 3 design principles |
>> H19-404_V1.0 Test Guide Online <<
As the old saying goes people change with the times. People must constantly update their stocks of knowledge and improve their practical ability. Passing the test H19-404_V1.0 certification can help you achieve that and buying our H19-404_V1.0 test practice materials can help you pass the H19-404_V1.0 test smoothly. Our H19-404_V1.0 study question is superior to other same kinds of study materials in many aspects. Our H19-404_V1.0 test bank covers the entire syllabus of the test and all the possible questions which may appear in the test. You will pass the H19-404_V1.0 exam for sure.
NEW QUESTION # 39
Which of the following statements are true about predefined security zones on a firewall?
Answer: A,C,D
Explanation:
Huawei firewalls provide four commonly predefined security zones: Local, Trust, DMZ, and Untrust. The Local zone represents the firewall itself, including traffic generated by or destined for the device, and has the highest default security priority of 100. The Trust zone normally represents an organization's protected internal network and has a default priority of 85, not 95. Therefore, option C is false.
The DMZ typically hosts public-facing or semi-trusted resources, such as web, email, and application servers.
Its default priority is 50, placing it between the trusted internal network and the external untrusted network.
The Untrust zone normally represents the Internet or another uncontrolled network and has the lowest predefined priority of 5.
Zone priority expresses the relative security level used to classify inbound and outbound traffic direction; it does not independently permit traffic. Security policies still determine whether matched traffic is allowed or denied. Huawei's SD-WAN design uses Trust and Untrust zones on CPEs, and iMaster NCE can orchestrate the corresponding zones and firewall policies for Internet-access protection.
NEW QUESTION # 40
iMaster NCE-Campus can implement refined policy control over user permissions. Which of the following can be used as policy conditions?
Answer: A,B,C,D
Explanation:
All four options can be used as conditions by the iMaster NCE-Campus intelligent policy engine. Huawei describes this capability through a 5W1H-based policy model. "Who" represents the user identity, user group, or role. "Where" represents the access location, including the site, region, device group, device, SSID, or IP address. "How" represents the access mode, such as wired or wireless access and the authentication method used. "What" represents the terminal type or device attributes, including PCs and mobile operating systems.
The platform can combine these conditions rather than evaluating them independently. For example, a finance employee using a corporate laptop through wired 802.1X access at headquarters can receive different permissions from the same employee connecting through a personal mobile device at a branch. The authorization result can include a VLAN, ACL, security group, bandwidth limit, DSCP value, application policy, or URL-filtering rule.
This multidimensional evaluation enables context-aware, fine-grained access control. Therefore, A, B, C, and D are all correct.
NEW QUESTION # 41
Which of the following parameters is not mandatory for GRE configuration?
Answer: B
Explanation:
Enabling the GRE checksum is optional. A functional point-to-point GRE tunnel requires a tunnel interface, GRE as the tunnel protocol, and reachable source and destination tunnel endpoints. The source identifies the local interface or IP address used to construct the delivery header, while the destination identifies the remote GRE endpoint. Without these endpoint parameters, the device cannot correctly encapsulate and deliver packets to the peer.
The checksum field is controlled by the Checksum Present bit in the GRE header. When checksum processing is enabled, the sender includes a checksum covering the GRE header and payload, and the receiver verifies it.
This can provide additional corruption detection, but it increases processing and is not required for basic GRE operation. RFC 2784 explicitly labels the checksum field as optional and states that it is present only when the Checksum Present bit is set.
Huawei SD-WAN uses GRE or GRE over IPsec to establish data channels between edge devices. The essential tunnel and transport-network information is distributed through the control system, while optional GRE functions such as checksum validation may be enabled according to operational requirements.
NEW QUESTION # 42
Which of the following technologies is used for wireless attack detection?
Answer: D
Explanation:
WIPS is the correct technology because it provides wireless intrusion prevention capabilities, including detecting and containing rogue access points, rogue stations, ad hoc devices, spoofing attempts, flood attacks, and other malicious activity on the radio interface. Huawei's security-design material groups WIDS and WIPS with wireless attack detection and rogue-device containment. It recommends attack detection in public areas and primary or secondary education environments with high security requirements.
WIDS primarily detects and reports suspicious behavior, while WIPS adds active prevention or containment actions according to the configured policy. The other options serve different purposes. Mesh is a wireless networking architecture used to provide backhaul connectivity or extend coverage between APs; it is not an attack-detection mechanism. Spectrum analysis identifies non-Wi-Fi interference sources and evaluates radio- frequency utilization, but does not provide complete security attack detection and containment. Protected Management Frames protects selected 802.11 management frames against forgery, deauthentication, and disassociation attacks, but it is a protection mechanism rather than the comprehensive detection system requested. Therefore, WIPS is the correct answer.
NEW QUESTION # 43
In the energy-saving solution based on AI traffic prediction, IoT APs are recommended to operate in non- energy-saving mode by default.
Answer: B
Explanation:
The statement is true. AI-based energy-saving systems analyze historical traffic and usage patterns to predict periods of low network demand. Ordinary AP radios or access devices can then enter an energy-saving state when their capacity is not required, while surrounding devices maintain sufficient coverage and service availability.
IoT APs, however, may host continuously operating IoT cards, sensors, electronic shelf-label services, Bluetooth location functions, RFID services, healthcare devices, or asset-tracking terminals. Placing such an AP into an energy-saving or hibernation state could interrupt more than ordinary Wi-Fi connectivity. It could also disable an IoT module's power supply, management channel, data backhaul, or persistent sensing function. Huawei's Wi-Fi and IoT convergence architecture uses APs as shared locations, power sources, and communication channels for IoT services.
Huawei also applies intelligent technologies to analyze AP load trends and perform predictive network optimization. The safer default is therefore to exclude IoT APs from automatic energy-saving actions unless the administrator confirms that their attached IoT services tolerate interruption. Accordingly, the answer is True.
NEW QUESTION # 44
......
If you purchase Huawei H19-404_V1.0 exam questions and review it as required, you will be bound to successfully pass the exam. And if you still don't believe what we are saying, you can log on our platform right now and get a trial version of HCSE-Presales-Campus Network Planning and Design V1.0 H19-404_V1.0 study engine for free to experience the magic of it.
Practice H19-404_V1.0 Exams Free: https://www.freepdfdump.top/H19-404_V1.0-valid-torrent.html