New 350-501 Test Price & Pdf 350-501 Format

P.S. Free & New 350-501 dumps are available on Google Drive shared by Fast2test: https://drive.google.com/open?id=1FJW0I0YQ8pA3qCOf6jq4-dyY9GUVjRjm

If you want to pass the Implementing and Operating Cisco Service Provider Network Core Technologies exam as shortly as possible, we will provide you the 350-501 exam dumps to help you to pass it. You only need to practice the Implementing and Operating Cisco Service Provider Network Core Technologies exam dumps for adot 20 to 70 hours, you can pass it successfully. Our Implementing and Operating Cisco Service Provider Network Core Technologies exam braindumps will save your time as well as improve your efficiency. Since the skilled professionals will guide you through you practice 350-501 the exam dumps.

Cisco 350-501 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Automation and Assurance	20%	- Describe the programmable, software-defined network - Describe automation and assurance tools - Implement network assurance with Cisco DNA Center - Describe telemetry - Configure and verify YANG models - Configure and verify NETCONF/RESTCONF - Describe Cisco NSO
Topic 2: Core Architecture	15%	- Describe management plane security - Describe service provider architectures - Describe service provider virtualization - Configure and verify control plane security - Describe Cisco network software architecture - Describe QoS architecture - Implement data plane security
Topic 3: Services	20%	- Configure L3VPN - Describe VPN technologies - Configure L2VPN and Carrier Ethernet - Implement multicast services - Implement QoS services - Describe broadband subscriber services
Topic 4: MPLS and Segment Routing	20%	- Implement MPLS Layer 3 VPNs - Implement MPLS Layer 2 VPNs - Implement segment routing traffic engineering (SR-TE) - Implement segment routing - Describe EVPN - Describe MPLS OAM
Topic 5: Networking	25%	- Describe BGP path selection algorithm - Implement IS-IS - Troubleshoot routing protocols - Implement MPLS - Implement segment routing - Implement routing policy language and route maps - Implement OSPF - Implement BGP - Describe IPv6 transition

>> New 350-501 Test Price <<

Pdf 350-501 Format | 350-501 Discount

The Cisco 350-501 certification exam has grown in popularity in today's modern Cisco era. Success in the 350-501 exam gives aspirants the chance to upskill and remain competitive in the challanging job market. Those who successfully crack the Implementing and Operating Cisco Service Provider Network Core Technologies (350-501) test prove to their employers that they are skilled enough to get well-paying jobs and promotions. Fast2test is aware that preparing with invalid Cisco 350-501 Exam Questions wastes money and time.

Cisco Implementing and Operating Cisco Service Provider Network Core Technologies Sample Questions (Q25-Q30):

NEW QUESTION # 25
An engineer working for telecommunication company with an employee id: 3715 15 021 needs to secure the LAN network using a prefix list Which best practice should the engineer follow when he implements a prefix list?

A. An engineer must use non sequential sequence effect of this configuration is that he can insert additional entries later.
B. The final entry in a prefix list must be /32
C. An engineer must include only the prefixes for which he needs to log activity.
D. An engineer must identity the prefix list with a number only

Answer: A

NEW QUESTION # 26

Refer to the exhibit. A network engineer just upgraded the Cisco IOS XE Software to the newest version on OSPF routers R1 and R2, added the point-to-point network type under Gi0/0 on R2, and configured ip route
192.168.10.0 255.255.255.0 192.168.1.2 on R1. After the engineer restarted the routers, R1 entered the Exstart state with its neighbor, but the adjacency has not been established. Which action must the engineer take to resolve the issue?

A. Set the network type of the R2 OSPF interface to broadcast.
B. Add a static route toward 192.168.20.0 on R2.
C. Change the R2 OSPF router ID to 10.1.1.1.
D. Decrease the OSPF cost of the network on R2 to 10.

Answer: A

NEW QUESTION # 27

Refer to the exhibit. A large enterprise has multiple branch offices that span several geographic regions. The enterprise runs MPLS within the core to propagate VPNv4 routes using BGP. After a recent series of DDoS attacks disrupted the network, a network engineer has been asked to reconfigure BGP to help mitigate future attacks. Which configuration must the engineer apply?

Answer: D

Explanation:
To mitigate DDoS attacks in a BGP environment, an engineer can apply BGP FlowSpec, which allows for the creation of traffic filtering policies that can be distributed across the network. This configuration enables the network to respond quickly to DDoS attacks by filtering or redirecting malicious traffic based on predefined criteria, such as source IP, destination IP, and port numbers456.
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

NEW QUESTION # 28
Refer to the exhibit.

The customer that owns the CE-1, CE-2, and CE-3 routers purchased point-to-point E-Line services from the Carrier Ethernet provider. The service provider is delivering multiplexed UNI at the customer HQ location on PE-1 and untagged UNIs at the PE-2 and PE-3 locations. Additionally, the customer provided these VLAN to EVC mapping requirements:
* EVC 1 between CE-1 and CE-2 must be provisioned with C-VLAN 12 at the HQ location.
* EVC 2 between CE-1 and CE-3 must be provisioned with C-VLAN 13 at the HQ location.
Which configuration must the network engineer implement on the PE routers to provide end-to-end Carrier Ethernet service to the customer?

Answer: D

NEW QUESTION # 29
Guidelines -
This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.
Topology:

Tasks -
Configure the BGP routing protocol for R1 and R2 according to the topology to achieve these goals:
1. Configure EBGP neighbor adjacency for the IPv4 and IPv6 address family between R1 and R2 using Loopback0 IPv4 and IPv6 addresses. All BGP updates must come from the Loopback0 interface as the source. Do not use IGP routing protocols to complete this task.
2. Configure MD5 Authentication for the EBGP adjacency between R1 and R2. The password is clear text C1sc0!.

Answer:

Explanation:
See the explanation for the solution.
Explanation:
Here is the solution:

NEW QUESTION # 30
......

It will improve your skills to face the difficulty of the 350-501 exam questions and accelerate the way to success in IT filed with our latest study materials. Free demo of our 350-501 dumps pdf can be downloaded before purchase and 24/7 customer assisting support can be access. Well preparation of 350-501 Practice Test will be closer to your success and get authoritative certification easily.

Pdf 350-501 Format: https://www.fast2test.com/350-501-premium-file.html

BONUS!!! Download part of Fast2test 350-501 dumps for free: https://drive.google.com/open?id=1FJW0I0YQ8pA3qCOf6jq4-dyY9GUVjRjm