Profit from the opportunity to get these top-notch exam questions for the Cisco 350-101 certification test. We guarantee you that our top-rated Cisco 350-101 practice exam (PDF, desktop practice test software, and web-based practice exam) will enable you to pass the Cisco 350-101 Certification Exam on the very first go.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
In order to gain the 350-101 certification quickly, people have bought a lot of 350-101 study materials, but they also find that these materials don't suitable for them and also cannot help them. If you also don't find the suitable 350-101 test guide, we are willing to recommend that you should use our 350-101 Study Materials. Because our products will help you solve the problem, it will never let you down if you decide to purchase and practice our 350-101 latest question. And our 350-101 exam questions have a high pass rate of 99% to 100%.
NEW QUESTION # 60
Refer to the exhibit. A retail business is deploying guest wireless across its remote branch locations. Each branch uses FlexConnect APs in local switching mode, and the central wireless LAN controller is configured with an ACL named CWA_REDIRECT. Cisco ISE is configured to return this ACL during the authentication process for central web authentication (CWA). However, when clients attempt to connect to the guest wireless LAN, they are added to the exclusion list.
Which configuration step resolves the connectivity issue?
Answer: D
Explanation:
The failure is caused by the redirect ACL not being available where enforcement occurs. In FlexConnect local switching, client data-plane handling occurs on the AP, so the CWA redirect ACL cannot exist only as a controller ACL or only as a policy-profile reference. Cisco states that the redirect ACL is a punt ACL and that, for FlexConnect local switching, the ACL must be predefined on the AP because the AAA server returns only the ACL name, not the ACL definition.
The exhibit shows Redirect ACL failure and EXCLUDE_PUNT_ACL_FAIL, which aligns with an AP-side punt/redirect ACL application failure. Cisco's Catalyst 9800 CWA configuration specifically requires the redirect ACL definition to be sent through the FlexConnect profile; in the GUI this is done under the Flex Profile Policy ACL tab by adding the ACL, enabling central web authentication, and applying the change. The equivalent CLI is wireless profile flex <profile> followed by acl-policy <acl-name> and central-webauth, after which the AP uses the ACL for client redirection. AP-Join profiles do not carry client redirect ACL policy, and adding the ACL only to the policy profile does not push it to FlexConnect APs for local switching.
NEW QUESTION # 61
An IT team is deploying Meraki APs at a remote branch and must ensure that they are automatically assigned to the correct network in the Meraki dashboard. The branch is scheduled to receive 20 new APs, and site connectivity to headquarters was set up. Before shipping the APs, the team must make sure that each one is claimed by the intended network for management and monitoring. Which deployment action must they take before physically connecting the APs?
Answer: A
Explanation:
When deploying Meraki APs, it is essential to claim each AP in the Meraki dashboard to ensure that they are automatically assigned to the correct network and can be managed remotely. This process involves registering the APs with the Meraki cloud, which is done by adding the AP serial numbers to the network within the Meraki dashboard before physically installing them at the branch.
Option B: "Add the AP serial numbers to the required network within the Meraki dashboard."This is the correct answer. Before the APs are physically connected, the administrator needs to log into the Meraki dashboard and add the serial numbers of the new APs to the intended network. This ensures that once the APs are powered on and connected, they automatically join the correct network and are ready for monitoring and management without requiring further configuration.
Option A: "Activate mesh networking mode for all the new APs before installation."Mesh networking mode is used when APs need to communicate wirelessly to extend coverage, but it is not a requirement for the deployment and registration process. The APs should be connected normally for initial setup, and mesh mode can be enabled later if needed.
Option C: "Preconfigure SSID names and VLAN tags on the local page of each AP in the Meraki dashboard." While configuring SSID and VLAN settings is essential, this is not the first action required for ensuring the APs are claimed by the correct network. The priority is to add the AP serial numbers to the Meraki dashboard for proper network assignment.
Option D: "Create a separate DHCP scope for all the new APs on the local server."DHCP scope configuration is important for assigning IP addresses, but this is not the primary step for ensuring the APs are correctly registered in the Meraki dashboard. The APs can obtain IP addresses from an existing DHCP scope once they are connected and claimed in the dashboard.
Therefore, the best approach isOption B, as it ensures that the APs are correctly assigned to the intended network in the Meraki cloud, ready for management and monitoring once connected.
NEW QUESTION # 62
Which Cisco Ultra-Reliable Wireless Backhaul process enables devices to establish a reliable connection with the next AP along their path before losing connectivity to the current one in a wireless network during roaming?
Answer: A
Explanation:
The correct answer isMake-before-break handover logic. This is a key feature in Cisco's Ultra-Reliable Wireless Backhaul (URWB) process that allows devices to establish a connection to the next AP (Access Point) before disconnecting from the current AP. This seamless transition ensures that there is no disruption in the wireless connection as the client roams between APs, which is especially important in environments where consistent, low-latency connectivity is essential, such as in real-time applications (e.g., voice or video).
Option A (Open roaming)refers to a method of allowing devices to roam freely across networks, but it doesn't address the specific need for a seamless handover process.
Option B (Fast client handoff)refers to methods used to speed up the roaming process, but it doesn't specifically ensure that the next AP is connected before disconnecting from the current one.
Option C (802.11v high speed roaming)is an IEEE standard feature that helps optimize roaming behavior for fast-moving devices, butmake-before-break handover logicis the specific mechanism that allows for a seamless roaming experience.
Therefore,Make-before-break handover logic(Option D) is the correct answer as it directly addresses the need for devices to establish a reliable connection to the next AP during roaming before losing connectivity with the current one.
NEW QUESTION # 63 
Refer to the exhibit. A network engineer is deploying a new Cisco 9800 WLC and is performing the Day-0 setup. The IP address and subnet mask have been assigned to the management interface, and network connectivity between the WLC and the upstream switch has been verified. Which CLI command must the engineer use next to configure management access?
Answer: D
Explanation:
After assigning an IP address to the management interface of a Cisco 9800 WLC, the next step in Day-0 deployment is configuring the default route to ensure management traffic can reach devices outside the local subnet. The correct command isip route 0.0.0.0 0.0.0.0 < gateway > , which establishes a default route for all traffic destined for networks not explicitly known in the routing table. In this case,ip route 0.0.0.0 0.0.0.0
10.1.10.1sets the upstream router at 10.1.10.1 as the default gateway, allowing the WLC to communicate with the broader network for management and client services. Option A,route add default gw, is Cisco IOS classic syntax but not valid in IOS XE WLC CLI. Option B is invalid syntax for default routing. Option C,ip default- gateway, is only used for Layer 2 management devices without routing capabilities, whereas a WLC requires a proper Layer 3 route. Configuring the default route ensures that remote administration, SNMP, syslog, and device registration functions operate correctly. Cisco Wireless Core Technologies recommend this step as part of initial WLC setup to establish full network reachability for management access. Reference topics:Wireless Network Implementation - Day-0 WLC setup, management interface configuration, default route, IP routing in Cisco 9800 IOS XE.
NEW QUESTION # 64
A network administrator at a marketing company manages a Cisco Catalyst 9800 Series Wireless Controller running Cisco IOS XE 17.x. The WLAN named XYZ-Guest is set up for visitors, and the administrator wants to implement a web authentication (WebAuth) portal using an external server to manage guest access. To ensure seamless and secure guest authentication, the controller must be configured to use an external WebAuth server for the WLAN. The administrator must configure the XYZ-Guest WLAN to use an external WebAuth server with a parameter map named webauth-ext. Which set of Cisco IOS XE commands must be used?
Answer: D
Explanation:
On a Cisco Catalyst 9800 WLC, the WLAN is entered with the wlan command, and the WebAuth parameter map is applied under the WLAN using the security web-auth parameter-map command so the guest WLAN uses the configured external WebAuth portal settings.
NEW QUESTION # 65
......
PracticeVCE is the leader in the latest Cisco 350-101 Exam Certification and exam preparation provider. Our resources are constantly being revised and updated, with a close correlation. If you prepare Cisco 350-101 certification, you will want to begin your training, so as to guarantee to pass your exam. As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.
350-101 Interactive Practice Exam: https://www.practicevce.com/Cisco/350-101-practice-exam-dumps.html