BONUS!!! DumpTOP EDGE-Expert 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1zMS3NDwA_oZdJplu_fvvmZ3hjOBUsVC5
우리DumpTOP 사이트에서EDGE EDGE-Expert관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의DumpTOP에 신뢰감을 느끼게 됩니다.빨리 우리 DumpTOP의 덤프를 만나보세요.
| Section | Weight | Objectives |
|---|---|---|
| Software & Methodology | 25% | - EDGE Software Interface
|
| EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Energy Efficiency | 25% | - Energy Consumption
|
| Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
| Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
DumpTOP에는EDGE EDGE-Expert인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. DumpTOP인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.
질문 # 83
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?
정답：C
설명：
The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: "At the post-construction stage, the Client must provide manufacturer's data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements" (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: "Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: "Bills of quantities may support purchase verification, but manufacturer's data sheets are required for technical specifications like U-value and SHGC" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: "Window schedules may indicate glass types, but they do not replace the need for manufacturer's data sheets with U-value and SHGC at post-construction" (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: "For glazing measures, post-construction evidence must confirm the installed product's performance through manufacturer's data sheets, ensuring alignment with the design-stage claims" (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer's data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.
질문 # 84
Which of the following properties of glass are used in EDGE?
정답：A
설명：
In the CBCI EDGE curriculum, glazing performance is characterized using properties that directly influence solar heat gains through windows, because this is a major driver of cooling energy demand in many climates.
The EDGE software uses Solar Heat Gain Coefficient, which represents the fraction of incident solar radiation that enters the building as heat through the glazing system. A lower SHGC reduces solar heat entering the indoor space, lowering cooling loads and improving the project's energy savings in the improved case.
Shading Coefficient is an older metric that is sometimes referenced in market literature, but EDGE standardizes the glazing solar performance input using SHGC for consistency across regions and products.
Solar Heat Loss Coefficient is not a standard glazing metric used in EDGE; heat loss through glazing is addressed using thermal transmittance measures such as U-value rather than an SHLC parameter. Solar Reflectivity may be relevant for certain roof or surface materials, but it is not the primary glazing property used in EDGE to quantify solar heat admitted indoors. Therefore, the correct glass property used in EDGE among the options provided is SHGC.
질문 # 85
When must the registration fee be paid?
정답：C
설명：
The EDGE certification process involves specific steps and fees, including a registration fee, to formally enter a project into the certification system. The EDGE Certification Protocol outlines the timing of the registration fee: "The registration fee must be paid prior to registration of the project in the EDGE system. This fee is required to activate the project in the EDGE App, allowing the Client to begin the self-assessment process and proceed toward certification" (EDGE Certification Protocol, Section 2.1: Registration). Option B, prior to registration, directly matches this requirement, as payment is a prerequisite for starting the certification process. Option A (prior to site audit) is incorrect, as the site audit occurs later, at the post-construction stage:
"The site audit takes place after practical completion, well after registration, so the registration fee is not tied to this stage" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option C (after the registration) is also incorrect, as payment must precede registration: "Registration cannot be completed without payment of the registration fee, ensuring the project is officially entered into the system" (EDGE User Guide, Section 6.1: Project Preparation). Option D (after certification has been awarded) is wrong, as certification occurs at the end of the process, after registration and audits: "Certification fees may be paid after certification, but the registration fee is required at the outset, before any assessment begins" (EDGE Certification Protocol, Section 3.3: Certification Decision). The EDGE User Guide further clarifies: "Paying the registration fee prior to registration ensures that the project is formally recognized by the EDGE system, enabling access to the software and certification resources" (EDGE User Guide, Section 6.1: Project Preparation). Thus, the registration fee must be paid prior to registration (Option B).
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 3.4: Post-Construction Requirements, Section 3.3: Certification Decision; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
질문 # 86
What are the benefits of using a pool cover that are recognized in EDGE?
정답：C
설명：
Pool covers are a water and energy efficiency measure in EDGE, particularly relevant for hotels with swimming pools. The EDGE User Guide outlines their benefits: "Pool covers reduce water demand by minimizing evaporation and energy demand by reducing the need for heating, as they retain heat in the pool.
In EDGE, the use of pool covers is recognized for its dual impact on reducing both water and energy consumption" (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Option B, reduce both water and energy demand, directly aligns with this description. Option A (increase solar control and comfort) is incorrect, as pool covers are not recognized in EDGE for solar control or occupant comfort but for resource savings. Option C (require less maintenance and work from employees) and Option D (reduce chemical consumption and that of cleaning products) are potential secondary benefits but are not quantified or recognized in EDGE calculations, as confirmed by: "EDGE focuses on measurable water and energy savings from pool covers, not on maintenance or chemical use reductions" (EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations). Thus, Option B is the correct answer.
Reference: EDGE User Guide Version 2.1, Section 5.3: Additional Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations.
질문 # 87
What is the application process for an architect with more than three years of professional experience to become an EDGE Auditor?
정답：D
설명：
According to the CBCI EDGE framework, the pathway to becoming an EDGE Auditor is structured to ensure technical competence and familiarity with the EDGE methodology before assuming third-party verification responsibilities. An architect with more than three years of professional experience satisfies the general professional experience requirement; however, this alone is not sufficient to directly become an EDGE Auditor.
The curriculum clarifies that the candidate must first qualify and be recognized as an EDGE Expert. This step ensures that the individual has demonstrated proficiency in using the EDGE software, understands baseline and improved case calculations, and is fully familiar with energy, water, and materials measures within the EDGE Standard. The EDGE Expert credential confirms competence in project modeling and documentation preparation.
Once recognized as an EDGE Expert, the individual can then apply to an accredited EDGE Certification Body or Certifier to become an EDGE Auditor. Auditors operate under Certification Bodies and are responsible for independent design and site audits. They do not apply directly to IFC for this role, nor do they bypass the EDGE Expert stage. Therefore, the correct application process is to first become an EDGE Expert and then apply to a Certifier.
질문 # 88
......
EDGE EDGE-Expert인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.EDGE EDGE-Expert시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리DumpTOP는 여러분들한테EDGE EDGE-Expert시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리DumpTOP의EDGE EDGE-Expert시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.
EDGE-Expert유효한 최신덤프공부: https://www.dumptop.com/EDGE/EDGE-Expert-dump.html
BONUS!!! DumpTOP EDGE-Expert 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1zMS3NDwA_oZdJplu_fvvmZ3hjOBUsVC5