P.S. Free 2026 Huawei H35-580_V2.0 dumps are available on Google Drive shared by Itexamguide: https://drive.google.com/open?id=1iq0lK0TgsdidkNe60EFH46eugAYXgY55
The accuracy rate of Itexamguide H35-580_V2.0 exam certification training materials is high with wide coverage. It not only can improve your cultural knowledge, but also improve your operation level. It not only makes you become IT elite, but also make you have a well-paid job that others admire. Before buying our H35-580_V2.0 Certification Training materials, you can download H35-580_V2.0 free demo and answers on probation on Itexamguide website.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Basic Features of 5G Wireless Networks | 20% | - Flexible Duplex and Spectrum Sharing - 5G QoS and Slicing - Massive MIMO Technology - Beam Management and Optimization |
| Topic 2: 5G Wireless Network Principles | 20% | - 5G NR Overview and Key Technologies - 5G NR Channels and Signals - 5G NR Frame Structure and Physical Resources - 5G NR Mobility and Power Control |
| Topic 3: 5G Base Station Overview and Basic Operations | 10% | - 5G Base Station Installation and Deployment - 5G Base Station Configuration and Commissioning - 5G Base Station Maintenance and Fault Handling - 5G Base Station Products and Hardware Composition |
| Topic 4: Fundamentals of 5G Network Optimization | 30% | - Coverage Optimization - Network Optimization Process and Methods - Performance Monitoring and Evaluation Indicators - Interference Optimization - Capacity and Throughput Optimization - Mobility Optimization |
| Topic 5: Fundamentals of 5G Network Planning | 20% | - 5G Network Planning Process and Principles - Site Survey and Design - Parameter Planning and Configuration - Wireless Environment Analysis and Coverage Planning - Capacity and Interference Planning |
>> H35-580_V2.0 Hot Spot Questions <<
Our H35-580_V2.0 exam materials are formally designed for the exam. With its help, you don't have to worry about the exam any more for it almost guarantees you get what you want. If you think i'm exaggerating, you might as well take a look at our H35-580_V2.0 Actual Exam. With a high pass rate as 98% to 100%, you will be bound to pass the exam. And our H35-580_V2.0 training questions are popular in the market. We believe you will make the right choice.
NEW QUESTION # 21
During uplink scheduling, what is the fixed value of the logical channel guaranteed rate?for each non-GBR logical channel?
Answer: A
Explanation:
The default guaranteed bit rate for non-GBR logical channels is configured as 8 kbps to ensure basic service fairness.
NEW QUESTION # 22
The redirection process has lower service interruption delay than the switching process.
Answer: B
Explanation:
Redirection requires the UE to reselect and establish a new connection, which generally causes longer service interruption. Handover (switching) maintains connection continuity and usually results in lower interruption delay.
NEW QUESTION # 23
For a 60 kHz SCS configuration, how many time slots are included in a radio frame?
Answer: A
Explanation:
For NR:
15 kHz โ 10 slots/frame
30 kHz โ 20 slots/frame
60 kHz โ 40 slots/frame
120 kHz โ 80 slots/frame
Thus, a 60 kHz SCS configuration contains 40 slots per radio frame.
NEW QUESTION # 24
In SA networking, which of the following is the first step for a UE to perform a cell search?
Answer: C
Explanation:
Explanation
According to the 5G SA Cell Search & Network Entry Matrix, the first step for a UE to perform a cell search in SA networking is to synchronize frames and obtain PCI group number. This step involves the following sub-steps:
The UE scans the available frequency range to detect the presence of Synchronization Signal Blocks (SSBs) from different base stations. SSBs are periodic signals that contain essential synchronization and system information for cell search and initial access.
The UE selects an SSB with the strongest signal strength and decodes its Primary Synchronization Signal (PSS) and Secondary Synchronization Signal (SSS). The PSS and SSS are part of the SSB and provide coarse timing synchronization and cell identity information.
The UE uses the PSS and SSS information to synchronize its internal clock with that of the base station and obtain the Physical Cell Identity (PCI) group number. The PCI group number is a 9-bit value that identifies a group of 8 cells that share the same PSS and SSS sequences. The PCI group number ranges from 0 to 1007.
The other steps for a UE to perform a cell search in SA networking are:
Synchronize half-frames and obtain the ID within a PCI group: The UE further synchronizes its timing with the base station by decoding its Narrowband Synchronization Signal (NSSS), which is also part of the SSB. The NSSS provides more precise timing information and the ID within a PCI group, which is a
3-bit value that identifies a specific cell within a PCI group. The ID within a PCI group ranges from 0 to
7. By combining the PCI group number and the ID within a PCI group, the UE can obtain the full PCI, which is a 10-bit value that uniquely identifies a cell.
Obtain other cell information: The UE decodes other signals and channels in the SSB to acquire other cell information, such as system bandwidth, subcarrier spacing, frame structure, etc. These signals and channels include Demodulation Reference Signals (DMRS), Master Information Block (MIB), System Information Block (SIB), etc.
Obtain the cell signal quality: The UE measures the cell signal quality based on various indicators, such as Reference Signal Received Power (RSRP), Reference Signal Received Quality (RSRQ), Signal-to-Interference-plus-Noise Ratio (SINR), etc. These indicators reflect the strength, quality, and interference level of the received signal.
NEW QUESTION # 25
In an intra-frequency reselection procedure, which message contains the rangeToBestCell parameter?
Answer: B
Explanation:
Explanation
According to the 38.331 RRC, SIB2 is the message that contains the rangeToBestCell parameter, which is used for intra-frequency cell reselection. The rangeToBestCell parameter defines a threshold for cell ranking based on RSRP (Reference Signal Received Power). A UE may only reselect to a cell if its RSRP exceeds that of the serving cell by at least rangeToBestCell dB.
NEW QUESTION # 26
......
With H35-580_V2.0 exam dumps from Itexamguide, we provide guaranteed success rate for the H35-580_V2.0. We provide latest and updated question answers for H35-580_V2.0 exam for preparation. You can prepare for the H35-580_V2.0 with our test products including H35-580_V2.0 PDF dumps questions, and test preparation software. You can prepare for the H35-580_V2.0 through practice kits without facing any problem. You can get the desired score for the H35-580_V2.0 and join the list of our satisfied customers. The H35-580_V2.0 test questions and preparation material is prepared by highly skilled certified professionals.
H35-580_V2.0 Authentic Exam Questions: https://www.itexamguide.com/H35-580_V2.0_braindumps.html
What's more, part of that Itexamguide H35-580_V2.0 dumps now are free: https://drive.google.com/open?id=1iq0lK0TgsdidkNe60EFH46eugAYXgY55