Frenquent 300-110 Update - Pass Leader 300-110 Dumps

It is acknowledged that there are numerous 300-110 learning questions for candidates for the 300-110 exam, however, it is impossible for you to summarize all of the key points in so many materials by yourself. But since you have clicked into this website for 300-110 practice materials you need not to worry about that at all because our company is especially here for you to solve this problem. We have a lot of regular customers for a long-term cooperation now since they have understood how useful and effective our 300-110 Actual Exam is.

Cisco 300-110 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Wireless Site Survey	25%	- Pre-deployment survey and validation - Layer 1 site survey execution and analysis - Design requirements collection and constraint evaluation 1. AP and antenna type selection 2. Client density and capacity planning 3. Security requirements definition 4. Real-time application requirements 5. Deployment type considerations - RF propagation and attenuation analysis
Topic 2: Mobility Design	25%	- Mobility architecture models 1. Anchor and foreign controller design 2. Layer 2 and Layer 3 roaming 3. Mobility groups and domains - Guest mobility and BYOD design - Roaming optimization 1. Fast Secure Roaming 2. 802.11r/k/v standards implementation
Topic 3: Wireless Infrastructure Design	30%	- Wired-wireless integration design 1. VLAN and QoS design 2. PoE and power planning 3. Switching infrastructure requirements - High-density wireless design 1. Channel planning and power management 2. Co-channel interference mitigation 3. Capacity optimization techniques - Wireless Controller architecture and deployment 1. AP modes and deployment options 2. Redundancy and high availability design 3. Controller models and scalability
Topic 4: WLAN High Availability and Security Design	20%	- Security architecture design 1. Wireless intrusion prevention design 2. Authentication and authorization frameworks 3. Encryption and privacy mechanisms - Management and monitoring design - High availability design 1. Controller failover and stateful switchover 2. AP redundancy and resiliency 3. N+1 and N+N redundancy models

>> Frenquent 300-110 Update <<

Pass Leader 300-110 Dumps - 300-110 Reliable Test Experience

The web-based Designing Cisco Wireless Networks (300-110) practice exam is accessible from any major OS, including Mac OS X, Linux, Android, Windows, or iOS. These Cisco 300-110 exam questions are browser-based, so there's no need to install anything on your computer. Chrome, IE, Firefox, and Opera all support this Cisco 300-110 web-based practice exam. You can take this Designing Cisco Wireless Networks (300-110) practice exam without plugins and software installation.

Cisco Designing Cisco Wireless Networks Sample Questions (Q54-Q59):

NEW QUESTION # 54
A customer has a single anchor WLC named Anchor A. Anchor A is in a DMZ and provides guest access.
The customer wants to deploy an additional anchor controller named Anchor B to provide redundancy if Anchor A fails. Which design approach should be taken for the guest WLAN priority on the foreign WLC for each anchor WLC?

A. Set Anchor A to priority 1 and Anchor B to priority 3.
B. Set Anchor A to priority 3 and Anchor B to priority 1.
C. Set Anchor A to priority 1 and Anchor B to priority 1.
D. Set Anchor A to priority 3 and Anchor B to priority 3.

Answer: A

Explanation:
In a wireless network design where anchor redundancy is required for guest access, setting different priorities for the anchor controllers ensures deterministic primary and backup behavior. Cisco anchor priority uses a lower numerical value to indicate higher preference - Priority 1 is the highest priority (most preferred) anchor, and Priority 3 is lower priority. Setting Anchor A to priority 1 (Option D) makes it the primary anchor controller - all new guest client sessions will preferentially anchor to Anchor A. Setting Anchor B to priority
3 makes it the standby anchor - guest clients will only be anchored to Anchor B when Anchor A is unavailable. This creates a clear primary/backup relationship with deterministic failover. Setting both anchors to the same priority (Options A and C) would result in load balancing between the two anchors rather than active/standby behavior. Option B incorrectly reverses the priorities, making Anchor B the primary and Anchor A the backup. Reference: WLSD Study Guide - Guest Anchor Redundancy Design, Anchor Priority Configuration, DMZ Anchor WLC Architecture.

NEW QUESTION # 55
An enterprise is using wireless as the main network connectivity for clients. To ensure wireless network availability, two standalone controllers are installed in the head office. APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried eping from the controller but fails.
Which protocol needs to be allowed between the networks that the controllers are installed?

A. IP Protocol 87
B. IP Protocol 67
C. IP Protocol 97
D. IP Protocol 77

Answer: C

Explanation:
When eping (EoIP ping) fails between two Cisco Wireless LAN Controllers, it indicates that the data path of the mobility tunnel is blocked. In Cisco AireOS wireless networks, the mobility data path uses IP Protocol 97 (EtherIP -- Ethernet-over-IP encapsulation) for tunneling client traffic between the anchor and foreign controllers. This is distinct from the control path, which uses UDP port 16666. When the mobility data path (IP Protocol 97) is blocked by a firewall or ACL between the two controllers' networks, eping will fail because eping specifically tests the EoIP data encapsulation path. After a power cut, when clients disconnect and attempt to roam between APs on different controllers, the mobility tunnel must be operational for session continuity. If IP Protocol 97 is blocked, the mobility data plane cannot function, causing client disconnections during inter- controller roaming events. The other IP protocols listed (67, 77, 87) are not used for Cisco WLC mobility tunneling.

NEW QUESTION # 56
An engineer must identify the network requirements for a company that has a main office and 10 branch offices. The network must be able to support data, voice, video, and location tracking. Which two factors must be considered? (Choose two.)

A. number of wireless devices that require access
B. business type of the company
C. type of site for which the survey will be performed
D. available power sockets in the IT room
E. security policy of the company for building access

Answer: A,C

Explanation:
When designing a wireless network to support diverse services - including data, voice, video, and location tracking - across a distributed enterprise with a main office and 10 branch locations, the two primary design factors directly shaping the RF and capacity architecture are the number of wireless devices requiring access and the type of site where the survey will be performed. The device count (Option B) drives AP density, channel reuse planning, capacity modeling, and controller licensing requirements. Each service type - particularly VoWLAN and video - imposes strict per-client throughput and latency constraints that must be multiplied across the concurrent device population. The type of site (Option C) determines the survey approach, attenuation characteristics, coverage requirements, and antenna selection. A warehouse, hospital, or open-plan office each demands a fundamentally different RF design. Options A and D are organizational considerations, not technical RF design inputs. Option E (power sockets) is an installation logistics concern, not a wireless design factor. Reference: WLSD Study Guide - Requirements Gathering, Site Survey Planning, Capacity and Coverage Design Methodology.

NEW QUESTION # 57
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?

A. Set the XOR radio role to Client Serving and the slot 1 radio to Sniffer mode on all the APs.
B. Set the XOR radio role to Sniffer mode and the slot 1 radio to Client Serving on all the APs.
C. Set the XOR radio role to Client Serving and the slot 1 radio to Monitor mode on all the APs.
D. Set the XOR radio role to Monitor mode and the slot 1 radio to Client Serving on all the APs.

Answer: D

Explanation:
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity - it must remain in Client Serving mode to maintain uninterrupted 5 GHz WLAN service. The XOR radio (slot 0), currently either idle or operating as a secondary 5 GHz radio, can be repurposed without impacting client service. Setting the XOR radio to Monitor mode enables it to continuously scan all channels across both the 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. In Monitor mode, the XOR radio operates full-time as a dedicated scanner, providing rogue detection coverage on 2.4 GHz (previously uncovered since all services were 5 GHz) and supplementary scanning on 5 GHz. This eliminates the need for additional dedicated monitor mode APs. Options A, C, and D either place the slot 1 radio in a non-client-serving role (disrupting existing connectivity) or use the inappropriate Sniffer mode instead of Monitor mode for rogue detection. Reference: WLSD Study Guide - Cisco 2800 XOR Radio Architecture, Monitor Mode for Rogue Detection, Flexible Radio Assignment, WIDS Design.

NEW QUESTION # 58
A community bank has three campus locations and one HQ with the data center. Each campus has four Cisco Catalyst 9120 APs. Poor WAN uplinks cause impacted connectivity back to HQ, and each campus is planned to have its own EWC controller based on C9120 AP to keep traffic local. Guest WLAN will be routed locally.
Employee WLAN must be authenticated 802.1x PEAP via HQ ISE but can pass traffic locally once authenticated. HQ WLC will be the primary backup WLC for each WLC. Which design approach should the consulting engineer take?

A. One C9120 AP in each campus must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN, and employee WLAN will need the HQ AAA server to be added to EWC.
B. Two C9120 campus APs must be converted to EWC mode, one for the active controller and the other for standby set as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN, and employee WLAN will need the HQ AAA server added to EWC.
C. Two C9120 campus APs must be converted to EWC mode, one for the active controller and the other for standby with HQ WLC as N+1 backup. The campus guest WLAN will use the guest anchor to HQ WLC for guest VLAN access, and employee WLAN will need the HQ AAA server added to EWC.
D. One C9120 campus AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC paired as mobility peer and configured as N+1 backup. The campus guest WLAN will use local web auth on guest VLAN. The campus employee WLAN will need the guest anchor back to the HQ employee WLAN.

Answer: A

Explanation:
This community bank design scenario requires precise alignment of EWC deployment scale, AAA integration, and traffic routing decisions with the stated constraints. With four APs per campus and a goal of local traffic handling, converting a single C9120 to EWC mode is optimal - converting two APs to EWC (Options B and C) on a four-AP campus wastes 50% of campus AP infrastructure for controller functions rather than client service. The single EWC AP serves as the active local controller for the remaining three client-serving APs. The HQ WLC set as N+1 backup ensures that if the branch EWC fails, the remaining APs fall back to the centralized controller. For the guest WLAN, local web authentication on the guest VLAN provides the locally routed guest access requirement without requiring WAN connectivity to HQ. For the employee WLAN, adding the HQ ISE AAA server to the EWC ' s RADIUS configuration enables 802.1x PEAP authentication to traverse the WAN to ISE at the time of client association. Once authenticated, traffic is locally switched - satisfying both the central authentication and local traffic routing requirements simultaneously. Option D ' s use of guest anchor for the employee WLAN is architecturally incorrect and would route traffic through HQ rather than locally. Reference: WLSD Study Guide - EWC Design, N+1 Redundancy, AAA Integration for Branch WLANs, Local Web Authentication.

NEW QUESTION # 59
......

As the employment situation becoming more and more rigorous, it’s necessary for people to acquire more 300-110 skills and knowledge when they are looking for a job. Enterprises and institutions often raise high acquirement for massive candidates, and aim to get the best quality talents. Thus a high-quality 300-110 Certification will be an outstanding advantage, especially for the employees, which may double your salary, get you a promotion. So choose us, choose a brighter future.

Pass Leader 300-110 Dumps: https://www.actualtestsit.com/Cisco/300-110-exam-prep-dumps.html