P.S. Free & New VNX301 dumps are available on Google Drive shared by Pass4sures: https://drive.google.com/open?id=1sQo9wtqfZ6uoaXDTVcknRoP8BsQ4EnWQ
Hence, memorizing them will help you get prepared for the Versa Networks VNX301 examination in a short time. The product of Pass4sures comes in PDF, desktop practice exam software, and Versa Certified SD-WAN Specialist (VNX300) (VNX301) web-based practice test. To give you a complete understanding of these formats, we have discussed their features below.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified SD-WAN Specialist |
| Exam Number: | VNX301 |
| Real Exam Qty: | 60 |
| Passing Score: | 70% |
| Exam Format: | Multiple Select, Multiple Choice |
| Certificate Validity Period: | 3 years |
| Available Languages: | English |
| Related Certifications: | Versa Certified SD-WAN Expert |
| Exam Duration: | 90 minutes |
| Exam Price: | USD 250 |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored exam at Pearson VUE test centers |
| Pre Condition: | Recommended: Basic networking knowledge (CCNA/equivalent), familiarity with WAN technologies and enterprise network design |
| Official Syllabus URL: | https://www.versa-networks.com/partners/training-certification.html |
>> VNX301 Latest Learning Material <<
The language in our VNX301 test guide is easy to understand that will make any learner without any learning disabilities, whether you are a student or a in-service staff, whether you are a novice or an experienced staff who has abundant experience for many years. Our VNX301 Exam Questions are applicable for everyone in all walks of life which is not depends on your educated level. Therefore, it should be a great wonderful idea to choose our VNX301 guide torrent for sailing through the difficult test and pass it.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 54
You are configuring the BGP routing protocol between a Versa Secure SD-WAN CPE with AS number
64514 and two upstream service providers: SP1 with AS number 64515 and SP2 with AS number 64519. You want to prefer BGP routes learned from AS 64515 over routes learned from AS 64519. Which BGP path attribute would be used to accomplish this task?
Answer: C
Explanation:
The correct answer is LOCAL_PREF . In BGP, the Local Preference attribute is used inside an autonomous system to influence which exit path is preferred for outbound traffic. In this scenario, the Versa Secure SD- WAN CPE receives routes from two upstream service providers, SP1 and SP2. To prefer routes learned from AS 64515 over routes learned from AS 64519, you would apply a BGP import or route policy that assigns a higher local preference to routes received from SP1. Versa SD-WAN design guidance shows this exact routing concept: an import policy can manipulate the Local-Pref attribute to prefer one advertised route path over another. The Versa output examples also display "Local Preference" as a BGP route attribute used in route selection.
MULTI_EXIT_DISC, or MED, is generally used to influence how a neighboring AS enters your AS, not how your CPE prefers routes learned from different upstreams. ORIGIN is part of BGP best-path selection but is not normally the administrative tool used to prefer one provider. NEXT_HOP identifies the next-hop address and does not directly define route preference.
NEW QUESTION # 55
You are configuring a CGNAT rule for branch internet access and want to verify which access-list entry will match traffic before translation. Which information is shown by the CGNAT ACL command?
Answer: A
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation shows the command show cgnat acl info < tenant-id > for viewing CGNAT access lists used for traffic matching. The example output includes columns such as ACL handle , RuleId , Category , Precedence , VRF , Source IP , and Destination IP . It also shows tenant ID and total filters.
This command is useful when a CGNAT rule exists in configuration but sessions are not being translated. By checking the ACL output, the administrator can confirm whether the correct source prefix, destination prefix, VRF, and rule precedence are actually programmed in the dataplane. If the wrong VRF or subnet is shown, the rule may never match the intended traffic.
System uptime and CPU usage are operational health indicators. SLA metrics are SD-WAN path- quality values. BGP AS path and local preference are routing attributes. None of these directly show CGNAT access-list match programming.
NEW QUESTION # 56
You are troubleshooting a branch that cannot form SD-WAN overlay tunnels. The branch has WAN interfaces up, but you suspect remote endpoint objects were not learned. Which VSM command should you use to verify whether remote site objects were learned from BGP or from configuration?
Answer: D
Explanation:
The correct answer is A . Versa data-path troubleshooting documentation gives a specific VSM control-plane workflow for checking SD-WAN tunnel objects. After connecting to the VSM daemon, administrators can use show vsm p2mp local-tunnel-sites 0 to inspect local site objects. To check whether remote site objects were learned from BGP or from configuration , Versa instructs administrators to issue show vsm p2mp tunnel-remote-endpoint tenant < tenant-id > on the VSM control plane.
This command is highly relevant when local WAN interfaces are operational, but overlay tunnel formation is incomplete. It shows remote endpoints such as Controllers, hubs, or branches, along with site type, site name, branch ID, tenant ID, remote WAN link information, and tunnel state-related fields.
show interfaces brief confirms interface state and IP addresses, but it does not show learned remote SD- WAN endpoint objects. CGNAT summary is unrelated to tunnel endpoint learning. System storage is useful for disk checks, but not for SD-WAN overlay endpoint troubleshooting.
NEW QUESTION # 57
A CGNAT rule is configured, but traffic is not being translated. You want to confirm whether the expected source and destination prefixes are programmed in the CGNAT access list for the tenant. Which command is most appropriate?
Answer: C
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation states that, after connecting to the vsmd daemon, administrators can view CGNAT access lists used for traffic matching with the command show cgnat acl info < tenant-id > . The sample output shows ACL handle, rule ID, category, precedence, VRF, source IP, destination IP, tenant ID, and total filters.
This is the correct command when NAT configuration appears present but translations do not occur, because it verifies whether the runtime dataplane has the correct traffic-match rules. If the source prefix, destination prefix, VRF, or precedence is wrong, the session may never match the NAT rule, and no translation will be applied.
show system status checks system services. show device clients shows active and failed sessions, CPU usage per session, and memory load for processes. show system storage shows disk usage. These commands are useful in other troubleshooting workflows, but they do not validate CGNAT ACL matching criteria for tenant traffic.
NEW QUESTION # 58
You are asked to ensure symmetric traffic flows between two SD-WAN branches. Which feature should be enabled to achieve this objective?
Answer: C
Explanation:
Symmetric Forwarding is the correct Versa SD-WAN feature for ensuring that return traffic between SD- WAN branches follows the same SD-WAN path on which the forward traffic was received. Versa documentation for SD-WAN traffic steering describes Symmetric forwarding as the option that specifies the path for reverse-direction traffic, meaning whether traffic returning from the destination branch to the originating branch should be sent on the same path on which it arrived. It further states that enabling symmetric traffic forwarding determines the reverse path for traffic returning from the destination branch to the originating branch.
This is different from Symmetric Routing, which is a routing design goal or behavior, not the Versa SD- WAN forwarding-profile feature named in the product documentation. Equal-Cost Multipath can distribute flows across equal-cost routes, but it does not specifically guarantee that both directions of the same SD-WAN session use the same path. Packet Striping is used to split or distribute packets across multiple links for performance, not to enforce bidirectional path symmetry. Therefore, the verified Versa feature to enable is Symmetric Forwarding.
NEW QUESTION # 59
......
Exam VNX301 Questions Fee: https://www.pass4sures.top/Administrator-SD-WAN-Specialist/VNX301-testking-braindumps.html
DOWNLOAD the newest Pass4sures VNX301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1sQo9wtqfZ6uoaXDTVcknRoP8BsQ4EnWQ