New 300-610 Test Sims - Pass 300-610 Test

2026 Latest Prep4sureExam 300-610 PDF Dumps and 300-610 Exam Engine Free Share: https://drive.google.com/open?id=1tWcPIw5HITyfo1Th84aPLBsfFcTHPtUW

No doubt the Designing Cisco Data Center Infrastructure (300-610) certification is one of the most challenging certification exams in the market. This Designing Cisco Data Center Infrastructure (300-610) certification exam gives always a tough time to Designing Cisco Data Center Infrastructure (300-610) exam candidates. The Prep4sureExam understands this hurdle and offers recommended and real Cisco 300-610 Exam Practice questions in three different formats. These formats hold high demand in the market and offer a great solution for quick and complete Designing Cisco Data Center Infrastructure (300-610) exam preparation.

Cisco 300-610 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: Compute Design25%- Storage connectivity design
  • 1. Direct-attached storage options
  • 2. Fabric interconnect modes
  • 3. Bandwidth and oversubscription
- Hyperconverged infrastructure design
  • 1. HX for virtualization
  • 2. Cluster mode design
- Ethernet connectivity design
  • 1. Fabric interconnect modes
  • 2. Bandwidth and oversubscription
  • 3. Redundancy and high availability
- Network virtualization: Cisco VIC adapters
  • 1. vCon placement policies
  • 2. Ethernet and Fibre Channel adapter policies
  • 3. Interface and uplink design
Topic 2: Storage Network Design20%- FCoE and Fibre Channel interface design
  • 1. Port types
  • 2. Oversubscription
  • 3. ISL design
  • 4. Dedicated / shared mode
- iSCSI deployment planning: multipathing, addressing
- SAN topology evaluation
- QoS requirements: Fibre Channel, FCoE, FCIP, iSCSI
Topic 3: Automation Design20%- Network orchestration and automation
  • 1. NX-API
  • 2. Model-driven programmability
  • 3. Ansible, Puppet, Python
  • 4. Intersight
  • 5. DCNM
- Compute orchestration and automation
  • 1. Service profile templates
  • 2. vNIC / vHBA templates
  • 3. Global vs local policies
Topic 4: Network Design35%- Device and routing virtualization: VDC, VRF
- Layer 3 connectivity design options
  • 1. IP mobility
  • 2. Convergence
  • 3. Services insertion
  • 4. Redundancy and high availability
- Management connectivity: in-band, out-of-band
- Data center interconnect design: VXLAN EVPN, OTV
- Redundancy and disaster recovery design
- Layer 2 connectivity design options
  • 1. Endpoint mobility
  • 2. Convergence
  • 3. Services insertion
  • 4. Redundancy and high availability
- Data center technologies: vPC, vPC+

>> New 300-610 Test Sims <<

Pass Guaranteed 2026 Latest Cisco 300-610: New Designing Cisco Data Center Infrastructure Test Sims

Our online version of 300-610 learning guide does not restrict the use of the device. You can use the computer or you can use the mobile phone. You can choose the device you feel convenient at any time. Once you have used our 300-610 exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use 300-610 Exam Training at your own right. Our 300-610 exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use 300-610 test guide, you can enter the learning state.

Cisco Designing Cisco Data Center Infrastructure Sample Questions (Q349-Q354):

NEW QUESTION # 349
Refer to the exhibit. An engineer must design a solution that facilitates IP mobility and avoids hair pinning between DC1 and DC2 in an active/active data center design. The current environment implements stretched subnets advertised to the WAN by both data centers. Which solution must the engineer choose?

Answer: B


NEW QUESTION # 350
Drag the appropriate from the left onto the current UDLD modes of operation on the right.

Answer:

Explanation:


NEW QUESTION # 351
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

Answer: D

Explanation:
Section: Compute Design


NEW QUESTION # 352
An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?

Answer: A

Explanation:
Reference:


NEW QUESTION # 353
Refer to the exhibit During a synchronization of port rotes, a device receives a proposal message on one of its ports that is selected as the new root port. The logs show that Rapid PVST+forced all other ports to synchronize with the new loot information. The engineer analyzes the port stales and concludes that the device is synchronized with superior root information received on the root port, and all other ports are synchronized. What happens to a designated port that is in the forwarding state and is not configured as an edge port, if Rapid PVST+ forces it to synchronize with new root information?

Answer: B


NEW QUESTION # 354
......

The pass rate is 98.65% for 300-610 study guide, and you can pass the exam just one time. In order to build up your confidence for the exam, we are pass guarantee and money back guarantee. If you fail to pass the exam by using 300-610 exam braindumps of us, we will give you full refund. Besides, 300-610 learning materials are edited and verified by professional specialists, and therefore the quality can be guaranteed, and you can use them at ease. We have online and offline service. If you have any questions for 300-610 Exam Materials, you can consult us, and we will give you reply as quick as possible.

Pass 300-610 Test: https://www.prep4sureexam.com/300-610-dumps-torrent.html

DOWNLOAD the newest Prep4sureExam 300-610 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1tWcPIw5HITyfo1Th84aPLBsfFcTHPtUW