P.S. Free & New JN0-336 dumps are available on Google Drive shared by Pass4SureQuiz: https://drive.google.com/open?id=1NCVNyIORx0TmaW7lPe1YFBd3vkGxgwOK
Our Security, Specialist (JNCIS-SEC) (JN0-336) exam questions are being offered in three easy-to-use and compatible formats. This JN0-336 exam dumps formats offer a user-friendly interface and are compatible with all devices, operating systems, and browsers. The Pass4SureQuiz Security, Specialist (JNCIS-SEC) (JN0-336) PDF questions file contains real and valid Juniper JN0-336 exam questions that assist you in JN0-336 exam dumps preparation and boost the candidate's confidence to pass the challenging Security, Specialist (JNCIS-SEC) (JN0-336) exam easily.
| Section | Weight | Objectives |
|---|---|---|
| UTM (Unified Threat Management) | 15% | - Antispam - Content Filtering - Web Filtering - Antivirus |
| IPsec VPNs | 25% | - Policy-Based VPNs - IKE Phase 1 and Phase 2 - Route-Based VPNs - VPN High Availability - VPN Troubleshooting |
| High Availability Clustering | 20% | - Chassis Cluster Architecture - Failover Behavior - Configuration and Troubleshooting - Control and Data Plane Synchronization |
| Screen Options | 15% | - Screen Options Configuration - Custom Screen Options - Attack Detection and Mitigation |
| Security Policy | 25% | - Policy Scheduling - Policy Troubleshooting - Policy Logging - Policy Components and Structure |
We believe our JN0-336 exam questions will meet all demand of all customers. If you long to pass the exam and get the certification successfully, you will not find the better choice than our JN0-336 preparation questions. Now you can have a chance to try our JN0-336 study braindumps before you pay for them. There are the free demos on our website for you download to check the quality and validity of our JN0-336 practice engine. Just have a try, then you will fall in love with our JN0-336 learning quiz!
NEW QUESTION # 53
What is a function of the Juniper Identity Management Service?
Answer: D
Explanation:
The correct answer is D. maintaining a centralized authentication table. Juniper Identity Management Service, or JIMS, is used with SRX Series Firewalls to collect user-identity information from identity sources such as Microsoft Active Directory, domain controllers, and Exchange servers, then provide that identity data to SRX enforcement points. Juniper describes JIMS as storing IP address, username, and group-relationship information in its cache and generating authentication entries used for user-based or group-based access control on SRX firewalls. Juniper's Identity-Aware Firewall documentation also states that the authentication table contains the IP address, username, and group mapping information used as the authentication source.
Option A is wrong because JIMS is not an email-encryption service. Option B is wrong because malicious- code logging belongs to security inspection features such as antivirus, IDP, or ATP workflows, not JIMS.
Option C is wrong because network data encryption is handled by technologies such as IPsec VPN or SSL
/TLS, not identity management. JIMS exists to centralize identity-to-IP mapping so identity-aware security policies can match users and groups instead of relying only on source IP addresses. Reference topics: Identity- Aware Security Policies, JIMS, authentication table, user-to-IP mapping, group-based policy enforcement.
NEW QUESTION # 54
You are asked to onboard an SRX Series device to Junos Space Security Director, but it is not working.
In this scenario, what are three areas that should be reviewed? (Choose three.)
Answer: A,B,E
Explanation:
The correct answers are B, D, and E. Security Director device onboarding depends on management reachability and valid administrative access. Juniper's device discovery documentation states that Junos Space discovers network devices using SSH, with optional ping and SNMP, and connects to the physical device to retrieve running configuration and status information. It also explains that device authentication uses administrator login credentials, SSH credentials, SNMP settings, or keys depending on the discovery method.
Option E is required because Security Director must target a reachable management IP address or hostname.
Juniper's discovery-profile workflow explicitly uses the target IP address, hostname, IP range, or subnet to locate devices. Option D is required because invalid username/password or insufficient privileges prevent discovery and management; Juniper's device-management guidance identifies credentials as required input for discovering devices. Option B is required because onboarding uses SSH, so the correct SSH service and port must be reachable. Juniper's device access procedure explicitly includes a Port field for the SSH connection.
Option A is wrong because chassis serial number is not the normal troubleshooting field for Security Director discovery. Option C is wrong because active security policies do not determine whether Security Director can initially discover and onboard the device. Reference topics: Security Director, device discovery, SSH access, management IP reachability, authentication credentials.
NEW QUESTION # 55
You are asked to configure your company SRX Series device to use identity-aware security policies.
Information about your Active Directory network is shown in the exhibit.
In this scenario, why must you configure JIMS instead of Active Directory as an identity source?
Answer: D
Explanation:
The correct answer is D. You have too many domain controllers. The exhibit shows 15 Active Directory domain controllers. Juniper's integrated Active Directory identity-source configuration for SRX identity- aware firewall supports a limited number of domain controllers; Juniper documentation states that an SRX Series device can configure a maximum of 10 domain controllers for Active Directory identity-source integration. Because this environment has 15 domain controllers, the direct Active Directory identity-source method exceeds the supported scale and JIMS must be used instead.
Option A is wrong because SRX devices can use Active Directory directly as an identity source; JIMS is not the only possible method. Option B is wrong because 1,500 users does not exceed the relevant identity-source scale shown here; Juniper documentation also notes probe functionality support well above this number.
Option C is wrong because the issue being tested is not the Windows Server version. JIMS is designed for larger identity-aware deployments and can centralize identity collection from Active Directory, domain controllers, Exchange servers, and syslog sources, then provide identity mappings to SRX firewalls. Juniper's JIMS datasheet shows much higher scale, including up to 100 active directories, 25 domains, and 500,000 user entries. Reference topics: Identity-Aware Security Policies, Active Directory identity source limits, JIMS scalability, domain controller scale limitations.
NEW QUESTION # 56
Which two statements are correct about redundant fabric interfaces in a chassis cluster? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and C. In an SRX chassis cluster, the fabric connection is represented by two logical fabric interfaces: fab0 and fab1. Juniper configuration examples show fab0 assigned to the node0-side fabric member interface and fab1 assigned to the node1-side fabric member interface; for example, Juniper shows fab0 using a node0 interface such as ge-0/0/1 and fab1 using a node1 interface such as ge-7/0/1. That eliminates option A, because fab0 and fab1 are not both independently located on both nodes; they represent the two node sides of the cluster fabric link.
Option C is also correct. Juniper states that only the same type of interfaces can be configured as fabric children, and for dual fabric links both child interface types should match, such as Gigabit Ethernet with Gigabit Ethernet or 10-Gigabit Ethernet with 10-Gigabit Ethernet. Option D is therefore wrong because mixed media types are not supported for the redundant fabric child interfaces. Reference topics: HA Clustering, chassis cluster fabric interfaces, fab0/fab1, redundant fabric links, fabric child interface requirements.
NEW QUESTION # 57
Which solution enables you to create security policies that include user and group information?
Answer: B
Explanation:
The solution that enables you to create security policies that include user and group information is JIMS (Juniper Identity Management Service). JIMS collects and maintains a large database of user, device, and group information from Active Directory domains or syslog sources, and enables SRX Series devices to rapidly identify thousands of users in a large, distributed enterprise. With JIMS, you can create security policies that include user and group information, and enforce user-based access control policies to protect network resources.
NEW QUESTION # 58
......
Pass4SureQuiz is a reliable platform to provide candidates with effective JN0-336 study braindumps that have been praised by all users. For find a better job, so many candidate study hard to prepare the JN0-336 exam. It is not an easy thing for most people to pass the JN0-336 exam, therefore, our website can provide you with efficient and convenience learning platform, so that you can obtain the JN0-336 certificate as possible in the shortest time. Just study with our JN0-336 exam questions for 20 to 30 hours, and then you will be able to pass the JN0-336 exam with confidence.
JN0-336 Exam Sample Online: https://www.pass4surequiz.com/JN0-336-exam-quiz.html
DOWNLOAD the newest Pass4SureQuiz JN0-336 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1NCVNyIORx0TmaW7lPe1YFBd3vkGxgwOK