Studying from an updated practice material is necessary to get success in the Fortinet NSE7_SSE_AR-26 certification test on the first try. If you don't adopt this strategy, you will not be able to clear the Fortinet NSE 7 - FortiSASE 26 Architect (NSE7_SSE_AR-26) examination. Failure in the Fortinet NSE 7 - FortiSASE 26 Architect (NSE7_SSE_AR-26) test will lead to loss of confidence, time, and money.
| Section | Objectives |
|---|---|
| Operations and Troubleshooting | - Troubleshooting deployment and connectivity - Log analysis - Centralized management - Monitoring and analytics |
| Policy and Security Services | - Web filtering - Threat protection - DNS filtering - Application control - Security policy design |
| FortiSASE Architecture and Design | - Design secure SaaS access (SSA) - Design secure internet access (SIA) - Design secure private access (SPA) - Select appropriate deployment models |
| Identity and Access | - Zero Trust Network Access (ZTNA) - Endpoint posture and compliance - Authentication and identity providers |
| Integration | - SD-WAN integration - Enterprise networking scenarios - FortiGate integration |
>> Reliable NSE7_SSE_AR-26 Practice Materials <<
You can now get Fortinet NSE7_SSE_AR-26 exam certification our Exam4Docs have the full version of Fortinet NSE7_SSE_AR-26 exam. You do not need to look around for the latest Fortinet NSE7_SSE_AR-26 training materials, because you have to find the best Fortinet NSE7_SSE_AR-26 Training Materials. Rest assured that our questions and answers, you will be completely ready for the Fortinet NSE7_SSE_AR-26 certification exam.
NEW QUESTION # 112
What is the primary purpose of thin-branch SD-WAN design in a FortiSASE architecture?
Answer: A
NEW QUESTION # 113
An administrator configures the performance service-level agreement (SLA) with the probe mode, Prefer Passive.
What are two observable impacts of this configuration? (Choose two.)
Answer: C,D
Explanation:
FortiGate provides three primary SD-WAN health-monitoring modes: Active, Passive, and Prefer Passive.
Prefer Passive combines live-session measurements with active probes when sufficient application traffic is unavailable.
Option B is correct because FortiGate measures performance passively when qualifying TCP sessions traverse an SD-WAN member. It derives latency, jitter, and packet-loss measurements from actual TCP session behavior rather than relying exclusively on synthetic probes.
Option E is correct because passive measurements alone cannot reliably determine whether an otherwise idle interface is completely unreachable. In Prefer Passive mode, FortiGate uses active probing when no suitable TCP traffic has been observed for three continuous minutes. Active probes can then identify dead members.
Option A is incorrect because ordinary ICMP traffic does not provide the TCP session information required for this passive measurement mechanism.
Option C reverses the transition logic. The three-minute timer applies to the absence of TCP traffic before switching from passive to active monitoring. FortiGate returns to passive monitoring when eligible TCP traffic becomes available.
Option D is incorrect because enabling passive-wan-health-measurement disables automatic ASIC offloading for the affected firewall policy, allowing the CPU to observe the session characteristics necessary for passive measurement.
References: FortiOS 7.6 Administration Guide - Passive WAN Health Measurement and Performance SLA Overview; Fortinet Technical Tip - Different Types of Health Checks Used in SD-WAN.
NEW QUESTION # 114
Refer to the exhibit. How does FortiGate handle the traffic with the source IP 10.0.1.130 and the destination IP 128.66.0 125?
Exhibit 1
Answer: B
Explanation:
The matching router policy uses set action deny, which is not equivalent to a firewall security-policy deny.
Within config router policy, the deny action stops policy-route processing and returns the packet to normal forwarding-information-base route evaluation. Both source 10.0.1.130 and destination 128.66.0.125 match the configured policy-route ranges. FortiGate therefore uses the FIB to select forwarding, subject to a valid route and an accepting firewall policy. The candidate answer key incorrectly claims SD-WAN load balancing, and its explanation incorrectly claims the traffic is dropped. Both contradict FortiOS policy-route semantics.
Reference: FortiOS 7.6 CLI Reference - config router policy, action deny; Fortinet Technical Tip - Stop Policy Route. An operational review should distinguish the rule that matches the traffic from the interface that is ultimately selected. Valid forwarding also depends on destination route eligibility, current member state and the applicable SLA or quality-selection algorithm. A diagnostic showing configured members alone is not conclusive evidence that all those members will carry a particular flow.
References: https://docs.fortinet.com/document/fortigate/7.6.2/cli-reference/796289482/config-router-policy
NEW QUESTION # 115
Refer to the exhibit. Which statement best describe the role of the ADVPN device in handling traffic?
Exhibit 1
Answer: A
Explanation:
The IKE debug shows processing notify type SHORTCUT_QUERY, recv shortcut-query and forward shortcut-query. These commands identify a hub receiving ADVPN shortcut discovery signaling from a spoke and forwarding it toward another spoke. A spoke that merely receives a shortcut query would not be characterized by the explicit forwarding record in the same manner. The output does not establish a two- region topology or a completed direct shortcut. The candidate key identifying a spoke contradicts the forwarded-shortcut-query diagnostic evidence. Reference: FortiOS 7.6 - ADVPN Shortcut Establishment and IKE Debugging. FortiManager templates reduce repetitive work but must resolve to valid, device-specific configurations at installation time. Device assignments, metadata mappings, ADOM scope, policy-package interfaces and provisioning order should be inspected together rather than troubleshooting any one object in isolation. A successful management connection does not guarantee a successful configuration installation.
Review the installation preview and task log, then validate the resulting device configuration and operational diagnostics. This separates a deployment-time validation failure from a live tunnel, routing or SLA fault.
References: https://docs.fortinet.com/document/fortigate/latest/sd-wan-sd-branch-architecture-for-mssps
/704416/advpn-2-0
NEW QUESTION # 116
Which two matching traffic criteria are available to steer traffic in SD-WAN rules?
Answer: B,D
Explanation:
FortiGate SD-WAN uses traffic-classification criteria to identify application flows and apply appropriate forwarding strategies based on business priorities and link-performance requirements.
Option C is correct because application categories can be used to identify traffic belonging to defined application groups. This capability enables administrators to steer business-critical applications through preferred WAN paths while directing less-sensitive traffic through alternative links.
Application-aware SD-WAN rules can use FortiGuard application identification to make forwarding decisions without relying exclusively on destination IP addresses or transport ports.
Option D is correct because the Internet Service Database provides predefined classifications for cloud services and internet applications. FortiGate can use ISDB objects in SD-WAN service rules to steer traffic toward destinations associated with services such as Microsoft 365 and other cloud applications.
Option A is incorrect because physical interface type is not one of the application or destination matching criteria represented by this question. SD-WAN members identify eligible forwarding interfaces, which is distinct from the traffic-classification criteria.
Option B is incorrect because BGP attributes influence routing decisions and route selection but are not directly equivalent to the application and ISDB matching criteria used by these service rules.
Together, application-category and ISDB matching provide granular, application-aware steering.
References: FortiOS 7.6 Administration Guide - Internet Service and Application Control Steering; FortiManager - Application Categories in SD-WAN Rules.
NEW QUESTION # 117
......
Based on the research results of the examination questions over the years, the experts give more detailed explanations of the contents of the frequently examined contents and difficult-to-understand contents, and made appropriate simplifications for infrequently examined contents. NSE7_SSE_AR-26 test questions make it possible for students to focus on the important content which greatly shortens the students’ learning time. With NSE7_SSE_AR-26 Exam Torrent, you will no longer learn blindly but in a targeted way. With NSE7_SSE_AR-26 exam guide, you only need to spend 20-30 hours to study and you can successfully pass the exam. You will no longer worry about your exam because of bad study materials. If you decide to choose and practice our NSE7_SSE_AR-26 test questions, our life will be even more exciting.
Free NSE7_SSE_AR-26 Exam Dumps: https://www.exam4docs.com/NSE7_SSE_AR-26-study-questions.html