We can tell you with confidence that the NSE6_EDR_AD-7.0 practice materials are superior in all respects to similar products. First, users can have a free trial of NSE6_EDR_AD-7.0 test prep, to help users better understand the NSE6_EDR_AD-7.0 study guide. If the user discovers that the product is not appropriate for him, the user can choose another type of learning material. Respect the user's choice, will not impose the user must purchase the NSE6_EDR_AD-7.0 practice materials. We can meet all the requirements of the user as much as possible, to help users better pass the qualifying NSE6_EDR_AD-7.0 exam.
| Section | Objectives |
|---|---|
| Topic 1: System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
| Topic 2: Forensics and Investigation | - Endpoint investigation workflows - Event analysis and telemetry review |
| Topic 3: Installation and Deployment | - Server and console installation requirements - Agent deployment and onboarding |
| Topic 4: Threat Detection and Response | - Automated response actions and remediation - Incident detection and alert handling |
| Topic 5: FortiEDR Architecture and Components | - System architecture and deployment models - FortiEDR components overview (agents, management console, collectors) |
| Topic 6: Policy Configuration and Management | - Prevention and detection policies - Policy tuning and exclusions |
>> Valid NSE6_EDR_AD-7.0 Test Simulator <<
Even though we have already passed many large and small examinations, we are still unconsciously nervous when we face examination papers. NSE6_EDR_AD-7.0 practice quiz provide you with the most realistic test environment, so that you can adapt in advance so that you can easily deal with formal exams. What we say is true, apart from the examination environment, also includes NSE6_EDR_AD-7.0 Exam Questions which will come up exactly in the real exam. And our NSE6_EDR_AD-7.0 study materials always contain the latest exam Q&A.
NEW QUESTION # 36
Which two criteria are required for integrating FortiEDR with the Fortinet Security Fabric? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and C .
For Fortinet Security Fabric correlation through FortiAnalyzer or FortiAnalyzer Cloud, the FortiEDR guide states that FortiEDR can integrate with FortiAnalyzer/FortiAnalyzer Cloud "to correlate data between FortiEDR and the Fortinet Security Fabric and issue eXtended detection alerts." To complete this, you must configure an eXtended Detection Source connector and enable eXtended Detection rules and FortiEDR Threat Hunting event collection.
The prerequisites include connectivity from the FortiEDR Central Manager to Fortinet Cloud Services (FCS) . The same prerequisite list also requires either a FortiAnalyzer administrator account with JSON API access enabled or, for FortiAnalyzer Cloud, a valid FortiCloud API user with read/write access to the FortiAnalyzer Cloud portal.
Option B is wrong because a Forensics add-on license is not listed as a requirement for this integration.
Option D is badly worded and not correct. A Jumpbox with connectivity to FortiAnalyzer is required, and the guide points to FortiEDR Core setup for Jumpbox configuration, but the answer option says Core with core- only functionality , which is not the stated requirement.
=========
NEW QUESTION # 37
Refer to the exhibits.
What happens when the net user command runs on an endpoint? (Choose one answer)
Answer: D
Explanation:
The correct answer is C .
The exhibit shows a Threat Hunting saved query named CLI Command with the query:
Target.Process.Filename ( " net.exe " )
It is configured as a Scheduled Query , classified as Suspicious , and set to repeat every 15 minutes . The FortiEDR guide states that saving a Threat Hunting query allows it to be defined as a scheduled query to automate threat detection. When the scheduled query runs and detects matching activity, a security event is automatically created in the Incidents tab .
The guide also states that scheduled queries run automatically according to the configured schedule, and each time a match is detected, FortiEDR generates a security event in the Incidents tab and sends notifications according to the security event configuration.
So, when the endpoint runs:
net user edruser password! /ADD
FortiEDR records the relevant process activity, and when the scheduled query runs, it matches the target process net.exe and creates an incident/security event. It is not immediate by default because the query is scheduled every 15 minutes. It also does not block CLI commands by default unless playbook actions or policy controls are configured. The activity is treated according to the saved query classification, which in the exhibit is Suspicious .
=========
NEW QUESTION # 38
An employee leaves the company and no longer has access to the FortiEDR system. You must ensure GDPR compliance regarding the employee's personal data stored in FortiEDR. Which two data types must be removed to meet GDPR requirements? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A. Device and user name and D. IP address and MAC address .
The FortiEDR 7.0.0 Administration Guide states that the GDPR feature is implemented in Administration > Settings > Personal Data Handling . It is used to remove relevant data for an employee or FortiEDR user who no longer has access to or uses the FortiEDR system. The guide explicitly identifies the personal data as device name, IP address, MAC address, and user name . It further states: "You must remove all device name, IP address, MAC address, and user name data from FortiEDR in order to fully comply with the GDPR standard." Therefore, installed applications and installed OS name are not the required GDPR personal data types in this FortiEDR procedure. The required removal is performed iteratively for the employee's/user's device name , IP address , MAC address , and user name . The guide also instructs administrators to continue removing the other required data: IP address, MAC address, and user name , and to delete any reports that may contain the user's data.
NEW QUESTION # 39
Refer to the exhibit.
An event exception is shown. Which two statements about the exception are true? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are C and D .
The exhibit shows an exception created/updated by FortinetCloudServices after the file Update.exe was classified as Good . This aligns with the FortiEDR Cloud Service behavior described in the guide. The guide states that once FCS is connected, it can enable Tuning , which means automated security event exception
/allowlisting. After a triggered security event is reclassified as Safe, an automated cross-environment exception can be pushed downstream and the event expires, preventing it from triggering again.
Option C is correct because the Event Exceptions window includes Triggered Rules , and the guide states that when editing an exception, the administrator can modify the Collector Groups , Destinations , Users , and the pairs of rules and processes that define the exception in the Triggered Rules area.
Option D is the Fortinet/FCS-related statement supported by the guide's FCS behavior. The guide says FCS can enable follow-up actions, including Tuning through automated exceptions and Playbook Actions , and that playbook policy remediation actions are based on the final FCS determination.
Option A is wrong because the exhibit explicitly states "All the Raw Data Items are covered." A partial exception would mean not all raw data items are covered. The guide explains that if an exception does not cover all raw data items, FortiEDR displays a different indicator and distinguishes covered from non-covered raw data items.
Option B is wrong because the exception scope in the exhibit is set to All groups , All destinations , and All users . The comment references device C8092231196, but that is not the same as saying the exception applies only to that device.
=========
NEW QUESTION # 40
Refer to the Exhibit:
A FortiEDR analyst is prioritizing response efforts. One application has a vulnerability score of Critical but an Unknown ACI rating, while another has a Medium vulnerability score with active ACI evidence of adversary targeting. Which application must be addressed first? (Choose one answer)
Answer: B
Explanation:
The correct answer is D .
The FortiEDR 7.0.0 Administration Guide explains that FortiEDR displays two severity ratings for applications: NIST Severity and ACI Severity . NIST Severity is based on FortiEDR's vulnerability scoring system using the NIST Cybersecurity Framework. ACI Severity, however, is Adversary Centric Intelligence provided by FortiRecon and FortiGuard Threat Analysts, covering dark web, open-source, and technical threat intelligence, including threat actor insights . This helps administrators proactively assess risk, respond faster to incidents, understand attackers, and protect assets.
The guide also states that FortiEDR helps analysts prioritize alerts and incidents using risk factors such as severity of vulnerabilities , relevance of threat intelligence feeds , and severity of affected endpoints , so effort is focused on the most significant organizational risks.
Therefore, the application with Medium NIST severity but active ACI evidence of adversary targeting should be prioritized over an application with Critical NIST severity but Unknown ACI rating , because active adversary-centric intelligence indicates current attacker interest or exploitation relevance. In plain terms: a theoretical critical vulnerability matters, but an actively targeted vulnerability is the fire you put out first.
Option B is tempting but incomplete because it relies only on NIST/CVSS severity. FortiEDR's ACI rating exists specifically to add adversary context to prioritization. Option A is wrong because FortiEDR does not treat all vulnerable applications equally. Option C is wrong because asset criticality can matter, but the guide does not say prioritization depends only on asset criticality.
=========
NEW QUESTION # 41
......
If you want to clear the Central Finance in Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) test, then you need to study well with real Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) exam dumps of TestKingIT. These Fortinet NSE6_EDR_AD-7.0 exam dumps are trusted and updated. We guarantee that you can easily crack the Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) test if use our actual Central Finance in Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) dumps.
Valid NSE6_EDR_AD-7.0 Mock Test: https://www.testkingit.com/Fortinet/latest-NSE6_EDR_AD-7.0-exam-dumps.html