2026 Latest Fast2test SD-WAN-Engineer PDF Dumps and SD-WAN-Engineer Exam Engine Free Share: https://drive.google.com/open?id=1RBoaMVO5OS6cNCb5VBLI_ZWJRUV2LGse
Don't mind what others say, trust you and make a right choice. We hope that you understand our honesty and cares, so we provide free demo of SD-WAN-Engineer exam software for you to download before you purchase our dump so that you are rest assured of our dumps. After your payment of our dumps, we will provide more considerate after-sales service to you. Once the update of SD-WAN-Engineer Exam Dump releases, we will inform you the first time. You will share the free update service of SD-WAN-Engineer exam software for one year after you purchased it.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Deployment and Configuration | 26% | - Template configuration and site-specific settings - Routing protocols and segmentation (VRF) - Integration with Prisma Access and security services - Initial setup and onboarding of Prisma SD-WAN devices |
| Topic 2: Planning and Design | 24% | - Policy design for routing, QoS, NAT, and path selection - Architecture and requirements analysis - Network design, high availability, and security requirements - Device selection and licensing planning |
| Topic 3: Operations and Monitoring | 20% | - Configuration management and upgrades - Analytics and reporting for optimization - WAN Clarity reports and performance visibility - Monitoring tools, alerts, and event management |
| Topic 4: Troubleshooting | 20% | - Path selection and security troubleshooting - Connectivity and routing issue resolution - Using Co-pilot and logs for diagnostics - Application performance and policy validation |
| Topic 5: Unified SASE Integration | 10% | - Prisma SD-WAN + Prisma Access integration - Identity and IoT integration - ADEM configuration and monitoring |
>> SD-WAN-Engineer Dumps Guide <<
Our Palo Alto Networks Exam Questions greatly help Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam candidates in their preparation. Our SD-WAN-Engineer practice questions are designed and verified by prominent and qualified Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam dumps preparation experts. The qualified Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam questions preparation experts strive hard and put all their expertise to ensure the top standard and relevancy of SD-WAN-Engineer exam dumps topics.
NEW QUESTION # 68
A network installer is at a remote branch site to deploy a new ION 3000 device. The device has been racked, cabled to the internet, and powered on. The installer has the "Claim Code" displayed on the email sent by the administrator.
When the administrator enters this Claim Code into the Prisma SD-WAN portal, what is the immediate status of the device before the configuration is fully pushed?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
In the Prisma SD-WAN (CloudGenix) Zero Touch Provisioning (ZTP) lifecycle, the device status transitions through specific stages that indicate its readiness and connectivity.
When an administrator enters the Claim Code (or Serial Number/Claim Code pair) into the portal, the device status immediately updates to "Claimed".
This status confirms that the portal has registered the device's unique identity and associated it with the customer's tenant. However, "Claimed" does not necessarily mean the device is fully operational or passing traffic yet. It simply signifies that the ownership is verified.
Once the physical device at the site successfully connects to the internet and reaches the Prisma SD-WAN Controller (using the call-home function), it will authenticate using its installed certificate. Upon successful authentication and the establishment of the secure control channel, the status will transition from "Claimed" to "Online".
Only after the device is "Online" can the controller push the specific site configuration (Device Shell), policies, and IP addressing required for the device to become "Provisioned" and eventually "Active" in the data path. If the device remains in the "Claimed" state for an extended period, it indicates that the hardware has not yet successfully contacted the controller, which prompts troubleshooting of the physical internet circuit or firewall rules upstream.
NEW QUESTION # 69
What are two potential causes when a secondary public circuit has been added to the branch site, but the Prisma SD-WAN tunnel is not forming to the data center? (Choose two.)
Answer: B,C
Explanation:
In a Prisma SD-WAN deployment, the formation of VPN tunnels between a branch ION device and a Data Center (DC) ION is governed by specific configuration parameters that define how an interface interacts with the WAN fabric. When a secondary public circuit is introduced, the system requires precise classification to initiate the negotiation of security associations.
The first critical factor is the Interface Role. For an ION device to attempt to build a global fabric tunnel over a public circuit, the interface must be explicitly assigned the "Internet" role. If the role is incorrectly set (e.g., as "LAN" or left unconfigured), the device will not treat that physical port as a viable path for the SD- WAN overlay, preventing the tunnel from initiating.
Secondly, the Circuit Label plays a vital role in the path selection and tunnel orchestration logic. Prisma SD- WAN uses labels to match local branch circuits with corresponding circuits at the data center or other branches. If a circuit label is missing or mismatched on the interface configuration, the Controller cannot properly orchestrate the "bind" between the branch and the hub. Without a valid label, the ION device doesn't know which path group the circuit belongs to, and consequently, the automated tunnel signaling process fails to complete.
While DNS is important for management connectivity to the Controller, it is generally not the primary blocker for site-to-site tunnel formation if the Controller reachability is already established via the primary circuit.
Similarly, "Interface Scope" is more relevant to routing advertisement rather than the foundational establishment of the SD-WAN tunnel itself. Therefore, ensuring the Internet role and Circuit Label are correctly applied is the standard troubleshooting step for non-forming tunnels on new circuits.
NEW QUESTION # 70
Based on the HA topology image below, which two statements describe the end-state when power is removed from the ION 1200-S labeled "Active", assuming that the ION labeled "Standby" becomes the active ION?
(Choose two.)
Answer: C,D
Explanation:
Prisma SD-WAN High Availability (HA) for branch ION devices, particularly the Gen-2 ION 1200-S, is designed to provide "100% WAN Capacity" preservation during a hardware or power failure. This is achieved through the use of Bypass Pairs (Fail-to-Wire). In the provided topology, the ISP A and LTE/5G circuits are cross-connected using the bypass ports (typically ports 3 and 4 on the ION 1200-S).
When the "Active" ION device loses power, the internal physical relays in its bypass ports transition to a closed state, effectively creating a physical bridge between the ports. In this scenario, the LTE/5G signal- which enters the Active ION's port 4-is mechanically bridged to port 3, allowing it to pass through to port 4 of the Standby ION. Simultaneously, ISP A is already connected to the Standby ION. Consequently, once the Standby device completes its transition to the "Active" state, it has physical access to both WAN circuits, validating Statement A.
Regarding the LAN transition, Prisma SD-WAN does not use standard VRRP for ION-to-ION HA; instead, it uses a proprietary Control Plane HA mechanism. When the failover occurs, the newly active ION takes over the IP addresses of all configured Switch Virtual Interfaces (SVIs) and LAN interfaces. To ensure the downstream Layer 2 infrastructure (like the LAN switches shown in the diagram) updates its MAC address tables to point to the new physical hardware for those IPs, the newly active ION immediately broadcasts a Gratuitous ARP (GARP). This ensures that LAN traffic is correctly steered to the new device without a significant timeout, validating Statement C.
NEW QUESTION # 71
Which component of the Prisma SD-WAN solution is responsible for the deep application identification (App- ID) and the generation of flow metrics (Network Transfer Time, Server Response Time) at the branch?
Answer: C
Explanation:
Comprehensive and Detailed Explanation
The ION Device Data Plane (the software running locally on the hardware appliance at the branch) is the component responsible for the heavy lifting of traffic analysis.
* Edge Processing: Prisma SD-WAN uses an "Application-Defined" architecture. The ION device performs Deep Packet Inspection (DPI) on the first few packets of a flow to identify the application (e.
g., distinguishing "Skype Video" from "Skype Chat").
* Metric Calculation: The ION device timestamping engine calculates the performance metrics (RTT, NTT, SRT) in real-time as packets pass through its interfaces. It aggregates this metadata.
* Role of Controller (B): The Controller collects and visualizes this data (Analytics), but it does not generate it. The Controller does not sit in the data path of the user traffic. If the ION relied on the controller for App-ID, latency would be unacceptably high. Therefore, all detection and metric generation happens locally on the ION Device.
NEW QUESTION # 72
A customer wants to deploy Prisma SD-WAN ION devices at small home offices that use consumer-grade broadband routers. These routers typically use Symmetric NAT and do not allow static port forwarding.
Which standard mechanism does Prisma SD-WAN utilize to successfully establish direct Branch-to-Branch (Dynamic) VPN tunnels through these Symmetric NAT devices?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN utilizes STUN (Session Traversal Utilities for NAT) to facilitate NAT Traversal for its Secure Fabric overlay.
* Discovery: When an ION device connects to the internet behind a NAT router, it reaches out to the Prisma SD-WAN Controller. The controller acts as a STUN server, identifying the public IP address and port that the ION's traffic is originating from.
* Symmetric NAT Challenge: In Symmetric NAT, the mapping changes for every destination.
However, the Prisma SD-WAN architecture is designed to handle this by having the controller coordinate the connection attempt.
* Hole Punching: The controller shares the discovered public mapping information between two peer ION devices. They then simultaneously initiate traffic to each other's public IP/Port (a technique called
"UDP Hole Punching"). This tricks the intermediate NAT devices into allowing the inbound traffic, establishing a direct P2P IPSec tunnel without requiring manual port forwarding or static IPs at the edge.
NEW QUESTION # 73
......
The real and updated Fast2test Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam dumps file, desktop practice test software, and web-based practice test software are ready for download. Take the best decision of your professional career and enroll in the Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) certification exam and download Fast2test Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam questions and starts preparing today.
Valid SD-WAN-Engineer Exam Dumps: https://www.fast2test.com/SD-WAN-Engineer-premium-file.html
P.S. Free & New SD-WAN-Engineer dumps are available on Google Drive shared by Fast2test: https://drive.google.com/open?id=1RBoaMVO5OS6cNCb5VBLI_ZWJRUV2LGse