Our system is high effective and competent. After the clients pay successfully for the H19-404_V1.0 certification material the system will send the products to the clients by the mails. The clients click on the links in the mails and then they can use the H19-404_V1.0 prep guide materials immediately. It takes only a few minutes for you to make the successful payment for our H19-404_V1.0 learning file. Our system will automatically send the updates of the H19-404_V1.0 learning file to the clients as soon as the updates are available. So our system is wonderful.
| Section | Objectives |
|---|---|
| Campus SD-WAN Planning and Design | - SD-WAN Solutions
|
| Campus Network Solution Architecture and Design | - Enterprise Campus Network Architecture
|
| Industry Scenario Solution Design | - Industry-Oriented Campus Solutions
|
| Huawei Campus Network Products and Solutions | - Campus Network Product Portfolio
|
| Campus WLAN Planning and Design | - WLAN Technologies
|
| Pre-sales Methodology and Solution Presentation | - Pre-sales Skills
|
| Campus Network Security Design | - Security Planning
|
| CloudCampus and Intelligent Campus Solutions | - CloudCampus Architecture
|
>> Latest H19-404_V1.0 Exam Online <<
Take advantage of this golden opportunity, and download our HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) updated exam questions to grab the most prestigious credential in one go. TorrentExam has formulated the HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) exam dumps in these three user-friendly formats: HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) Web-Based Practice Test, Desktop Practice Exam Software, and H19-404_V1.0 questions PDF file. You will find the specifications of these formats below to understand them properly.
NEW QUESTION # 23
Which of the following BGP NLRI address-family combinations is used to transmit SD-WAN tunnel encapsulation information?
Answer: C
Explanation:
AFI 1 with SAFI 74 is the correct combination. In Multiprotocol BGP, the Address Family Identifier defines the basic network-layer address family, while the Subsequent Address Family Identifier specifies how the associated NLRI is interpreted. AFI 1 represents IPv4. SAFI 74 is assigned for SD-WAN capabilities and is used to distribute information required for SD-WAN edge discovery and tunnel establishment, including transport and encapsulation-related attributes.
The other combinations represent different forms of reachability information. AFI 1/SAFI 1 is ordinary IPv4 unicast NLRI. AFI 1/SAFI 2 represents IPv4 multicast reachability. AFI 25 represents Layer 2 VPN information, while SAFI 70 represents Ethernet VPN routes; that combination is associated with EVPN rather than the specific SD-WAN capability NLRI requested.
Huawei's architecture uses BGP-based control channels to exchange transport network port information, IPsec security-association information, and service routes. These parameters allow edge devices to determine peer endpoints and create GRE or GRE-over-IPsec data channels after the relevant service routes trigger tunnel establishment.
NEW QUESTION # 24
What are the modes of the HSR RedBox?
Answer: A,B,C,D
Explanation:
An industrial RedBox can provide all four listed interconnection modes. In HSR-SAN mode, it connects a singly attached node that does not natively support High-availability Seamless Redundancy to an HSR network. The RedBox duplicates frames entering the HSR domain and removes duplicate frames before delivering traffic to the SAN.
HSR-PRP mode interconnects an HSR ring with a Parallel Redundancy Protocol network while preserving seamless redundancy. PRP-PRP mode couples two PRP network domains, while HSR-HSR mode connects separate HSR rings. Depending on the implementation, the HSR-HSR interconnection function may also be described as a QuadBox function because four HSR-facing ports can be involved.
The essential RedBox responsibilities are frame conversion, duplication, duplicate elimination, sequence- number handling, and prevention of unintended forwarding loops between redundancy domains. HSR and PRP use compatible duplicate-identification principles, enabling controlled interconnection between these network types without introducing a single point of failure. RedBoxes also provide redundant connectivity for devices that have only one ordinary Ethernet interface.
NEW QUESTION # 25
Which of the following encryption algorithms is used by WPA3?
Answer: A
Explanation:
The intended answer is AES-256. In certification material, this question normally refers to the enhanced WPA3-Enterprise 192-bit security suite, which uses the GCMP-256 data-protection algorithm based on AES-
256, together with stronger integrity and key-management components. AES-512 is not a standardized AES variant, and RC4 is the obsolete stream cipher associated with legacy WEP and TKIP-era protection rather than WPA3.
There is an important technical qualification: WPA3 is a family of certification modes, not one universal cipher suite. WPA3-Personal commonly uses Simultaneous Authentication of Equals for password- authenticated key establishment and requires CCMP-128, which is based on AES-128. WPA3-Enterprise 192- bit mode, however, uses AES-256 in GCM mode. Therefore, the original wording is broader than it should be.
A technically precise version would ask which algorithm is associated with the WPA3-Enterprise 192-bit security suite. Under the intended Huawei examination scope and the supplied single-choice options, option B is correct. That distinction is crucial when interpreting this simplified examination item.
NEW QUESTION # 26
Which of the following functions is supported by the AR6177?
Answer: D
Explanation:
The distinguishing function supported by the AR6177 is VDSL. VDSL, or Very-high-bit-rate Digital Subscriber Line, enables a branch router to obtain WAN connectivity over existing copper telephone infrastructure. It is appropriate for small branches and distributed sites where Ethernet private lines, fiber, or mobile connections are unavailable or commercially impractical.
The AR6177 can terminate the VDSL access circuit and provide routing, NAT, DHCP, VPN, and other branch-gateway functions for the connected LAN. In this single-answer question, Wi-Fi and PoE are not the defining integrated capabilities of the AR6177 model. Similarly, the complete combination of IPS, antivirus, and URL filtering belongs to a security-enhanced product profile rather than the function used to distinguish the AR6177.
Huawei's campus design material recognizes DSL links as a specific WAN-access category and notes that deployments involving complex or low-speed links, including DSL, may require an appropriate branch-device deployment method. The model is therefore selected when direct VDSL-based WAN access is required.
Consequently, VDSL is the supported capability intended by this question, and option C is correct.
NEW QUESTION # 27
On a campus fabric network, which of the following methods can be used for non-authenticated terminals to access a VN?
Answer: A
Explanation:
Non-authenticated terminals can access a virtual network by using statically configured VLANs. Such terminals may include printers, cameras, sensors, industrial devices, and other dumb terminals that cannot perform 802.1X, Portal, or comparable interactive authentication. Their access interfaces and service VLANs are therefore configured in advance and mapped to the required VN.
Dynamic VLAN authorization requires a completed authentication or identification process. Normally, an authentication server returns a VLAN or other authorization attribute after validating the user or terminal.
Because the question specifically refers to non-authenticated terminals, dynamically authorizing a VLAN is not the applicable mechanism. The wired-mode and wireless-mode authorization options are likewise associated with authentication-based policy delivery rather than unconditional VN access.
Huawei's VN design guidance states that LAN-side physical interfaces and VLANs are assigned to the appropriate departments or services and then associated with corresponding VRFs or VNs. It also explains that a department may use an independent physical interface or share an interface while maintaining isolation through VLANs. Therefore, configuring a static VLAN is the correct method.
NEW QUESTION # 28
......
As far as the price of Huawei H19-404_V1.0 exam practice test questions is concerned, these exam practice test questions are being offered at a discounted price. Get benefits from H19-404_V1.0 Exam Questions at discounted prices and download them quickly. Best of luck in H19-404_V1.0 exam and career!!!
H19-404_V1.0 Trustworthy Exam Torrent: https://www.torrentexam.com/H19-404_V1.0-exam-latest-torrent.html