P.S. Free & New HPE7-A01 dumps are available on Google Drive shared by ExamcollectionPass: https://drive.google.com/open?id=18Y0JqsASuA8gtQLdWFDGhhBFgtdvXyVX
ExamcollectionPass provide all candidates with HPE7-A01 test torrent that is compiled by experts who have good knowledge of HPE7-A01 exam, and they are very professional in compile HPE7-A01 study materials. Not only that, our team checks the update every day, in order to keep the latest information of HPE7-A01 our test torrent. Once we have latest version, we will send it to your mailbox as soon as possible. It must be best platform to provide you with best HPE7-A01 study material for your exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Security | 9% | - Network security standards and policies - Secure access control and segmentation - Guest access and threat mitigation |
| Topic 2: Connectivity | 8% | - Network device deployment - Network architectures and technologies |
| Topic 3: Network Resiliency and Virtualization | 8% | - VSX, VSF, VRF, VxLAN technologies - Redundancy and fault tolerance mechanisms |
| Topic 4: Switching | 14% | - High availability at access layer - Layer 2 / Layer 3 switching implementation - VLAN design, trunking, spanning tree |
| Topic 5: WLAN | 17% | - RF fundamentals and optimization - WLAN architecture and AP deployment - WLAN security and connectivity modes |
| Topic 6: Management and Monitoring | 6% | - Monitoring tools: SNMP, Syslog, NetFlow - Aruba Central management and monitoring - Automation and API usage |
| Topic 7: Network Stack | 4% | - 802.11, 802.1, and 802.3 technologies |
| Topic 8: Performance Optimization | 7% | - Network performance tuning - QoS implementation and traffic management |
| Topic 9: Routing | 13% | - OSPF, policy-based routing implementation - Routing topologies and protocols |
| Topic 10: Authentication and Authorization | 8% | - AAA concepts and implementation - 802.1X, MAC authentication, ClearPass integration |
| Topic 11: Troubleshooting | 6% | - Fault isolation and troubleshooting methodologies - Performance and connectivity issue resolution |
>> Latest HP HPE7-A01 Test Guide <<
You don't have to install excessive plugins or software to attempt this HP HPE7-A01 practice test. This version of HPE7-A01 practice exam is supported by these operating systems: Windows, Mac, iOS, Linux, and Android. It is a customizable HP HPE7-A01 Practice Exam. It means takers can change its duration and HPE7-A01 practice test question numbers. The actual HP HPE7-A01 exam environment that the practice exam creates is beneficial to counter Aruba Certified Campus Access Professional Exam (HPE7-A01) exam anxiety.
NEW QUESTION # 171
A company is in the planning stages to migrate to all their wireless domain laptops from WPA2 from WPA2 EAP-PEAP to EAP-TLS with machine Authentication. The administrator is testing a new Group Policy (GPO) that was pushed to only a few windows domain Laptops. The policy will configure the wireless profile to perform machine and certificate-based authentication.
To support this new initiative the administrator also configured a new HPE Aruba Networking ClearPass 802.1X wireless service that only allows devices that successfully perform machine and certificate-based authentication. After successfully pushing the GPO, the Windows laptops are unable to join the configured `'secure_wireless'' SSID as shown below.
Which configuration setting would resolve this issue?
Answer: C
Explanation:
This The chosen configuration matches the ClearPass policy requiring certificate-based machine authentication and will allow the laptop to join the "secure_wireless" SSID.
NEW QUESTION # 172
Review the exhibit. You are troubleshooting an issue with a 10.102.39.0/24 subnet, which is also VLAN 1000 used for wireless clients on a pair of CX 8360 switches. The subnet SVI is configured on the CX 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10.200.1.100. The 10.102.250.0/24 subnet is used for switch management.
A large number of DHCP requests are failing. You are observing sporadic DHCP behavior across clients attached to the CX 6100 switch.
Which action may help fix the issue?
Answer: D
Explanation:
Option C is the only action that configures the DHCP relay on the SVI of VLAN 1000 on the CX
8360 switches. DHCP relay is a feature that allows a switch to forward DHCP requests from clients in one subnet to a DHCP server in another subnet. DHCP relay is required when the DHCP server and the clients are not in the same broadcast domain.
Option C uses the following commands:
interface vlan 1000: This command enters the interface configuration mode for the SVI of VLAN
1000, which has an IP address of 10.102.39.1/24 and is used for wireless clients. ip helper- address vrf default 10.200.1.100: This command configures the IP address of the DHCP server as a helper address for the SVI, which means that the switch will forward DHCP requests from clients on VLAN 1000 to this address. The vrf default parameter indicates that the SVI and the DHCP server are in the same VRF.
NEW QUESTION # 173
Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where servers attach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10.
The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the VSX switches.
What is correct about access from the servers to the Core? (Select two.)
Answer: C,F
Explanation:
These are the correct statements about access from the servers to the Core when the ISL link between the switches fails, but the keepalive interface functions. Server 1 can access the core layer via both uplinks because it is connected to VSX-A, which is still active for VLAN 10. Server 2 can also access the core layer via its uplink to VSX-B, which is still active for VLAN 10 because of Active Gateway feature.
Server 1 and Server 2 can communicate with each other via the core layer because they are in the same VLAN and subnet, and their traffic can be routed through the core switches. The other statements are incorrect because they either describe scenarios that are not possible or not relevant to the question.
References: https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-
NEW QUESTION # 174
Select the Aruba stacking technology matching each option (Options may be used more than once or not at all.)
Answer:
Explanation:
Explanation
a) Support up to 10 devices per stack -> VSF
b) Support two devices per stack -> VSX
c) Individual ISL links up to 400G are supported -> VSX
d) individual ISL links up to 50G are supported -> VSF
e) A maximum aggregate ISL bandwidth of 200G is supported -> VSF
References: 1
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/GUID-2E425DAE-EC54-4313-9D
NEW QUESTION # 175
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?
Answer: B
Explanation:
Explanation
The show arp command displays the ARP table for a specific VRF or all VRFs on the switch. The ARP table contains the IP address to MAC address mappings for hosts that are directly connected to the switch or reachable through a gateway. If the client device is connected to another switch by VSX LAG, the ARP entry for the client device will not be present on the primary switch unless it has communicated with it recently.
Therefore, to find the IP address of the client device, the administrator should run the show arp command on the secondary switch in the VSX pair, specifying the VRF name that contains the client device's subnet.
References:
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-9B8F6E8F-9C7A-4F0D-AE7B-9D8E
NEW QUESTION # 176
......
The web-based HP HPE7-A01 mock test is compatible with mamy systems. This version of the HP HPE7-A01 practice exam requires an active internet connection. It does not require any additional plugins or software installation to operate. Furthermore, others also support the HPE7-A01 web-based practice exam. Features of the HPE7-A01 desktop practice exam software are web-based as well.
HPE7-A01 Reliable Real Exam: https://www.examcollectionpass.com/HP/HPE7-A01-practice-exam-dumps.html
What's more, part of that ExamcollectionPass HPE7-A01 dumps now are free: https://drive.google.com/open?id=18Y0JqsASuA8gtQLdWFDGhhBFgtdvXyVX