In order to meet different needs for candidates, we offer you three versions for AZ-802 exam cram, and you can choose the one you like. AZ-802 PDF version is printable, and you can print them into hard one if you like, you can learn them anywhere and anyplace. AZ-802 Soft test engine can stimulate the real exam environment, so that you can know the process of the exam, and your confidence will be strengthened. AZ-802 Online Test engine support Android and iOS etc. You can have a general review since this version has testing history and performance review. All three versions have free update for one year, and the update version will be sent to you automatically.
| Section | Objectives |
|---|---|
| Topic 1: Implement and manage high availability | - Load balancing and redundancy
|
| Topic 2: Disaster recovery and migration | - Migration scenarios
|
| Topic 3: Monitoring and troubleshooting | - Diagnostics
|
| Topic 4: Secure Windows Server hybrid infrastructures | - Identity and access management
|
| Topic 5: Manage hybrid compute and virtualization | - Containers
|
| Topic 6: Networking and storage infrastructure | - Storage management
|
In the era of rapid changes in the knowledge economy, do you worry that you will be left behind? Let's start by passing the AZ-802 exam. Getting a AZ-802 certificate is something that many people dream about and it will also bring you extra knowledge and economic benefits. The AZ-802 latest question we provide all candidates that that is compiled by experts who have good knowledge of exam, and they are very experience in compile study materials. Not only that, our team checks the update every day, in order to keep the latest information of AZ-802 Exam Question.
NEW QUESTION # 334
You have a disaggregated cluster deployment. The deployment contains a scale-out file server (SOFS) cluster that runs Windows Server and a compute cluster that has the Hyper-V role enabled. You need to implement Storage Quality of Service (QoS). The solution must ensure that you can control the bandwidth usage between the SOFS cluster and the Hyper-V cluster. Which cmdlet should you run on each cluster? To answer, drag the appropriate cmdlets to the correct clusters. Each cmdlet may be used once, more than once, or not at all.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
SOFS: New-StorageQosPolicy; Hyper-V: Set-VMHardDiskDrive
In a disaggregated deployment, storage (the Scale-Out File Server cluster) and compute (the Hyper-V cluster) are separate clusters, and centralized Storage QoS is the supported mechanism for governing and capping the bandwidth/IOPS that VM virtual hard disks consume against that shared SOFS storage. The centralized Storage QoS policy itself -- defining minimum and/or maximum IOPS or throughput limits -- is created on the SOFS cluster using New-StorageQosPolicy; because policies are stored on the file server cluster, they can be referenced by any VM accessing CSV shares exposed by that SOFS, regardless of which Hyper-V host in the compute cluster the VM happens to run on. To actually apply a given policy to a specific VM ' s virtual hard disk, you run Set-VMHardDiskDrive on the Hyper-V cluster side, specifying the QoS policy (by - QoSPolicyID or -QoSPolicyName) on the VM ' s virtual disk attachment; the disk ' s I/O is then governed by that policy ' s bandwidth constraints regardless of Hyper-V host placement within the compute cluster. Set- VMSan is unrelated to Storage QoS; it configures Hyper-V Virtual SAN/Fibre Channel connectivity for guest clustering scenarios and plays no role in bandwidth governance between SOFS and Hyper-V clusters.
Therefore, the correct pairing is New-StorageQosPolicy on the SOFS cluster (to define the policy) and Set- VMHardDiskDrive on the Hyper-V cluster (to apply it to VM disks).
NEW QUESTION # 335
Which three actions should you perform in sequence to meet the security requirements for Webapp1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Create the KDS root key in AD DS. 2. Create a group managed service account (gMSA) in Active Directory. 3. Configure the IIS application pool (on WEB1 and WEB2) to run as the gMSA via a specified user account.
The requirement is that every instance of Webapp1 (running on both WEB1 and WEB2) uses the same identity, and that identity ' s password rotates automatically every 30 days, without any administrator manually resetting it. A standalone managed service account (sMSA) is tied to a single computer and cannot be shared across WEB1 and WEB2, so it does not meet the requirement. A group managed service account (gMSA) is designed exactly for this scenario: one AD-managed identity that multiple servers can use simultaneously, with the Key Distribution Service automatically rotating its password (by default every 30 days) without needing manual intervention or downtime. Before any gMSA can be created in the forest, a one- time prerequisite must exist: the KDS root key, which the Key Distribution Service uses to generate and later recompute the gMSA ' s password material. So the correct order is to first create the KDS root key, then create the gMSA object in Active Directory, and finally configure the IIS application pool on each web server to run as that gMSA using the " specified user account " identity option (entered as domain\gMSA$ with no password required, since the password is centrally managed). Creating a system- or user-assigned managed identity in Microsoft Entra ID does not apply here, since Webapp1 runs on IIS on domain-joined VMs, not as an Azure PaaS resource.
NEW QUESTION # 336
You have an Azure virtual machine named VM1 that runs Windows Server.
The operating system on VM1 fails to start due to a disk error.
You need to resolve the error.
Which four commands should you run in sequence in Azure Cloud Shell? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. az extension add. 2. az vm repair create. 3. az vm repair run. 4. az vm repair restore.
The Azure VM repair commands are delivered as the vm-repair Azure CLI extension rather than as a built-in part of the core CLI, so az extension add, which installs that extension, is always the required first step before any az vm repair subcommand can be invoked in Cloud Shell. Once the extension is installed, az vm repair create copies VM1 ' s operating system disk and attaches that copy to a new, temporary repair virtual machine so it can be examined and worked on without further risking the original VM. The optional az vm repair run step then executes a diagnostic or fix-up script against the disk that is now attached to the temporary repair VM, allowing an administrator to inspect or repair the file system, boot configuration, or other disk-level issue that is preventing VM1 from starting. Finally, az vm repair restore swaps the repaired disk back onto the original VM1 in place of its damaged disk and cleans up the temporary repair VM and its associated resources, completing the recovery process and allowing VM1 to start normally again with its repaired disk.
NEW QUESTION # 337
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a failover cluster named Cluster1 that hosts an application named App1. The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.) The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.) Server2 shuts down unexpectedly. You need to ensure that when you start Server2, App1 continues to run on Server2. Solution: You pause the Server1 node in Cluster1 and then start Server1. Does this meet the goal?
Answer: B
Explanation:
The General tab for App1 shows that its Preferred Owners list has no nodes selected at all, and the Failover tab shows Allow failback set to Immediately, but the Allow failback setting only has any practical effect once a most-preferred owner node has actually been defined in the Preferred Owners list; with that list empty, the cluster has no designated target node to fail the role back to, regardless of how the failback timing is configured. After Server2 ' s unexpected shutdown, App1 is presumably now running on Server1, since Server1 is the surviving node in this two-node scenario. Pausing the Server1 node, which is the node currently running App1, and then simply starting Server1 again does nothing to move App1 back onto Server2 once Server2 is restarted, because pausing a node only prevents new roles from being placed onto it while it is paused; it does not trigger any existing role to move away from that node, nor does it configure any preferred- owner relationship that would drive App1 back to Server2. To actually meet the stated goal, Server2 would need to be explicitly configured as the preferred owner for App1 so that automatic failback has a defined target once Server2 comes back online, and that configuration change is not what this solution performs.
NEW QUESTION # 338
You have an Azure subscription that contains a virtual network named VNet1. VNet1 contains three subnets named Subnet1, Subnet2, and Subnet3. You deploy a virtual machine named VM1 with network interface NIC1 in Subnet2, running Windows Server 2022. You need to ensure that VM1 can route traffic between Subnet1 and Subnet3. The solution must minimize administrative effort. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
For a virtual machine to act as a router relaying traffic between two other subnets, two independent forwarding checks must both be satisfied, one at the Azure network fabric layer and one inside the guest operating system. At the Azure layer, a network interface silently drops any packet that is not addressed to one of its own configured IP addresses unless IP forwarding is explicitly enabled on that NIC; enabling IP forwarding for NIC1 in the Azure portal is what allows Azure ' s network fabric to let VM1 relay traffic that is not destined for VM1 itself. That setting alone, however, only stops Azure from discarding the packets at the network level - it does not make Windows itself forward IPv4 packets between its network adapters. Inside the guest, Windows Server needs the Routing and Remote Access Service (RRAS) role installed and configured for LAN routing (IPv4 forwarding) to actually receive a packet on one interface and forward it out toward its destination on another subnet. Installing and configuring RRAS is the standard, minimal- administrative-effort way to turn a Windows Server VM into a functioning router for this scenario, compared with the alternative options: a Windows Server Network Controller is a heavyweight SDN management role unrelated to simple point-to-point routing, and a manually run route add command only affects VM1 ' s own outbound routing decisions rather than enabling it to forward other hosts ' traffic through itself.
NEW QUESTION # 339
......
The pass rate for AZ-802 training materials is 98.95%, and you can pass and get the certificate successfully if you buy AZ-802 training materials from us. Besides, we have experienced experts to compile and verify AZ-802 training materials, therefore quality and accuracy can be guaranteed. We are pass guarantee and money back guarantee if you buy AZ-802 Exam Dumps from us. We provide you with free update for one year for the AZ-802 training materials, so that you can know the latest information about the exam.
AZ-802 Exam Dumps Provider: https://www.actualtests4sure.com/AZ-802-test-questions.html