2026 Latest Itbraindumps H12-893_V1.0 PDF Dumps and H12-893_V1.0 Exam Engine Free Share: https://drive.google.com/open?id=1jkUJtzd1W7HURKa3v49YgW97NFO3Ww5H
Those who are ambitious to obtain HCIP-Data Center Network V1.0 certification mainly include office workers; they expect to reach a higher position and get handsome salary, moreover, a prosperous future. Through our H12-893_V1.0 test torrent, we expect to design such an efficient study plan to help you build a high efficient learning attitude for your further development. Our study materials are cater every candidate no matter you are a student or office worker, a green hand or a staff member of many years' experience, H12-893_V1.0 Certification Training is absolutely good choices for you. Therefore, you have no need to worry about whether you can pass the exam, because we guarantee you to succeed with our technology strength.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Data Center Network Planning and Deployment | 30% | - Security and management design - Network deployment and provisioning
|
| Topic 2: Virtualization Technology Principles and Applications | 20% | - Huawei FusionCompute platform
|
| Topic 3: VXLAN Technology Principles and Applications | 25% | - VXLAN fundamentals and evolution - EVPN control plane technology - VXLAN deployment and configuration |
| Topic 4: Data Center Network Operation and Maintenance | 25% | - Automated O&M and programmability - Intelligent O&M solutions
|
>> H12-893_V1.0 Certification Cost <<
To pass the H12-893_V1.0 exam is not an easy task. It is a challenging exam. However, proper planning and preparation with H12-893_V1.0 exam questions can enable you to pass the H12-893_V1.0 exam easily. As far as the Huawei H12-893_V1.0 Practice Test are concerned, these H12-893_V1.0 Practice Test questions are designed and verified by Huawei H12-893_V1.0 exam trainers. So you rest assured that with H12-893_V1.0 exam real questions you can pass HCIP-Data Center Network V1.0 H12-893_V1.0 exam easily.
NEW QUESTION # 66
Which of the following operations need to be performed before deployment in Easy mode?
(Select All that Apply)
Answer: A,C
Explanation:
The Easy mode in Huawei's iMaster NCE-Fabric simplifies VXLAN fabric deployment with automated configuration. Certain pre-deployment steps are required. Let's evaluate each option:
A). Disable data synchronization upon going online for the first time: This is false. Data synchronization is typically enabled by default to ensure consistency; disabling it is not a standard pre-deployment step and is optional based on specific needs. FALSE.
B). Load the license: This is true. A valid license must be loaded into iMaster NCE-Fabric before deployment to unlock features, including Easy mode functionality. TRUE.
C). Pre-configure the access ports: This is true. Access ports on devices (e.g., server leaf nodes) need to be pre-configured (e.g., with VLANs or basic settings) to ensure connectivity before Easy mode automation begins. TRUE.
D). Configure an SSH fingerprint verification policy: This is false. SSH fingerprint verification is part of security configuration but is not a mandatory pre-deployment step for Easy mode; it can be set post- deployment or is automated. FALSE.
Thus, B (Load the license) and C (Pre-configure the access ports) are required operations before deployment in Easy mode.
NEW QUESTION # 67
Which of the following O&M functions are supported in Huawei CloudFabric Solution? (Select All that Apply)
Answer: B,C,D
Explanation:
Huawei's CloudFabric Solution, managed by iMaster NCE-Fabric, provides robust Operations and Maintenance (O&M) capabilities. Let's evaluate each option:
A . Multi-path detection: This is true. CloudFabric supports multi-path detection (e.g., using ECMP) to verify load balancing and path diversity in the network. TRUE.
B . Network connectivity detection, such as IP ping and MAC ping: This is true. Tools like IP ping and MAC ping are supported for troubleshooting connectivity between devices and endpoints. TRUE.
C . Single-path detection: This is false. While multi-path detection is supported, single-path detection is not a distinct O&M function; connectivity checks typically involve multiple paths or end-to-end verification. FALSE.
D . Visualization of entries (MAC/IP) on logical routers and switches: This is true. CloudFabric provides visualization of MAC and IP entries on logical network elements, aiding in network management and troubleshooting. TRUE.
Thus, A, B, and D are supported O&M functions.
NEW QUESTION # 68
Both M-LAG and stacking technologies can overcome the disadvantages of traditional DCNs.
However, M-LAG is a better choice to ensure 24/7 service continuity.
Answer: B
Explanation:
Traditional data center networks (DCNs) often suffer from single points of failure, limited scalability, and traffic bottlenecks. Both M-LAG and stacking address these issues, but their suitability for 24/7 service continuity differs.
M-LAG Benefits: M-LAG (Multi-Chassis Link Aggregation) on Huawei CE switches allows two devices to act as a single logical switch, providing active-active forwarding, high availability, and rapid failover (e.g., via peer-link synchronization). It supports non-stop service during device failures, making it ideal for 24/7 continuity.
Stacking Benefits: Stacking combines multiple switches into a single logical unit, sharing a control plane. While it improves scalability and simplifies management, a stack master failure can disrupt the entire stack unless redundancy is perfectly configured, potentially affecting service continuity.
Comparison: M-LAG's decentralized design and real-time synchronization offer better fault isolation and recovery compared to stacking, where a master switch failure impacts the stack.
Huawei documentation highlights M-LAG's superiority for high-availability scenarios like 24/7 operations.
The statement is TRUE (A) because M-LAG is indeed a better choice than stacking for ensuring
24/7 service continuity due to its robust failover and redundancy features.
NEW QUESTION # 69
In the DCN architecture, spine nodes connect various network devices to the VXLAN network.
Answer: B
Explanation:
In Huawei's Data Center Network (DCN) architecture, particularly with the CloudFabric solution, the spine-leaf topology is a common design for scalable and efficient data centers. VXLAN (Virtual Extensible LAN) is used to create overlay networks, enabling large-scale multi-tenancy and flexible workload placement.
Spine Nodes' Role: In this architecture, spine nodes act as the backbone, interconnecting leaf nodes (which connect to servers, storage, or other endpoints) and facilitating high-speed, non-blocking communication. Spine nodes typically handle Layer 3 routing and serve as VXLAN tunnel endpoints (VTEPs) or connect to devices that do, integrating the physical underlay with the VXLAN overlay network.
Connection to VXLAN: Spine nodes ensure that traffic from various network devices (via leaf nodes) is routed efficiently across the VXLAN fabric. They provide the high-bandwidth, low-latency backbone required for east-west traffic in modern data centers, supporting VXLAN encapsulation and decapsulation indirectly or directly depending on the deployment.
Thus, the statement is TRUE (A) because spine nodes play a critical role in connecting the underlay network (various devices via leaf nodes) to the VXLAN overlay, as per Huawei's DCN design principles.
NEW QUESTION # 70
Which of the following statements is false about the routing design for the underlay network during DCN deployment?
Answer: C
Explanation:
The underlay network in Huawei's DCNs (e.g., CloudFabric) uses routing protocols like OSPF or BGP. Let's evaluate each statement:
A). OSPF is recommended for small and midsize DCNs, and EBGP is recommended for large and midsize networks: This is true. OSPF suits smaller networks (<300 switches), while EBGP is better for large networks (>300 switches) due to scalability. TRUE.
B). When OSPF is used on the underlay network, only single-area OSPF can be deployed: This is false. Multi-area OSPF can be deployed to manage larger networks, reducing routing table size and improving stability, a common practice in Huawei DCNs. FALSE.
C). Compared with OSPF, EBGP involves fewer calculations and offers better scalability: This is true. EBGP's path-vector nature requires fewer computational resources than OSPF's link-state calculations and scales better with large topologies. TRUE.
D). When EBGP is used on the underlay network, each group of active-active leaf nodes is deployed in an AS: This is true. In EBGP designs, active-active leaf nodes (e.g., M-LAG) are typically in the same Autonomous System (AS) to simplify routing, using iBGP or route reflectors.
TRUE.
Thus, B is the false statement because multi-area OSPF is supported, not just single-area.
NEW QUESTION # 71
......
If you have prepared well, tried all the HCIP-Data Center Network V1.0 Exams, and understood each concept clearly, there is minimal or no chance of failure. Desktop Practice exam software and web-based HCIP-Data Center Network V1.0 (H12-893_V1.0) practice test are available at Itbraindumps. These HCIP-Data Center Network V1.0 (H12-893_V1.0) practice test questions are customizable and give real HCIP-Data Center Network V1.0 (H12-893_V1.0) exam experience. Windows computers support desktop software. The web-based H12-893_V1.0 practice exam is supported by all browsers and operating systems.
Latest H12-893_V1.0 Dumps Questions: https://www.itbraindumps.com/H12-893_V1.0_exam.html
BONUS!!! Download part of Itbraindumps H12-893_V1.0 dumps for free: https://drive.google.com/open?id=1jkUJtzd1W7HURKa3v49YgW97NFO3Ww5H