P.S. Free 2026 Palo Alto Networks SD-WAN-Engineer dumps are available on Google Drive shared by Exam-Killer: https://drive.google.com/open?id=1qJaHEJ9P-jRPUOkGXt5XQedPYUoZ7YO7
It is worth mentioning that, the simulation test is available in our software version. With the simulation test, all of our customers will get accustomed to the SD-WAN-Engineer exam easily, and get rid of bad habits, which may influence your performance in the real SD-WAN-Engineer exam. In addition, the mode of SD-WAN-Engineer learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the SD-WAN-Engineer test questions would be absorbed, which is time-saving and high-efficient.
| Section | Objectives |
|---|---|
| Prisma SD-WAN Architecture and Components | - Controllers and ION Devices - Data Center and Branch Architecture - Prisma SD-WAN Solution Overview |
| Configuration and Deployment | - Initial Setup and Provisioning - WAN Interface Configuration - Network Segmentation (VLANs, Zones) |
| Policy Configuration | - QoS and Traffic Engineering - Application and Traffic Policy - Security Policy Integration |
| Monitoring and Troubleshooting | - Logs and System Health - Dashboard and Analytics - Troubleshooting Methodology |
>> SD-WAN-Engineer Reliable Braindumps Files <<
If you are working all the time, and you hardly find any time to prepare for the SD-WAN-Engineer exam, then Exam-Killer present the smart way to SD-WAN-Engineer exam prep for the exam. You can always prepare for the SD-WAN-Engineer test whenever you find free time with the help of our SD-WAN-Engineer Pdf Dumps. We have curated all the SD-WAN-Engineer questions and answers that you can view the exam Palo Alto Networks SD-WAN-Engineer PDF brain dumps and prepare for the exam. We guarantee that you will be able to pass the SD-WAN-Engineer in the first attempt.
NEW QUESTION # 68
In a data center (DC) with two ION devices, all of the remote branch Prisma SD-WAN VPNs are active only on DC ION-1.
Why are no VPNs active on DC ION-2?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
In a Prisma SD-WAN Data Center deployment, the operational state of the Secure Fabric VPNs (overlay tunnels) is directly tied to the health of the BGP Core Peer configuration.4
* Core Peer Dependency: DC ION devices typically peer with the data center core switch (Core Router) via BGP to learn the subnets (prefixes) for the applications hosted in the DC. The Prisma SD-WAN controller monitors this BGP peering status.5
* Controller Logic: If the BGP Core Peer on a DC ION goes down (or is not established), the controller automatically marks the VPN tunnels terminating at that specific ION as "Inactive".6 This is a fail- safe mechanism designed to prevent remote branches from sending traffic to a DC ION that has lost conne7ctivity to the internal data center network (and thus the applications).
* Scenario Analysis: In this scenario, DC ION-1 has active VPNs, meaning its BGP Core Peer is UP and it is successfully advertising reachability. DC ION-2 has no active VPNs, which strongly indicates that its BGP Core Peer is down.8 Because the controller sees the peer is down, it suppresses the tunnel establishment or marks existing tunnels as inactive to ensure traffic is only directed to the healthy node (ION-1).
NEW QUESTION # 69
In a Data Center deployment, what is the key functional difference between configuring a BGP neighbor as a
"Core Peer" versus an "Edge Peer"?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
In the Prisma SD-WAN Data Center (DC) model, the terminology for BGP peers defines their role in the topology and how the system generates route maps.
* Core Peer: This peer type is designated for the LAN-side connection (facing the DC Core Switch or internal Routers). Its primary purpose is to learn the subnets/prefixes hosted in the data center so the ION can advertise them to the remote branches. The system automatically creates route maps to facilitate this redistribution into the fabric.
* Edge Peer: This peer type is designated for the WAN-side connection (facing the Edge Router or MPLS PE). Its primary purpose is to provide reachability to the underlay network.
* Distinction: Selecting the correct type affects the default Route Maps and Prefix Lists generated by the controller. Configuring a Core Peer correctly ensures that the DC's internal subnets are properly learned and propagated to the overlay, whereas an Edge Peer configuration focuses on WAN next-hop reachability.
NEW QUESTION # 70
A network engineer is able to ping and traceroute from SD-WAN branch IP 192.168.1.123 to servers in primary data center - DC1, but is unable to ping or traceroute to a server 10.2.2.22 in the newly configured secondary data center, DC2.
The DC2 ION device is advertising the branch IP subnet 192.168.1.0/24 to the DC2 core via eBGP Core Peer.
The DC2 data center site has site prefix 10.2.2.0/23 configured.
Which configuration will resolve the issue in this scenario?
Answer: A
Explanation:
In a Prisma SD-WAN deployment, the routing of traffic between branches and Data Centers (DCs) relies on the proper synchronization between the AppFabric (the overlay) and the local routing protocols (the underlay
/LAN side). In this scenario, the branch can successfully reach DC1, indicating the branch ION is correctly participating in the fabric. However, traffic to DC2 (10.2.2.22) is failing.
The DC2 site has the site prefix 10.2.2.0/23 configured. In Prisma SD-WAN, defining a site prefix informs the Controller that this specific subnet "belongs" to that site, causing the Controller to advertise reachability for this prefix to all other ION devices in the fabric. Consequently, when the branch ION (192.168.1.123) attempts to reach 10.2.2.22, it correctly identifies DC2 as the destination and encapsulates the traffic toward the DC2 ION.
The bottleneck occurs once the packet arrives at the DC2 ION. While the ION is advertising the branch subnet (192.168.1.0/24) to the DC Core (ensuring the return path), the ION itself must know how to forward the incoming traffic from the branch to the internal DC network. If the DC2 ION does not have a specific route in its local routing table for the 10.2.2.0/23 subnet pointing to the DC Core's internal interface, the packet will be dropped.
According to Palo Alto Networks best practices for Data Center ION deployment, a static default route (0.0.0.0/0) should be configured on the ION device pointing toward the DC Core's next-hop IP address. This ensures that any traffic received from the AppFabric destined for internal DC resources-which are not directly connected to the ION-is successfully handed off to the core switching fabric for final delivery.
Adding this default route (Option A) resolves the reachability issue by providing the "last-hop" routing instruction within the DC.
NEW QUESTION # 71
An administrator is configuring an ION 2000 device for a deployment where high availability is required, but the site has only a single internet circuit. The administrator configures a Bypass Pair (Fail-to-Wire) on ports 1 and 2 connecting the ISP modem to the legacy firewall.
If the ION device loses power, what is the resulting behavior of the traffic flowing through this Bypass Pair?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
The Bypass Pair feature on Prisma SD-WAN ION devices (specifically supported models like ION 2000, 3000, 7000, 9000) is a hardware-based resiliency mechanism known as Fail-to-Wire.
Operation: A "Bypass Pair" logically groups two physical interfaces (e.g., WAN 1 and LAN 1). Under normal operation, the ION processes traffic between them.
Power Loss: In the event of a total power loss (or critical software failure), a mechanical relay inside the device physically closes the circuit between the two ports.
Result: This creates a direct electrical connection (like a patch cable) between the upstream device (ISP Modem) and the downstream device (Legacy Firewall or Router). This ensures that internet connectivity is preserved for the site, even if the SD-WAN appliance is completely dead. This is critical for single-point-of-failure deployments where maintaining basic dial-tone is more important than SD-WAN optimization during a hardware outage.
NEW QUESTION # 72
What does Prisma SD-WAN use for monitoring and operations to deliver flow data and application visibility?
Answer: A
Explanation:
Prisma SD-WAN is built on an application-defined fabric that prioritizes deep visibility into network traffic and application performance.1 To deliver the high-fidelity flow data and application visibility required for modern operations, Prisma SD-WAN utilizes IPFIX (Internet Protocol Flow Information Export).2 IPFIX is a standardized protocol based on NetFlow v9 that allows for the export of IP flow information from network devices to a collector or management system.3 In the Prisma SD-WAN architecture, ION devices act as the exporters.4 Because the system is application- aware, it doesn't just export basic 5-tuple information (source/destination IP, ports, and protocol); it exports rich metadata including application IDs, performance metrics (latency, jitter, packet loss), and path information. This allows the Prisma SD-WAN Controller and the associated Analytics engine to reconstruct a complete picture of every flow in the network.
While other protocols like SNMPv3 are supported for basic device health monitoring (such as CPU or interface status) and ADEM (Autonomous Digital Experience Management) provides end-to-end visibility for mobile users or SASE-connected branches, IPFIX is the primary "engine" for flow-level data across the SD-WAN fabric. Unlike traditional IP SLA, which relies on synthetic probes, the IPFIX-based monitoring in Prisma SD-WAN uses real-time application traffic to assess performance. This ensures that the visibility provided in the Flow Browser and Analytics dashboards accurately reflects the actual user experience, enabling granular troubleshooting and proactive capacity planning.
NEW QUESTION # 73
......
Our Palo Alto Networks SD-WAN-Engineer demo products hold the demonstration for our actual products, demos are offered at no cost only for raising your confidence level. Procure the quality of our product in advance, unsighted featured becomes reveal with our SD-WAN-Engineer Demo products. Free Private Cloud Monitoring and Operations with demos respond to all kind of worries that customers have in their mind while going for actual purchase.
SD-WAN-Engineer Test Dumps.zip: https://www.exam-killer.com/SD-WAN-Engineer-valid-questions.html
P.S. Free 2026 Palo Alto Networks SD-WAN-Engineer dumps are available on Google Drive shared by Exam-Killer: https://drive.google.com/open?id=1qJaHEJ9P-jRPUOkGXt5XQedPYUoZ7YO7