DOWNLOAD the newest TopExamCollection EDGE-Expert PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1HjhBLzdM5AiCbum5zOJvvHOyaCYlV-j7
The third and last format is the EDGE EDGE-Expert desktop practice exam software form that can be used without an active internet connection. This software works offline on the Windows operating system. The practice exams benefit your preparation because you can attempt them multiple times to improve yourself for the EDGE EDGE-Expert Certification test. Our Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) exam dumps are customizable, so you can set the time and questions according to your needs.
| Section | Weight | Objectives |
|---|---|---|
| EDGE Software & Application | 10% | - Using EDGE calculation tool
|
| Energy Efficiency | 25% | - Energy baseline calculation
|
| Certification Process & Roles | 10% | - Steps to certification
|
| EDGE Fundamentals & Framework | 20% | - Certification levels and criteria
|
| Materials & Embodied Carbon | 15% | - Embodied energy baseline
|
| Water Efficiency | 20% | - Water conservation measures
|
>> EDGE-Expert New Cram Materials <<
Get the test EDGE-Expert certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so EDGE-Expert exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. Users do not need to spend too much time on EDGE-Expert questions torrent, only need to use their time pieces for efficient learning, the cost is about 20 to 30 hours, users can easily master the test key and difficulties of questions and answers of EDGE-Expert Prep Guide, and in such a short time acquisition of accurate examination skills, better answer out of step, so as to realize high pass the qualification test, has obtained the corresponding qualification certificate.
NEW QUESTION # 33
A building is located in a hot and dry climate where water availability (rainfall) is low. Which of the following measures will give the lowest water savings?
Answer: A
Explanation:
In a hot and dry climate with low rainfall, water efficiency measures in EDGE are evaluated based on their potential to reduce potable water demand, but their effectiveness depends on local conditions. The EDGE User Guide explains the impact of various water-saving measures: "In regions with low rainfall, rainwater harvesting provides minimal water savings due to limited precipitation, whereas measures like low-flow showers, dual flush toilets, and black water recycling can achieve consistent savings by reducing direct water use or reusing wastewater" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option B, rainwater harvesting, relies on rainfall to collect water for non-potable uses, but in a hot and dry climate with low water availability, its effectiveness is limited: "Rainwater harvesting systems in EDGE are modeled based on local precipitation data. In arid climates with annual rainfall below 200 mm, savings from rainwater harvesting are typically less than 5% of total water demand, as the collected volume is insufficient to meet significant needs" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). In contrast, Option A (low-flow showers) reduces water use directly: "Low-flow showers can reduce water consumption by 20-30% in buildings, regardless of climate, by limiting flow rates to 6-8 liters per minute" (EDGE User Guide, Section
5.2: Water Efficiency Measures). Option C (recycle black water) also offers consistent savings: "Black water recycling systems can save 30-40% of water demand by treating and reusing wastewater for flushing or irrigation, independent of rainfall" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option D (dual flush for water closets) similarly provides reliable savings: "Dual flush toilets reduce water use by 25-35% by offering a low-flush option for liquid waste, effective in all climates" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Given the low rainfall in a hot and dry climate, rainwater harvesting (Option B) yields the lowest water savings compared to the other measures, which do not depend on precipitation. The EDGE User Guide further notes: "In dry climates, measures like rainwater harvesting are often the least effective, while demand-side measures (e.g., low-flow fixtures) and recycling systems provide higher and more consistent water savings" (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Thus, rainwater harvesting (Option B) gives the lowest water savings in this context.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Section 5.3: Additional Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations.
NEW QUESTION # 34
Which statement is correct about a "required" measure?
Answer: C
Explanation:
In the CBCI EDGE curriculum, a "required" measure refers to a measure that must be implemented in the project as part of meeting the EDGE certification criteria. Required measures are mandatory and cannot be excluded if the project is to achieve certification. Their implementation is verified during the design audit and confirmed during the site audit stage.
Option A is incorrect because simply assessing a measure is not sufficient; a required measure must be physically incorporated into the building design and construction. Option C is incorrect because a Special Ruling Request is used in exceptional cases to seek clarification or alternative compliance pathways, but required measures do not depend on SRR approval to be implemented. Option D is also incorrect because the concept of meeting or exceeding the baseline relates to performance calculations for savings, not specifically to the definition of a required measure.
Therefore, under the EDGE framework, a required measure is one that must be implemented in the project to comply with certification requirements, making option B the correct answer.
NEW QUESTION # 35
In order for a project to complete the design certification stage requirements, the EDGE Client must do which of the following?
Answer: B
Explanation:
The design certification stage (Preliminary Certification) in EDGE requires specific actions from the Client to ensure the project can be audited and certified. The EDGE Certification Protocol outlines the process: "To complete the design certification stage, the EDGE Client must provide the EDGE Auditor with access to the completed self-assessment in the EDGE software, along with all supporting documentation, such as drawings, specifications, and calculations, to verify the selected measures" (EDGE Certification Protocol, Section 3.1:
Certification Process). Option C, provide the EDGE Auditor access to the self-assessment and all supporting documentation, matches this requirement. Option A (internally review the EDGE measures) is a preparatory step, not a certification requirement: "Internal reviews are recommended but not mandated for certification" (EDGE User Guide, Section 6.1: Project Preparation). Option B (access the EDGE software and complete a self-assessment) is a prerequisite to the audit, not the final step for design certification: "The self-assessment must be completed before the audit, but certification requires submission to the Auditor" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (sign an agreement with a certification partner) is incorrect, as this is typically handled during project registration, not design certification: "Agreements with Certification Providers are signed prior to registration, not at the design stage" (EDGE Certification Protocol, Section 2.1: Registration). Thus, providing the Auditor access (Option C) is the required action.
Reference:EDGE Certification Protocol, Section 3.1: Certification Process, Section 2.1: Registration; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.
NEW QUESTION # 36
Which of the following measures provides the most attractive solution in the EDGE software for a hospital?
Answer: A
Explanation:
In the EDGE software, the "most attractive solution" for a project, such as a hospital, is determined by balancing resource savings (energy, water, or materials) with financial payback periods, as these metrics are key outputs in the EDGE App Results Bar. The EDGE User Guide explains how to evaluate measures: "The EDGE software prioritizes measures that offer the highest resource savings with the shortest payback periods, making them the most attractive solutions for project teams. For hospitals, where energy and water demands are high due to continuous operation, measures with significant savings and faster payback are typically preferred" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Let's evaluate the options: Option A (external shading) offers 7% savings (likely energy, as shading reduces cooling loads) with an 8-year payback. Option B (insulation of external walls) provides 3% savings (also energy) with a 9-year payback.
Option C (solar hot water system) delivers 15% savings (energy, as it reduces the need for electric or gas water heating) with a 6-year payback. Option D (water-cooled chillers) achieves 20% energy savings but with a 10-year payback. The EDGE Methodology Report further clarifies: "For hospitals, measures like solar hot water systems are often attractive because they address high hot water demands (e.g., for sterilization, showers), offering substantial energy savings with relatively short payback periods due to consistent usage" (EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures). Comparing the options, Option C has the second-highest savings (15%) and the shortest payback (6 years), making it more attractive than Option D (20% savings but 10 years payback), Option A (7% savings, 8 years), and Option B (3% savings, 9 years). The EDGE User Guide also notes: "A payback period of 6 years is generally considered attractive in EDGE, especially for measures with savings above 10%, as it aligns with typical investment horizons for building owners" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Additionally, for a hospital, hot water demand is significant, making solar hot water systems particularly effective: "Hospitals benefit greatly from solar hot water systems, achieving energy savings of 10-20% with payback periods often under 7 years due to high hot water usage" (EDGE Methodology Report Version 2.0, Section 4.2: Energy Savings Calculations). Thus, the solar hot water system (Option C) is the most attractive solution due to its balanced savings and shortest payback period.
Reference:EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results; EDGE Methodology Report Version 2.0, Section 5.3: Energy Measures, Section 4.2: Energy Savings Calculations.
NEW QUESTION # 37
Which of the following is NOT an option for insulation in materials efficiency measures?
Answer: B
Explanation:
Insulation materials in EDGE are evaluated for their thermal performance and embodied energy as part of materials efficiency measures. The EDGE User Guide lists common insulation options: "In EDGE, insulation materials for walls, roofs, and floors include mineral wool, polyurethane,polystyrene, and fiberglass, which are selected for their low thermal conductivity and availability in most markets" (EDGE User Guide, Section
7.2: Materials Efficiency Measures). Options A (mineral wool), B (polyurethane), and D (polystyrene) are explicitly mentioned as insulation materials in EDGE. Option C, polypropylene, is not listed as an insulation material, as confirmed by the EDGE Methodology Report: "Polypropylene is a plastic material often used in packaging or pipes, but it is not recognized in EDGE as an insulation material due to its poor thermal resistance compared to standard insulation options like polystyrene or polyurethane" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). The EDGE software's material database further excludes polypropylene from insulation options, focusing instead on materials with established thermal properties for building envelopes. Thus, polypropylene (Option C) is not an insulation option in EDGE.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
NEW QUESTION # 38
......
The product TopExamCollection provide with you is compiled by professionals elaborately and boosts varied versions which aimed to help you learn the pass your EDGE-Expert exam by the method which is convenient for you. We check the update every day, and we can guarantee that you will get a free update service from the date of purchase. Once you have any questions and doubts about our EDGE-Expert Exam Questions we will provide you with our customer service before or after the sale.
EDGE-Expert Trusted Exam Resource: https://www.topexamcollection.com/EDGE-Expert-vce-collection.html
BONUS!!! Download part of TopExamCollection EDGE-Expert dumps for free: https://drive.google.com/open?id=1HjhBLzdM5AiCbum5zOJvvHOyaCYlV-j7