The quality of our Network Appliance NS0-522 training material is excellent. After all, we have undergone about ten years' development. Never has our practice test let customers down. Although we also face many challenges and troubles, our company get over them successfully. If you are determined to learn some useful skills, our Network Appliance NS0-522 Real Dumps will be your good assistant. Then you will seize the good chance rather than others.
| Section | Objectives |
|---|---|
| ONTAP SAN implementation and configuration | - Clustered storage system NVMe configuration tasks - Data protection - SVM configuration tasks - Clustered storage systems and node configuration tasks - Clustered storage system iSCSI configuration tasks - Storage space utilization or management concepts - Switches and host systems - Clustered storage system FCP configuration tasks |
| ONTAP SAN implementation testing and troubleshooting | - Data migration - Testing tasks - Troubleshooting tasks |
| ONTAP SAN Concepts | - Data protection concepts - Switch and/or host configuration concepts - Storage controller configuration concepts - Storage space utilization or management concepts |
| ONTAP SAN solution assessment | - Prerequisites and inventory for the installation of all SAN components during planning - Environmental or physical considerations - Solution design and hardware provisioned to meet customer requirements or expectations - Configuration components using tools |
>> Latest NS0-522 Exam Review <<
Many customers may doubt the quality of our Network Appliance NS0-522 learning quiz since they haven't tried them. But our NS0-522 training engine is reliable. What you have learnt on our NetApp Implementation Engineer - SAN ONTAP Exam NS0-522 Exam Materials are going through special selection. The core knowledge of the real exam is significant.
NEW QUESTION # 87
A customer has onboarded a new application that is based on SAN, and they need to present additional storage to an FCP SAN host.
Which two tasks must be performed on the storage cluster to present the storage? (Choose two.)
Answer: A,B
Explanation:
For an FCP SAN host, the storage object to present is a LUN, and host access is controlled by mapping that LUN to an initiator group. NetApp's SAN provisioning workflow creates the LUN, creates or selects an igroup containing the host's FC WWPNs, and then creates the LUN mapping. A namespace and subsystem are NVMe constructs, not the objects used to present conventional SCSI LUN storage over FCP. Therefore, creating a namespace or mapping storage to an NVMe subsystem would not satisfy the stated FCP requirement. The question assumes the FCP SVM and host connectivity already exist; the required storage- side actions are to provision the new LUN and map it to the appropriate igroup. Relevant SAN ONTAP topics are FCP provisioning, LUN creation, igroups, WWPN-based host access, and LUN mapping.
NEW QUESTION # 88
A customer has a LUN that is already mapped and connected to a host using FCP. They now want to map the same LUN to another host using iSCSI.
Which two tasks would enable the administrator to share the LUN? (Choose two.)
Answer: C,D
Explanation:
ONTAP igroups can be created with an fcp, iscsi, or mixed protocol type. An iSCSI igroup is therefore valid for presenting the existing LUN specifically to the new iSCSI host. A mixed igroup is also valid because it permits both Fibre Channel and iSCSI initiators and can be used when access to a LUN involves both protocol types. ONTAP permits an igroup to be mapped to multiple LUNs and a LUN to be presented through appropriate SAN igroup mappings. Creating another FC-only igroup would not accommodate the new iSCSI initiator. A subsystem belongs to the NVMe architecture and is used to map NVMe namespaces to NVMe hosts; it is not used for FCP or iSCSI LUN presentation. Thus, both iSCSI and mixed igroups are valid configurations for the requirement.
NEW QUESTION # 89
What Is a recommended setting for using the NetApp ONTAP LUN fractional reserve?
Answer: B
Explanation:
The recommended setting for using the NetApp ONTAP LUN fractional reserve is to set the space guarantee to " volume " . This setting ensures that the required space for overwrites in the volume is reserved, preventing potential write failures when snapshot copies are created. This setup helps in maintaining the performance and reliability of the storage system by ensuring there is always enough space allocated for the LUN.
For further details, you can refer to:
* NetApp Community Discussion on Fractional Reserve
* NetApp Documentation on Space Management
NEW QUESTION # 90
When using tagged VLANs on Cisco Nexus switches for NVMe over TCP, which two changes must be made to enable jumbo frames? (Choose two.)
Answer: A,B
Explanation:
For enabling jumbo frames on Cisco Nexus switches for NVMe over TCP with tagged VLANs, the following changes are required:
* Modify the Cisco Nexus switches to use an MTU of 9216: Setting the MTU to 9216 ensures that the network can handle jumbo frames, reducing the number of packets needed for large data transfers and thus improving performance.
* Modify the appropriate broadcast domain in NetApp ONTAP software to use an MTU of 9216: This setting must match the network configuration to ensure end-to-end support for jumbo frames, which is essential for optimizing performance in NVMe over TCP environments.
For additional information, refer to:
* NetApp Documentation on NVMe over TCP
* Cisco Documentation on Jumbo Frames
NEW QUESTION # 91
A NetApp FC SVM and six clients have been attached to a redundant pair of Cisco fabric switches. Each NetApp controller and client has one connection to each switch.
What are two ways to verify that all client paths are connecting to the NetApp FC SVM? (Choose two.)
Answer: A,D
Explanation:
Verification should confirm actual FC logins at both the fabric and ONTAP layers. On Cisco switches, show flogi database displays devices that have successfully completed Fabric Login, enabling the engineer to confirm host and storage WWPN presence within the fabric. On ONTAP, vserver fcp initiator show displays FCP initiators that are currently logged in and identifies their associated SVM, LIF, WWPN, and igroup information. Together, these commands validate end-to-end client connectivity. show zoneset active confirms the currently activated zoning configuration but does not prove that every initiator has successfully logged in.
vserver fcp portname show concerns target port-name information rather than currently connected initiators.
Relevant SAN ONTAP topics include FLOGI, FC logins, initiator WWPNs, FCP LIFs, zoning validation, and redundant fabric troubleshooting.
NEW QUESTION # 92
......
Our NS0-522 study question is compiled and verified by the first-rate experts in the industry domestically and they are linked closely with the real exam. Our test bank provides all the questions which may appear in the real exam and all the important information about the exam. You can use the practice test software to test whether you have mastered the NS0-522 Test Practice materials and the function of stimulating the exam to be familiar with the real exam's pace. So our NS0-522 exam questions are real-exam-based and convenient for the clients to prepare for the NS0-522 exam.
NS0-522 Test Duration: https://www.trainingquiz.com/NS0-522-practice-quiz.html