Our NSEI_OTS_AR-7.6 guide tests can solve these problems perfectly, because our study materials only need little hours can be grasped. Once you use our NSEI_OTS_AR-7.6 latest dumps, you will save a lot of time. High effectiveness is our great advantage. After twenty to thirty hoursโ practice, you are ready to take the real NSEI_OTS_AR-7.6 Exam Torrent. The results will never let you down. You just need to wait for obtaining the certificate.
| Section | Objectives |
|---|---|
| Topic 1: Network Access Control | - Explain OT Ethernet concepts - Configure network access authentication - Configure network segmentation schemas |
| Topic 2: Network Security | - Configure virtual patching - Configure security inspections for industrial protocols - Configure automation |
| Topic 3: Monitoring and Risk Assessment | - Perform risk assessment and management - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer |
| Topic 4: Asset Management | - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network |
>> Fortinet NSEI_OTS_AR-7.6 Latest Exam <<
The most attractive thing about a learning platform is not the size of his question bank, nor the amount of learning resources, but more importantly, it is necessary to have a good control over the annual propositional trend. The NSEI_OTS_AR-7.6 study materials through research and analysis of the annual questions, found that there are a lot of hidden rules are worth exploring, plus we have a powerful team of experts, so the rule can be summed up and use. The NSEI_OTS_AR-7.6 Study Materials can be based on the analysis of the annual questions, it is concluded that a series of important conclusions related to the qualification examination, combining with the relevant knowledge of recent years, then predict the direction which can determine this year's exam. NSEI_OTS_AR-7.6 study materials will improve the ability to accurately forecast the topic and proposition trend this year.
NEW QUESTION # 33
Refer to the exhibit.
A FortiAnalyzer report is shown.
You must extract relevant information provided by the report regarding your OT network.
Which two statements are correct? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and C . The exhibit ' s Top Threat section identifies the IPS threats as Blocked , directly confirming that the attacks were prevented rather than merely detected. The OT Traffic table also shows destination port 502 . Modbus/TCP conventionally operates on TCP port 502, and the OT Security 7.6 study guide identifies Modbus as an industrial protocol supported and inspected by Fortinet OT security controls. The report does not cover only one day; its displayed timeline spans multiple dates, from approximately October 30 through November 3. Option D is also inconsistent with the report because the visible OT destination addresses are associated with the 192.168.x.x networks rather than 10.1.5.1.
FortiAnalyzer reports summarize logged information into charts and tables specifically to expose traffic patterns, threats, and OT activity such as this.
NEW QUESTION # 34
You want to protect OT devices that are not updated against known vulnerabilities so you apply virtual patching to the firewall policies. What must you check to confirm that the OT devices are virtually patched?
(Choose one answer)
Answer: D
Explanation:
The correct answer is C. The output of the CLI command get rule otvp status . In the Virtual Patching section, the study guide shows the workflow where FortiGate queries FortiGuard for device-specific vulnerabilities, receives OT virtual patching signatures, maps them to the device MAC address, and then explicitly displays the CLI verification command get rule otvp status together with fields such as Rule-name
, Vuln_type , and Cve . This is the direct confirmation mechanism shown in the guide for checking whether OT devices have virtual patching rules associated with them.
The other options are less accurate for confirmation. The OT View page is for Purdue-level visualization, and the Asset Identity List page shows device and asset information, but neither is presented in the guide as the command or control used to verify virtual patching status. The study guide specifically uses get rule otvp status as the status check tied to virtual patching behavior.
NEW QUESTION # 35
Refer to the exhibit.
An automation trigger creation wizard is shown. You want to automate some tasks in your OT network. In a FortiGate device, you create a new automation trigger based on a FortiAnalyzer event handler. When you want to configure the Event handler name field, the event handler created in FortiAnalyzer is not shown.
What are two reasons for this? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and B .
Option B is correct because the study guide states that "When a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" to FortiGate. If Automation Stitch is not enabled in the FortiAnalyzer event handler, that handler will not be usable for the FortiGate automation- stitch workflow. The guide also explains that the configuration of each event handler can include
"Automation stitches" and "Rules," showing that this is a required part of the FortiAnalyzer-to-FortiGate automation path.
Option A is also correct. The study guide explains the automation flow in the Security Fabric:
"FortiAnalyzer parses the logs and notifies the root FortiGate" and then "The root FortiGate triggers the action." That means FortiGate must have the FortiAnalyzer connection configured through the Security Fabric side before it can consume FortiAnalyzer event handlers. The warning in the exhibit about configuring a FortiAnalyzer connection also points directly to that requirement.
Option C is incorrect because + Create is not the reason the existing event handler is missing; it is only an interface control. Option D is not the best answer for this item because the question is about why the event handler name list on FortiGate is empty for FortiAnalyzer-triggered automation. The study guide's verified requirements for that workflow are the FortiAnalyzer-to-FortiGate Fabric connection and enabling Automation Stitch on the FortiAnalyzer event handler.
NEW QUESTION # 36
Refer to the exhibits.
A partial Basic Event Handler page on FortiAnalyzer and the creation of a trigger in a FortiGate device are shown. To improve the protection of your OT network, you want to automate the handling of compromised devices notified through FortiAnalyzer. You have configured an event handler named Alert_trigger as shown in the exhibit. When you create the trigger on the FortiGate device, the Event handler name field does not provide the Alert_trigger option. What two actions must you perform to make the Alert_trigger option available? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are C and D .
Option C is correct because the study guide explains that when "a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" and, in the Security Fabric workflow, "FortiAnalyzer parses the logs and notifies the root FortiGate." This means FortiGate must first have the FortiAnalyzer connection configured so it can consume FortiAnalyzer event handlers and use them in automation. The wizard message in the exhibit also points to this requirement by indicating that a FortiAnalyzer connection must be configured.
Option D is also correct because the study guide explicitly says that in this automation flow "the root FortiGate triggers the action" and shows "Stitches configured on root FortiGate." Therefore, if you want the FortiAnalyzer event handler to appear and be usable for automation, the trigger must be configured on the root FortiGate , not on an arbitrary downstream FortiGate.
Option A is incorrect because + Create is only a GUI control and does not solve the missing-event-handler visibility problem. Option B is not identified in the study guide as the requirement for making a FortiAnalyzer event handler available in the FortiGate automation trigger list.
NEW QUESTION # 37
Refer to the exhibit.
A partial OT network is shown. In this OT network, you must add additional security measures to detect OT protocols and, therefore, increase the traffic visibility. Which security sensor must you implement to detect the OT protocols in this network? (Choose one answer)
Answer: D
Explanation:
The correct answer is C. Application sensor set to monitor on all the FortiGate devices .
The study guide clearly explains that application control is the feature used to identify OT protocols. It states that "application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" and also says "You can use application control signatures to detect OT protocols." It further shows an example where a Modbus application control profile is enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly matches the requirement in the question, which is to detect OT protocols and increase traffic visibility .
The other options do not fit the requirement as precisely. Device detection is for identifying devices and collecting endpoint information, not for detecting industrial protocols. Inline IDS and IPS are focused more on detecting or blocking attacks, exploits, protocol abnormalities, and known vulnerabilities. While IPS can inspect some OT traffic, the study guide distinguishes it from application control by stating that IPS signatures tend to detect exploits, whereas application control signatures tend to provide protocol detection at various levels . Therefore, the required security sensor for OT protocol detection and traffic visibility is the application sensor in monitor mode .
NEW QUESTION # 38
......
In order to provide the most effective NSEI_OTS_AR-7.6 exam materials which cover all of the current events for our customers, a group of experts in our company always keep an close eye on the changes of the NSEI_OTS_AR-7.6 exam even the smallest one, and then will compile all of the new key points as well as the latest types of exam questions into the new version of our NSEI_OTS_AR-7.6 Practice Test, and you can get the latest version of our NSEI_OTS_AR-7.6 study materials for free during the whole year. Do not lose the wonderful chance to advance with times.
NSEI_OTS_AR-7.6 Guaranteed Questions Answers: https://www.lead2passed.com/Fortinet/NSEI_OTS_AR-7.6-practice-exam-dumps.html