PDF 300-515 Cram Exam, 300-515 Exam Question

Hundreds of applicants who register themselves for the Implementing Cisco Service Provider VPN Services (300-515) certification exam, lack updated practice test questions to prepare successfully in a short time. As a result of which, they don't crack the Implementing Cisco Service Provider VPN Services (300-515) examination which causes a loss of time and money and sometimes loss of the encouragement to take the test for the second time. Real4exams can save you from facing these issues with its real Cisco 300-515 Exam Questions.

The Cisco 300-515 exam is intended for IT professionals who work in service provider environments and have at least three to five years of experience with VPN technologies. Implementing Cisco Service Provider VPN Services certification is particularly useful for network engineers, network architects, and network administrators who are responsible for deploying, configuring, and maintaining VPN services in a service provider environment. The Cisco 300-515 exam is a great opportunity for IT professionals to enhance their skills and improve their career prospects.

Cisco 300-515 Certification Exam is designed for professionals who want to demonstrate their expertise in implementing Cisco Service Provider VPN Services. 300-515 exam tests the candidate's knowledge and skills related to the implementation of VPN technologies, such as MPLS Layer 3 VPNs, MPLS Layer 2 VPNs, and Ethernet VPNs. 300-515 exam also covers topics related to the configuration and troubleshooting of these technologies in a service provider environment.

>> PDF 300-515 Cram Exam <<

Reliable 300-515 exam dumps provide you wonderful study guide - Real4exams

The Cisco 300-515 certification exam is one of the top-rated and valuable credentials in the Cisco world. This Cisco 300-515 certification exam is designed to validate a candidate's skills and knowledge. With Cisco 300-515 Certification Exam everyone can upgrade their expertise and knowledge level.

Cisco 300-515 Exam is a certification test designed to assess the knowledge and skills of IT professionals in implementing Cisco Service Provider VPN services. 300-515 exam is a part of the CCNP Service Provider certification track, which aims to validate the expertise of individuals in deploying, maintaining, and troubleshooting various service provider technologies.

Cisco Implementing Cisco Service Provider VPN Services Sample Questions (Q141-Q146):

NEW QUESTION # 141
Which two frames can be configured on an Ethernet flow point? (Choose two.)

A. of a specific VLAN
B. with different class of service values
C. with different type of service values
D. with no tags
E. with identical type of service value

Answer: A,D

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-5-1/b-ce-xe-16-5-asr900/trunk-efp-support.html

NEW QUESTION # 142
What is the primary benefit provided by Unified MPLS?

A. It allows IPV6 routes to be carried outside of BGP.
B. It uses BGP to transport labels between different IGP domains which reduces the need to exceed the router's IGP route threshold.
C. It expands the capability of link-state routing protocols to hold multiple routes.
D. It eliminates the need for labels to route traffic between autonomous systems.

Answer: B

Explanation:
Unified MPLS (also called Seamless MPLS) is a scaling architecture that lets you keep multiple IGP domains separate and small instead of running one giant flat IGP across the entire network.
The loopbacks and transport prefixes from other domains are not redistributed into the local IGP
- instead, BGP labeled unicast (RFC 3107 / BGP-LU) carries those prefixes and their labels across the domain boundaries. This builds an end-to-end LSP without bloating any single router's IGP routing table, which is exactly what keeps the network scalable.

NEW QUESTION # 143
Refer to the exhibit. Router R1 is configured with the default OAM configuration with active mode enabled. After a series of link failures caused significant delays for users attempting to access the file server, the enterprise engineering team decided to implement Ethernet OAM to check for link failures and faults within the network.
Which action must the team take so that remote OAM is alerted when a fault occurs?

A. Implement repetitive pings to identify when breaks in communication occur.
B. Implement repetitive traceroutes to monitor the path of Ethernet traffic.
C. Implement link monitoring to identify and capture error events.
D. Implement discovery to monitor links within the network and record errors.

Answer: C

Explanation:
Ethernet OAM link monitoring is the mechanism responsible for detecting link faults and generating error events that can be signaled to the remote endpoint. By enabling link monitoring, the OAM process can identify degradation or failures and notify the remote device accordingly.

NEW QUESTION # 144
You try to configure MPLS VPN VRF Selection based on a source IP address on an interface that has VRF configured, but you receive an error.
Which action must you take to correct the problem?

A. Add the IP address to the VRF table.
B. Change the source IP address.
C. Remove the VRF from the interface.
D. Configure static routes for the VRF.

Answer: C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/vrfselec.html

NEW QUESTION # 145
Refer to the exhibit. A network engineer is configuring EVPN IRB on a PE router. Layer 3 connectivity is working between the routers. The network design permits the hosts in an IP subnet to be provisioned anywhere in the data center. Which additional configuration completes the process?

A. interface Bundle-Ether3
lacp system mac 1.1.1
vrf evpn-irb
address-family ipv4 unicast
import route-target
500:1
export route-target
500:1
interface Bundle-Ether3.101 12transport
encapsulation dot1q 101
rewrite ingress tag pop 1 symmetric
B. interface Bundle-Ether3
lacp system mac 1.1.1
vrf evpn-irb
address-family ipv4 unicast
import route-target
1:500
export route-target
500:1
interface Bundle-Ether3.101 12transport
encapsulation dot1q 101
rewrite ingress tag pop 1 symmetric
interface BVI101
host-routing
vrf evpn-irb
ipv4 address 10.10.10.1 255.255.0.0
mac-address 0000.3030.1
C. interface Bundle-Ether3
lacp system mac 1.1.1
vrf evpn-irb
address-family ipv4 unicast
import route-target
500:1
interface BVI101
host-routing
vrf evpn-irb
ipv4 address 10.10.10.1 255.255.0.0
mac-address 0000.3030.1
D. interface Bundle-Ether3
lacp system mac 1.1.1
vrf evpn-irb
address-family ipv4 unicast
import route-target
500:1
interface BVI101
host-routing
vrf evpn-irb
ipv4 address 10.10.10.1 255.255.0.0
mac-address 0000.3030.1

Answer: B

Explanation:
For EVPN-IRB you still need to:
1. Bind the VLAN sub-interface into your L2VPN by configuring the 12transport encapsulation and symmetric tag-pop:
interface Bundle-Ether3.101 12transport
encapsulation dot1q 101
rewrite ingress tag pop 1 symmetric
2. Configure the BVI with the IRB IP, enable host-routing in the VRF, and assign a MAC address:
interface BVI101
host-routing
vrf evpn-irb
ipv4 address 10.10.10.1/16
mac-address 0000.3030.1
3. Under the IPv4 unicast address-family for that VRF, import (and export, if needed) the same RT so the IRB routes are carried in MP-BGP:
router bgp 101
vrf evpn-irb
address-family ipv4 unicast
import route-target 500:1
export route-target 500:1

NEW QUESTION # 146
......

300-515 Exam Question: https://www.real4exams.com/300-515_braindumps.html