What's more, part of that TestPDF HPE7-A01 dumps now are free: https://drive.google.com/open?id=17a2257bQQPdqa5IFHJFgyvV95udfzG5K
The HP Practice Test engine included with HPE7-A01 exam questions simulates the actual HPE7-A01 examinations. This is excellent for familiarizing yourself with the Aruba Certified Campus Access Professional Exam and learning what to expect on test day. You may also use the HP HPE7-A01 online practice test engine to track your progress and examine your answers to determine where you need to improve on the HPE7-A01 exam.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Troubleshooting | 6% | - Fault Isolation and Diagnostics
|
| Topic 2: Authentication and Authorization | 8% | - AAA Services
|
| Topic 3: Performance Optimization | 7% | - Optimization Techniques
|
| Topic 4: Network Resiliency and Device Virtualization | 8% | - Redundancy and High Availability
|
| Topic 5: Switching | 14% | - Layer 2 and Layer 3 Switching
|
| Topic 6: WLAN | 17% | - Wireless LAN Technologies
|
| Topic 7: Connectivity | 8% | - Campus Connectivity Technologies
|
| Topic 8: Managing and Monitoring | 6% | - Network Operations
|
| Topic 9: Routing | 13% | - Routing and Network Services
|
| Topic 10: Network Stack | 4% | - Networking Fundamentals
|
| Topic 11: Security | 9% | - Campus Security
|
Our PDF version of HPE7-A01 training materials is legible to read and remember, and support printing request. Software version of HPE7-A01 practice materials supports simulation test system, and give times of setup has no restriction. Remember this version support Windows system users only. App online version of HPE7-A01 Exam Questions is suitable to all kinds of equipment or digital devices and supportive to offline exercise on the condition that you practice it without mobile data.
NEW QUESTION # 120
A customer wants to enable wired authentication across all their CX switches One of the requirements is that the switch must be able to authenticate a single computer connected through a VoIP phone.
Which feature should be enabled to support this requirement?
Answer: A
Explanation:
Multi-Domain Authentication is the feature that should be enabled to support the requirement that the switch must be able to authenticate a single computer connected through a VoIP phone. Multi-Domain Authentication is a feature that allows an Aruba CX switch to apply different authentication methods and policies to different devices connected to the same port. For example, a VoIP phone and a computer can be connected to the same port using a single cable, but they can be authenticated separately using different credentials and assigned to different VLANs. The other options are incorrect because they either do not support multiple devices on the same port or do not provide authentication. References: https://www.
arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7540/GUID-7D9E9F6E-5C2A-4F7E-BE6D- A2C3A6C7B9F9.html https://www.arubanetworks.com/assets/tg/TB_ArubaCX_Switching.pdf
NEW QUESTION # 121
You are configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network Traffic originating from 10.2.250.0/24 should use a new default route to 10.1.1.253. Other non-default routes for this subnet should not be affected by this change.
What are two parts of the solution for these requirements? (Select two.)
Answer: C,E
Explanation:
Explanation
These are the correct parts of the solution for the requirements of configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network. Option A defines a PBR policy named test-default-route with a rule named new-default-route that matches traffic from source IP address
10.2.250.0/24 and sets the next hop IP address to 10.1.1.253. Option E applies the PBR policy to VLAN 10 interface, which is the subnet that needs to use the new default route. The other options are incorrect because they either do not match the correct traffic or do not set the correct next hop. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html
NEW QUESTION # 122
What is a primary benefit of BSS coloring?
Answer: A
Explanation:
The primary benefit of BSS coloring is D. BSS color tags are applied to Wi-Fi channels and can reduce the threshold for interference.
BSS coloring is a mechanism that allows Wi-Fi 6 devices to mark each frame with a color code that identifies the BSS (Basic Service Set) it belongs to. This helps differentiate between frames from different BSSs that share the same channel and avoid unnecessary collisions and backoffs. BSS coloring also introduces an adaptive threshold for interference, which means that Wi-Fi 6 devices can adjust the signal strength value that determines whether a channel is busy or not based on the current network environment. This allows for more efficient use of spectrum and higher throughput in dense scenarios12.
NEW QUESTION # 123
With the AOS-CX switch configuration, what is the Active Gateway feature that is used for hello messages?
Answer: C
Explanation:
AOS-CX Active Gateway is used with a VSX pair to provide an active-active first-hop gateway. Both VSX peers share the same virtual IP address and virtual MAC address (VMAC), allowing either peer to route traffic received from downstream hosts.
HPE Aruba Networking documents that each Active Gateway periodically sends a broadcast hello packet so that downstream access switches continue learning the Active Gateway VMAC and do not age it out of their MAC address tables . HPE Support For this Active Gateway hello mechanism, the relevant implementation is a Layer 2, non-IP Ethernet packet
. This is consistent with its purpose: the packet is used primarily to refresh Layer 2 MAC learning for the shared VMAC rather than to establish an IP-layer neighbor relationship.
The other answers correspond to unrelated mechanisms. UDP port 5555 is associated in Aruba environments with functions such as AP packet-capture traffic, not VSX Active Gateway hello operation. Aruba Networks TCP port 6363 and multicast address 224.0.1.3 are likewise not used for Active Gateway hello messages.
Therefore, the correct answer is D. Non-IP Ethernet packet .
Study Guide Topics: AOS-CX VSX, Active Gateway, Virtual MAC Address, Active-Active First Hop Gateway, MAC Table Learning, Broadcast Hello Packets.
NEW QUESTION # 124
Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements. After the configuration was complete, it was noted that a user assigned with the auditors role did not have the appropriate level of access on the switch.
The user was not allowed to perform firmware upgrades and a privilege level of 15 was not assigned to their role. Which default management role should have been assigned for the user?
Answer: B
Explanation:
The correct answer is B. sysops.
The sysops user role is a predefined role that allows users to perform system operations on the switch, such as backup, restore, upgrade, or reboot. The sysops user role also has access to the PUT and POST methods for REST API, which can be used to modify the switch configuration. The sysops user role has a privilege level of 15, which is the highest level of access on the switch1.
The other options are incorrect because:
A) sysadmin: The sysadmin user role is a predefined role that allows users to view and modify the switch configuration using the CLI or the Web UI. The sysadmin user role does not have access to the REST API methods, and cannot perform firmware upgrades1.
C) administrators: The administrators user role is a predefined role that has full access to all switch configuration information and all REST API methods. This role is more than what the Director of Security requires1.
D) config: The config user role is a predefined role that allows users to view and modify the switch configuration using the CLI or the Web UI. The config user role does not have access to the REST API methods, and cannot perform firmware upgrades1.
NEW QUESTION # 125
......
Free demo is available for HPE7-A01 exam bootcamp, so that you can have a deeper understanding of what you are going to buy. In addition, HPE7-A01 exam dumps are high quality and accuracy, since we have professional technicians to examine the update every day. You can enjoy free update for 365 days after purchasing, and the update version for HPE7-A01 Exam Dumps will be sent to your email automatically. In order to build up your confidence for the exam, we are pass guarantee and money back guarantee for HPE7-A01 training materials, if you fail to pass the exam, we will give you full refund.
Exam HPE7-A01 Cost: https://www.testpdf.com/HPE7-A01-exam-braindumps.html
BTW, DOWNLOAD part of TestPDF HPE7-A01 dumps from Cloud Storage: https://drive.google.com/open?id=17a2257bQQPdqa5IFHJFgyvV95udfzG5K