Cisco 300-110 Practice test is an integral part of Designing Cisco Wireless Networks (300-110) exam preparation. Actual4Exams offers desktop-based 300-110 practice exam software and web-based Designing Cisco Wireless Networks (300-110) practice test that simulates the real Designing Cisco Wireless Networks (300-110) exam environment. These Designing Cisco Wireless Networks (300-110) practice tests are designed to help identify strengths and weaknesses.
| Section | Weight | Objectives |
|---|---|---|
| WLAN High Availability and Security Design | 20% | - Management and monitoring design - High availability design
|
| Wireless Site Survey | 25% | - RF propagation and attenuation analysis - Pre-deployment survey and validation - Layer 1 site survey execution and analysis - Design requirements collection and constraint evaluation
|
| Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
| Mobility Design | 25% | - Guest mobility and BYOD design - Mobility architecture models
|
>> Updated 300-110 Testkings <<
One of the advantages of the 300-110 training test is that we are able to provide users with free pre-sale experience, the 300-110 study materials pages provide sample questions module, is mainly to let customers know our part of the subject, before buying it, users further use our 300-110 Exam Prep. At the same time, it is more convenient that the sample users we provide can be downloaded PDF demo for free, so the pre-sale experience is unique. So that you will know how efficiency our 300-110 learning materials are and determine to choose without any doubt.
NEW QUESTION # 51
A hospital has a Cisco Catalyst 9800 Series Wireless Controller in an SSO solution deployed in the primary data center. The hospital plans to increase redundancy in the wireless environment.
Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)
Answer: A,B
Explanation:
For APs to be able to fail over between a primary SSO pair in one data center and a standalone WLC in a remote data center connected via WAN with firewalls, two design requirements must be met. First, a mobility tunnel must be created between the wireless controllers (Option A). The mobility tunnel enables the controllers to exchange mobility control messages, peer information, and eventually AP context when failover occurs. Without the mobility tunnel, the remote WLC is not recognized as a valid failover target by the APs through the mobility domain. Second, UDP ports 16666 and 16667 must be open through the firewalls between the controllers (Option D).
UDP port 16666 is used for mobility control traffic and UDP port 16667 is used for mobility data traffic -- both must be permitted through the firewalls at both data centers for the mobility tunnel to establish and function.
NEW QUESTION # 52
An enterprise network administrator is asked to set up an experimental WLAN for a collaboration project with a local service provider. The WLAN must be anchored to a WLC in the service provider data center using legacy mobility mode. After the configurations are completed on the WLCs and the firewalls in the path, the data path mobility tunnel is failing to come up. What should be performed by the administrator to debug the issue?
Answer: C
Explanation:
When a data path mobility tunnel fails to come up between WLCs, one of the key troubleshooting steps is to verify whether the necessary ports are open through firewalls in the path. Cisco AireOS mobility tunnels use UDP port 16666 for mobility control traffic and IP Protocol 97 (EtherIP) for mobility data traffic in legacy mode. Establishing a Telnet connection from a local PC to the firewall on port 16666 tests whether the control path port is reachable and not being blocked by the firewall. If the Telnet connection fails, it confirms that the firewall is blocking port 16666, which would prevent the mobility control tunnel from establishing - a prerequisite for the data tunnel. While a Telnet test to port 16666 specifically tests the control path, in practice this is the first verification performed when the data path cannot establish (since the data path depends on the control path being operational). IP Protocol 97 cannot be tested via Telnet (which is TCP). The mping command (Option D, not ' mapping ' ) tests mobility tunnel connectivity from the WLC itself after the tunnel is established. Reference: WLSD Study Guide - Mobility Tunnel Troubleshooting, Firewall Port Requirements, UDP 16666 and IP Protocol 97.
NEW QUESTION # 53
A network engineer is designing a wireless network to support high availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover. Which two requirements need to be incorporated into the design to meet these needs?
(Choose two.)
Answer: C,D
Explanation:
To support high availability with client SSO (Stateful Switchover) and no interruption to live services during failover, the design must incorporate two requirements. First, redundant WLCs (Option A) are essential - without a physical standby controller, there is no entity to take over when the primary WLC fails. In an SSO configuration, one WLC is active and one is standby, and the standby must be ready to assume the active role instantaneously. Second, the high availability pair requires one of the WLCs to have a valid AP count license (Option B). In a Cisco WLC SSO pair, the standby controller ' s AP count license applies when it becomes active - without a valid license on at least one WLC in the pair, APs cannot join after failover. A 10-second RTT maximum (Option C) is a latency requirement for the redundancy link but is not a primary design requirement that addresses the overall high availability architecture. A back-to-back direct connection (Option D) is one way to connect the redundancy ports but is not mandatory if a low-latency switch connection is used. Code version 7.5 or newer (Option E) is a requirement for specific legacy SSO platforms but not a general design principle. Reference: WLSD Study Guide - WLC SSO High Availability Design, AP License Requirements, Redundant Controller Architecture.
NEW QUESTION # 54
A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices.
The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 Mbps. What should be included in the design to accomplish this objective?
Answer: A
Explanation:
For a high-density classroom deployment using 5 GHz with channel bonding in groups of two (40 MHz channels), the correct configuration is to set the channel width for 802.11a (5 GHz) to 40 MHz and set the 24 Mbps data rate to Mandatory. Channel bonding refers to combining two adjacent 20 MHz channels into a single 40 MHz channel, doubling the channel width. Since the requirement specifies 5 GHz operation (where high-density design is appropriate), this must be applied to the 802.11a radio profile, not 802.11b (which operates only on 2.4 GHz). Setting 24 Mbps as Mandatory ensures that APs transmit management frames (beacons, probe responses, and other control frames) only at 24 Mbps - this is how the ' only allow APs to send 802.11 management frames at 24 Mbps ' requirement is implemented. Setting it as Supported (Options B and D) would allow the AP to use lower rates for management frames. Options A and D incorrectly target
802.11b, which does not support 40 MHz channels. Reference: WLSD Study Guide - High-Density WLAN Design, 802.11a Channel Configuration, Data Rate and Channel Width Settings.
NEW QUESTION # 55
A customer is building a new warehouse facility that has only its foundation and perimeter walls built. The building will be complete in the next eight months. The customer needs a detailed bill of materials and costs for a wireless network that must support RF scanners throughout the warehouse. How should the survey be performed?
Answer: C
Explanation:
A predictive survey (also called a virtual or model-based survey) is the appropriate and only feasible methodology for a facility that does not yet physically exist in its complete form. Since the warehouse has only its foundation and perimeter walls, it is impossible to conduct any form of physical (active or passive) survey of the complete environment. A predictive survey uses architectural floor plans imported into a tool such as Ekahau Site Survey, where the engineer defines attenuation areas representing planned materials and structures: concrete block walls, steel shelving racks, metallic surfaces, and other warehouse-specific obstructions. The software models RF propagation through these defined attenuation values, enabling accurate AP placement planning, antenna selection, and channel planning without physical access to the complete facility. The output is a validated bill of materials with AP counts, models, and associated infrastructure requirements. Passive surveys (Options A and C) require physical APs transmitting RF signals to collect measurement data - impossible in an incomplete building. A hybrid approach mixing passive survey with predictive modeling introduces measurement errors from the incomplete physical state. Reference: WLSD Study Guide - Survey Types, Predictive Survey Methodology, Pre-Deployment Planning for New Construction.
NEW QUESTION # 56
......
Don't let the 300-110 exam stress you out! Prepare with Cisco 300-110 exam dumps and boost your confidence in the real Cisco 300-110 exam. We ensure your road towards success without any mark of failure. Time is of the essence - don't wait to ace your Cisco 300-110 Certification Exam!
300-110 Exam Bible: https://www.actual4exams.com/300-110-valid-dump.html