P.S. Free & New H35-580_V2.0 dumps are available on Google Drive shared by DumpsTests: https://drive.google.com/open?id=1sjb8XPUaSbSsLp92-6gjP5DhfccAAI5X
The clients at home and abroad strive to buy our H35-580_V2.0 study materials because they think our products are the best study materials which are designed for preparing the test Huawei certification. They trust our H35-580_V2.0 study materials deeply not only because the high quality and passing rate of our H35-580_V2.0 study materials but also because our considerate service system. They treat our H35-580_V2.0 Study Materials as the magic weapon to get the Huawei certificate and the meritorious statesman to increase their wages and be promoted. You may be not quite familiar with our H35-580_V2.0 study materials and we provide the detailed explanation of our H35-580_V2.0 study materials as follow for you have an understanding before you decide to buy.
| Section | Objectives |
|---|---|
| Topic 1: Radio Network Planning (RNP) | - Site selection and parameter planning - Capacity planning and dimensioning - Coverage planning principles |
| Topic 2: Radio Network Optimization (RNO) | - Mobility optimization (handover, cell reselection) - KPI monitoring and analysis - Coverage and interference optimization |
| Topic 3: 5G Performance and Troubleshooting | - Drive test and data analysis - Fault diagnosis and optimization methods |
| Topic 4: 5G Fundamentals | - 5G network architecture and key concepts - 5G NR principles and key technologies |
>> Reliable H35-580_V2.0 Exam Dumps <<
H35-580_V2.0 Soft test engine can simulate the real exam environment, and your nerves will be lessened and your confidence for the exam can be strengthened if you choose this version. What’s more, we offer you free demo to have a try before buying H35-580_V2.0 exam dumps, so that you can have a deeper understanding of what you are going to buy. H35-580_V2.0 Exam Materials cover almost all knowledge points for the exam, and they will be enough for you to pass the exam. Free update for one year is available, and our system will send you the latest information for H35-580_V2.0 exam braindumps once it has update version.
NEW QUESTION # 72
Which of the following is not the cause of cell unavailability due to system faults (specified using
N.Cell.Unavail.Dur.System)?
Answer: A
Explanation:
Explanation
According to the HCIA-5G V2.0 Exam Outline, cell unavailability due to system faults (specified using
N.Cell.Unavail.Dur.System) is caused by factors such as CPRI link faults, board faults, and faults on an RF module's TX or RX channels, which correspond to options A, C, and D. Blocking cells by using MML commands is not a system fault, but a manual operation, which corresponds to option B.
NEW QUESTION # 73
Which of the following are the cause values of QoS flow setup failures?(Select All that Apply)
Answer: B,C
Explanation:
Explanation
According to the HCIA-5G V2.0 Exam Outline, no response from the UE, insufficient radio resources, and unauthorized UE are cause values of QoS flow setup failures, which correspond to options A, B, and D.
Insufficient transmission resources is not a cause value of QoS flow setup failures, but a cause value of handover execution failures, which corresponds to option C.
NEW QUESTION # 74
In NSA networking, if the external cell and neighbor relationship between eNodeB and gNodeB is not configured, which of the following problems will occur?
Answer: A
Explanation:
Without the external cell and neighbor relationship configuration, the eNodeB cannot map NR measurement results to a valid target gNodeB and therefore cannot initiate the SgNB addition procedure.
NEW QUESTION # 75
If the MeasAndMobParametersMRDC of the terminal MR-DC capability contains the independentGapConfig information element, which GAP configuration is recommended for NR inter-frequency measurement?
Answer: B
Explanation:
When the UE supports independentGapConfig, Per UE GAP is the recommended configuration because it provides flexible measurement gap management across radio technologies.
NEW QUESTION # 76
In NSA networking, which of the following methods can be used to support X2 interconnection between an eNodeB and a gNodeB?(Select All that Apply)
Answer: A,C
Explanation:
Explanation
According to the 5G EN-DC Architecture and Interfaces, there are two methods that can be used to support X2 interconnection between an eNodeB and a gNodeB in NSA networking:
Interconnection through CI interfaces on the UMPT boards in different subracks: The UMPT is a universal main processing and transmission unit that provides main processing and transmission functions for a subrack. The UMPT has two CI interfaces that can be used for X2 interconnection with other base stations. The CI interfaces support CPRI, OBSAI, and eCPRI protocols and can use optical fibers or electrical cables for transmission. The CI interfaces can be configured as master or slave interfaces depending on the network topology.
IPRAN interconnection between subracks: IPRAN is an IP-based radio access network that uses IP transport technologies to carry base station traffic over Ethernet or MPLS networks. IPRAN can support X2 interconnection betweendifferent base stations by using IP routers or switches. IPRAN can provide flexible networking, high bandwidth, low latency, and high reliability for X2 interconnection.
The other two methods are not valid for X2 interconnection between an eNodeB and a gNodeB:
Interconnection via backplane in a subrack: This method is only applicable for X2 interconnection between two eNodeBs or two gNodeBs that are installed in the same subrack. The backplane is the internal bus that connects different boards within a subrack. The backplane supports CPRI, OBSAI, and eCPRI protocols and can provide high-speed data transmission between boards.
Interconnection through HEI interfaces on the UBBP boards in different subracks: This method is not supported by Huawei base stations. The HEI interface is a high-speed Ethernet interface that is used for data transmission between base stations and core networks or transport networks. The HEI interface supports S1, Xn, F1, E1, and N2 protocols and can use optical fibers or electrical cables for transmission. The HEI interface cannot be used for X2 interconnection between base stations.
Therefore, the correct answer is A and D.
NEW QUESTION # 77
......
The DumpsTests is currently in use by a lot of students and they have rated it as one of the best study materials for the preparation of HCIA-5G-RNP&RNO V2.0 (H35-580_V2.0) test. The customers are satisfied because the DumpsTests comes with free demos and up to 1 year of free updates. We have a 24/7 support team which means the user can get help anytime if they face any problem. Our support team will always help the customers whenever they face issues. Customers can start using the HCIA-5G-RNP&RNO V2.0 (H35-580_V2.0) instantly after purchasing it from us. Buy It Now and Take The First Step Towards Success!
Exam H35-580_V2.0 Answers: https://www.dumpstests.com/H35-580_V2.0-latest-test-dumps.html
P.S. Free & New H35-580_V2.0 dumps are available on Google Drive shared by DumpsTests: https://drive.google.com/open?id=1sjb8XPUaSbSsLp92-6gjP5DhfccAAI5X