BONUS!!! Download part of PassTestking NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=1IVFhQhD64edbYeuQl1Y_wF85Rxg9Z4dS
It will provide them with the NSEI_OTS_AR-7.6 exam pdf questions updates free of charge if the NSEI_OTS_AR-7.6 certification exam issues the latest changes. If you work hard using our top-rated, updated, and excellent Fortinet NSEI_OTS_AR-7.6 PDF Questions, nothing can refrain you from getting the Fortinet NSEI_OTS_AR-7.6 certificate on the maiden endeavor.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Access Control | 25% | - Authentication and access policies for OT devices - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models |
| Topic 2: Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) |
| Topic 3: Network Security | 25% | - Virtual patching for legacy OT systems - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Topic 4: Monitoring and Risk Assessment | 25% | - Event handling and logging with FortiAnalyzer 7.6 - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management |
>> NSEI_OTS_AR-7.6 Preparation <<
Our NSEI_OTS_AR-7.6 exam questions zre up to date, and we provide user-friendly NSEI_OTS_AR-7.6 practice test software for the NSEI_OTS_AR-7.6 exam. Moreover, we are also providing money back guarantee on all of Fortinet NSE I - OT Security 7.6 Architect test products. If the NSEI_OTS_AR-7.6 braindumps products fail to deliver as promised, then you can get your money back. The NSEI_OTS_AR-7.6 Sample Questions include all the files you need to prepare for the Fortinet NSEI_OTS_AR-7.6 exam. With the help of the NSEI_OTS_AR-7.6 practice exam questions, you will be able to feel the real NSEI_OTS_AR-7.6 exam scenario, and it will allow you to assess your skills.
NEW QUESTION # 25
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: D,E
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 26
Refer to the exhibit.
Based on the information provided on the partial Event Monitor page shown in the exhibit, how was the attack detected? (Choose one answer)
Answer: A
Explanation:
The correct answer is D. Automatically by an event handler . The study guide explicitly states that "Event handlers generate events on FortiAnalyzer" and "FortiAnalyzer uses event handlers to filter all incoming logs. If the logs received match the conditions set in the event handlers, FortiAnalyzer generates an event." It also says "You can view all generated events on the Event Monitor page." This directly matches the exhibit, which is showing entries on the Event Monitor page. Therefore, the attack shown there was detected automatically through an event handler .
The guide also explains the detection flow: "FortiAnalyzer receives logs," "FortiAnalyzer parses logs," and "FortiAnalyzer generates an event if a rule is matched in an event handler." In addition, the Event Monitor view includes the Handler column, which identifies the event handler that generated the event. That is why the attack is not considered manually detected, and it is not primarily detected by a playbook or stitch.
Playbooks and stitches are used for subsequent automation actions, but the event appearing in Event Monitor is created by the event handler mechanism.
NEW QUESTION # 27
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: A,D
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 28
Which industrial protocol does not support VLANs? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. EtherCAT .
The study guide states that for industrial Ethernet protocols, "such as Ethernet/IP and Modbus/TCP, you can use VLANs to segment your physical LAN into multiple logical LANs." This directly confirms that Ethernet/IP and Modbus/TCP support VLAN-based segmentation in the OT context.
By contrast, the guide explains that "EtherCAT skips layers 3 to 6 to deliver real-time communication" and describes it as an "Open-Software Modified-Ethernet" approach. Because it does not operate like the standard Ethernet/IP model used for normal VLAN-based segmentation, EtherCAT is the protocol identified here as not supporting VLANs in the way Ethernet/IP and Modbus/TCP do.
So, based on the study guide comparison, the verified answer is EtherCAT .
NEW QUESTION # 29
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 30
......
The key trait of our product is that we keep pace with the changes of syllabus and the latest circumstance to revise and update our NSEI_OTS_AR-7.6 study materials, and we are available for one-year free updating to assure you of the reliability of our service. Our company has established a long-term partnership with those who have purchased our NSEI_OTS_AR-7.6 exam guides. We have made all efforts to update our product in order to help you deal with any change, making you confidently take part in the exam. We will inform you that the NSEI_OTS_AR-7.6 Study Materials should be updated and send you the latest version in a year after your payment. We will also provide some discount for your updating after a year if you are satisfied with our NSEI_OTS_AR-7.6 exam prepare.
Downloadable NSEI_OTS_AR-7.6 PDF: https://www.passtestking.com/Fortinet/NSEI_OTS_AR-7.6-practice-exam-dumps.html
BONUS!!! Download part of PassTestking NSEI_OTS_AR-7.6 dumps for free: https://drive.google.com/open?id=1IVFhQhD64edbYeuQl1Y_wF85Rxg9Z4dS