Vce H35-581_V2.0 Download & Reliable H35-581_V2.0 Test Syllabus

Our 2Pass4sure's H35-581_V2.0 exam training materials are mainly downloaded in PDF and software. We will regularly update, and will always provide the latest and the most accurate Huawei H35-581_V2.0 exam authentication information. With efforts for many years, the passing rate of our H35-581_V2.0 Exam has reached as high as 100%. If you have any concerns, you can try our H35-581_V2.0 pdf free demo and answers on probation first, and then make a decision whether to choose our H35-581_V2.0 dumps or not.

Huawei H35-581_V2.0 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: 5G Radio Network Planning Fundamentals20%- Radio Propagation and Coverage Principles
  • 1. Link Budget Analysis
  • 2. Coverage Estimation
  • 3. Propagation Models
- 5G Network Architecture and Interfaces
  • 1. 5G Core and RAN Components
  • 2. 5G SA and NSA Architectures
  • 3. 5G Network Protocols and Interfaces
Topic 2: 5G Network Optimization35%- Mobility and Capacity Optimization
  • 1. Parameter Tuning
  • 2. Handover Optimization
  • 3. Load Balancing
- Coverage Optimization
  • 1. Coverage Enhancement Methods
  • 2. Interference Analysis and Mitigation
  • 3. Coverage Problem Identification
- Performance Analysis
  • 1. Network Quality Evaluation
  • 2. KPI Analysis
  • 3. Performance Monitoring
Topic 3: 5G Network Planning and Design30%- Coverage Planning
  • 1. Macro Site Planning
  • 2. Indoor Coverage Design
  • 3. Massive MIMO Deployment
- Site Engineering
  • 1. Site Survey
  • 2. Transmission Planning
  • 3. Antenna Configuration
- Capacity Planning
  • 1. Spectrum Utilization Planning
  • 2. Capacity Dimensioning
  • 3. Traffic Forecasting
Topic 4: 5G Network Testing and Troubleshooting15%- Fault Analysis
  • 1. Coverage Fault Diagnosis
  • 2. Performance Issue Troubleshooting
  • 3. Optimization Case Analysis
- Testing Methods
  • 1. Network Benchmarking
  • 2. CQT Testing
  • 3. Drive Test Analysis

>> Vce H35-581_V2.0 Download <<

Reliable H35-581_V2.0 Test Syllabus | H35-581_V2.0 Reliable Practice Questions

H35-581_V2.0 test questions have so many advantages that basically meet all the requirements of the user. If you have good comments or suggestions during the trial period, you can also give us feedback in a timely manner. Our study materials will give you a benefit as Thanks, we do it all for the benefits of the user. H35-581_V2.0 Study Materials look forward to your joining in.

Huawei HCIP-5G-RNP&RNO V2.0 Sample Questions (Q44-Q49):

NEW QUESTION # 44
Which TA offsets may be configured for a 5G network operating in n41?
Select All that Apply

Answer: B,C

Explanation:
Options B and C are correct because the standardized Timing Advance (TA) offset values applicable to an NR Frequency Range 1 (FR1) Time Division Duplex (TDD) deployment include 25600 T_c and 39936 T_c, depending on the coexistence scenario.
NR band n41 operates in FR1 using TDD.
Timing Advance enables the UE to adjust uplink transmission timing so that signals from different UEs arrive at the gNodeB within the required timing alignment.
In NR, the effective uplink timing relationship includes a timing-advance offset represented by N_TA,offset.
According to the standardized timing requirements:
Option B - 25600 T_c: This value applies to FR1 TDD operation without the relevant LTE-NR coexistence requirements. It is also the default FR1 offset in applicable configurations when no explicit n- TimingAdvanceOffset is provided.
Option C - 39936 T_c: This value applies to FR1 TDD operation involving LTE-NR coexistence.
Option A - 0 T_c: This value is associated with the specified FR1 FDD coexistence case, not the normal n41 TDD configurations represented by this question.
Option D - 51200 T_c: This is not one of the applicable standardized NR timing-advance offset values.
Therefore, B and C are correct.
Official Reference: 3GPP TS 38.533, Section 4.4.1.0.1, Table 4.4.1.0.1-2, Timing Advance Offset Values ; TS 38.213, Section 4.2, Transmission Timing Adjustments .


NEW QUESTION # 45
Which of the following statements correctly compare LTE PCI with NR PCI?

Answer: B


NEW QUESTION # 46
Which of the following parameters determines the PRACH time-domain position?

Answer: A

Explanation:
The PRACH configuration index determines the time-domain opportunities available for Physical Random Access Channel (PRACH) preamble transmission.
PRACH is used during initial network access, applicable mobility procedures, and other operations requiring uplink synchronization or random-access signaling.
In NR, random-access occasions must be configured so that the UE knows when and where it is permitted to transmit a PRACH preamble.
The prach-ConfigurationIndex parameter identifies an entry in the standardized random-access configuration tables.
These tables specify characteristics including the PRACH preamble format, applicable system-frame periodicity, subframe or slot location, starting symbol, and number of time-domain PRACH occasions.
The remaining parameters control different aspects of random access.
Option A - Logic root sequence: The logical root sequence index determines the Zadoff-Chu root sequence used for PRACH preamble generation.
Option B - Frequency offset: The frequency-domain configuration determines the placement of PRACH resources within the available uplink bandwidth.
Option C - Ncs: The cyclic-shift parameter determines the cyclic-shift spacing used to generate different preamble sequences from a common root sequence.
These parameters affect PRACH sequence generation or frequency-domain placement, rather than identifying its scheduling opportunities in time.
Therefore, option D is correct.
Official Reference: 3GPP TS 38.211, Section 6.3.3.2, PRACH Mapping to Physical Resources , Tables
6.3.3.2-2 through 6.3.3.2-4.


NEW QUESTION # 47
Which of the following messages includes the reselection timer used for 5G-to-4G reselection?

Answer: D

Explanation:
System Information Block 5 (SIB5) contains the inter-Radio Access Technology (inter-RAT) cell-reselection parameters required when a UE evaluates a transition from 5G NR to LTE E-UTRA.
In NR, cell reselection is performed primarily while the UE operates in RRC_IDLE or RRC_INACTIVE.
The UE evaluates serving-cell and neighboring-cell measurements according to broadcast frequency priorities, signal-level thresholds, and applicable reselection timers.
SIB5 provides information about E-UTRA carrier frequencies and their associated reselection parameters.
A particularly important parameter is t-ReselectionEUTRA , which specifies the timer associated with inter- RAT reselection toward LTE.
The UE applies this parameter when determining whether the configured reselection conditions have remained satisfied for the required duration.
This mechanism helps prevent excessive movement between NR and LTE cells caused by short-term radio- signal fluctuations.
SIB5 can also contain E-UTRA carrier-frequency lists, reselection priorities, signal thresholds, and speed- dependent reselection scaling factors.
The other listed SIBs are not responsible for carrying the standard NR-to-E-UTRA reselection timer.
Consequently, SIB5 is the correct answer because its information elements explicitly include the E-UTRA reselection configuration.
Official Reference: 3GPP TS 38.331, Section 6.3.1, SIB5 Information Element ; TS 38.304, Cell Reselection Procedures .


NEW QUESTION # 48
Which scenario requires a measurement-based SCG addition but does not allow blind SCG addition?

Answer: A

Explanation:
Periodic Secondary Cell Group (SCG) addition after network access is the intended answer because the Huawei NSA procedure described in the material requires measurement-based SCG addition for subsequent periodic additions.
In E-UTRA-NR Dual Connectivity (EN-DC), the LTE eNodeB operates as the Master Node (MeNB), while the NR gNodeB operates as the Secondary Node (SgNB).
SCG addition allows the network to establish NR connectivity for a UE already connected to the LTE master network.
Huawei's implementation distinguishes measurement-based SCG addition from blind SCG addition.
In measurement-based addition, the MeNB configures the UE to measure neighboring NR cells. The UE reports eligible NR measurements, commonly through a B1 measurement-reporting procedure, enabling the network to select an appropriate NR secondary cell.
Blind addition does not require a fresh qualifying measurement report before initiating the corresponding addition attempt.
According to the supplied implementation description, blind addition is restricted to initial addition scenarios, including initial access, incoming handover, and incoming RRC connection reestablishment.
Periodic addition occurs after the initial addition opportunity and therefore requires measurement-based selection under this configuration.
Consequently, option C is the intended answer.
Official Reference: 3GPP TS 37.340, E-UTRA and NR Multi-Connectivity , topic Secondary Node Addition and Modification Procedures .


NEW QUESTION # 49
......

Now there are many IT professionals in the world and the competition of IT industry is very fierce. So many IT professionals will choose to participate in the IT certification exam to improve their position in the IT industry. H35-581_V2.0 Exam is a very important Huawei's certification exam. But if you want to get a Huawei certification, you must pass the exam.

Reliable H35-581_V2.0 Test Syllabus: https://www.2pass4sure.com/HCIP-5G-RNP-RNO/H35-581_V2.0-actual-exam-braindumps.html