Free 300-420 Practice | Excellect 300-420 Pass Rate

2026 Latest PracticeVCE 300-420 PDF Dumps and 300-420 Exam Engine Free Share: https://drive.google.com/open?id=1EaVzpdIsL3tkDkwYV00ug1lc6VuWecco

The PracticeVCE is also committed to ace the Cisco 300-420 exam preparation journey and enable you to get success in the final Designing Cisco Enterprise Networks 300-420 exam. To achieve this objective the PracticeVCE is offering real, updated, and error-free Designing Cisco Enterprise Networks 300-420 Dumps in three easy-to-use and compatible formats. These formats are 300-420 PDF dumps files, desktop PracticeVCE 300-420 practice exam software, and web-based 300-420 practice test software.

Cisco 300-420 Exam Syllabus Topics:

Section	Weight	Objectives
WAN for Enterprise Networks	20%	- Design SD-WAN solution - Design WAN connectivity - Design QoS for WAN
Services	10%	- Design network management - Design end-to-end QoS policy
Advanced Addressing and Routing Solutions	25%	- Create stable, secure, and scalable routing designs for Layer 3 - Determine IPv6 migration strategy - Create structured addressing designs
Enterprise Campus Security	20%	- Design network security - Design network access control
Advanced Enterprise Campus Networks	25%	- Design campus network services (QoS, multicast, etc.) - Design Layer 2 and Layer 3 campus networks - Design for high availability

>> Free 300-420 Practice <<

Excellect 300-420 Pass Rate, 300-420 Braindumps

Passing the Cisco 300-420 certification exam is necessary for professional development, and employing real Cisco 300-420 Exam Dumps can assist applicants in reaching their professional goals. These actual 300-420 questions assist students in discovering areas in which they need improvement, boost confidence, and lower anxiety. Candidates will breeze through Cisco 300-420 Certification examination with flying colors and advance to the next level of their jobs if they prepare with updated Cisco 300-420 exam questions.

Cisco Designing Cisco Enterprise Networks Sample Questions (Q168-Q173):

NEW QUESTION # 168
Which two BGP features will result in successful route exchanges between eBGP neighbors sharing the same AS number? (Choose two.)

A. as-override
B. allow-as-in
C. advertise-best-external
D. client-to-client reflection
E. bestpath as-path ignore

Answer: A,B

Explanation:
Explanation

NEW QUESTION # 169
Drag and drop the properties from the left onto the protocols they describe on the right.

Answer:

Explanation:

NEW QUESTION # 170
Refer to the exhibit. An engineer must design an automatic failover solution. The solution should allow HSRP to detect a WAN 1 failure and initiate an automatic failover, making router R2 the active HSRP router. Which two solutions should the engineer choose? (Choose two.)

A. use IP source routing
B. use a floating static route
C. Implement Enhanced Object Tracking on roster R1
D. Implement PBR on router R1
E. Implement IP SLA on router R1

Answer: C,E

NEW QUESTION # 171
Refer to the exhibit.

Which solution decreases the EIGRP convergence time?

A. Increase the hold time value
B. Enable stub routing on the spokes
C. Increase the dead timer value
D. Enable subsecond timers

Answer: B

Explanation:
Enabling EIGRP stub routing on the spokes decreases convergence time in a hub-and-spoke design by reducing unnecessary queries and preventing spokes from being treated as transit routers. EIGRP convergence can be delayed when a router loses a route and must query many neighbors to determine whether an alternate path exists. In remote-site or spoke designs, a spoke normally has no useful alternate path for networks beyond itself, so querying it wastes time and can contribute to stuck-in-active conditions. Cisco EIGRP stub routing allows the spoke to advertise only permitted route types and informs upstream routers not to query the spoke for routes outside its scope. This creates a cleaner query boundary and accelerates convergence after link or route failures. Subsecond timers can detect neighbor loss more quickly, but they do not address the broader EIGRP query behavior shown in the design. Increasing hold or dead timers would slow detection, not improve convergence. Therefore, in the displayed hub-and-spoke EIGRP design, enabling stub routing on the spokes is the correct solution to decrease convergence time.

NEW QUESTION # 172
An architect must create a QoS solution for a customer to ensure that a 40 Mbps Internet connection is shared between four subnets based on these requirements:
* Each subnet must receive no less than 10 Mbps of download bandwidth during peak traffic times.
* A subnet can use up to 40 Mbps during nonpeak traffic times if the other subnets are idle.
* Download traffic must never experience a delay.
Which solution must the architect choose?

A. bandwidth percentage and policing
B. shaping and policing
C. bandwidth percentage and rate-limiting
D. rate-limiting and shaping

Answer: C

Explanation:
Selected answer: B
"Download traffic must never experience a delay."
This means we shouldn't be using Shaping at any point (since that puts packets into a buffer and sends them out later on when congestion has been reduced) Also: "Rate-limiting" is a bigger term and under it we have 2 things: "Policing" and "Shaping"

NEW QUESTION # 173
......

If you are preparing for 300-420 exam and upset without accurate exam torrent and practice materials, PracticeVCE guarantees you to pass exam at first attempt absolutely. Our 300-420 exam torrent is edited by latest official examination knowledge. Once official department change questions we will release new version of 300-420 Exam Torrent accordingly. We provide one year free update and service warranty for all products. You will have sufficient time to take part in exams.

Excellect 300-420 Pass Rate: https://www.practicevce.com/Cisco/300-420-practice-exam-dumps.html

2026 Latest PracticeVCE 300-420 PDF Dumps and 300-420 Exam Engine Free Share: https://drive.google.com/open?id=1EaVzpdIsL3tkDkwYV00ug1lc6VuWecco