P.S. Free 2026 Juniper JN0-351 dumps are available on Google Drive shared by CertkingdomPDF: https://drive.google.com/open?id=17RY1JLl79YkB_hpstv1BseCGknaBb46J
CertkingdomPDF addresses this issue by offering real Juniper JN0-351 Questions. CertkingdomPDF's team of professionals worked tirelessly to create the JN0-351 questions, ensuring that applicants have access to the most recent and genuine JN0-351 Exam Questions. With CertkingdomPDF's help, you can pass the JN0-351 exam on your first attempt or claim a refund according to certain terms and conditions.
| Section | Objectives |
|---|---|
| Tunneling Technologies | - IP tunneling
|
| High Availability | - Redundancy mechanisms
|
| Layer 2 Switching | - VLANs and trunking
|
| Layer 3 Routing Fundamentals | - Routing protocols
|
| Layer 2 Security | - Switch security features
|
Some people prefer books, some check videos, and some hire online tutors, to clear the JN0-351 exam. It all depends on you what you like the most. If you learn better by books, go for it but if you are busy, and don't have much time to consult a list of books for studying, itโs better to get the most probable Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam questions. We are sure that you will learn well and can crack Juniper JN0-351 exam easily.
NEW QUESTION # 44
Which two types of tunnels are able to be created on all Junos devices? (Choose two.)
Answer: C,D
Explanation:
GRE tunnels can be created on all Junos devices. GRE is a tunneling protocol that encapsulates a wide variety of network layer protocols inside virtual point-to-point links.
IP-IP tunnels can also be created on all Junos devices. IP-IP tunneling is used to encapsulate IP packets within IP packets, providing a simple way to tunnel IP traffic.
NEW QUESTION # 45
You are asked to create a new firewall filter to evaluate Layer 3 traffic that is being sent between VLANs. In this scenario, which two statements are correct? (Choose two.)
Answer: A,B
Explanation:
Explanation
A firewall filter is a configuration that defines the rules that determine whether to forward or discard packets at specific processing points in the packet flow. A firewall filter can also modify the attributes of the packets, such as priority, marking, or logging. A firewall filter can be applied to various interfaces, protocols, or routing instances on a Juniper device1.
A firewall filter has a family attribute, which specifies the type of traffic that the filter can evaluate. The family attribute can be one of the following: inet, inet6, mpls, vpls, iso, or ethernet-switching2. The family inet firewall filter is used to evaluate IPv4 traffic, which is the most common type of Layer 3 traffic on a network.
To create a family inet firewall filter, you need to specify the appropriate match criteria and actions for each term in the filter. The match criteria can include various fields in the IPv4 header, such as source address, destination address, protocol, port number, or DSCP value. The actions can include accept, discard, reject, count, log, policer, or next term3.
To apply a firewall filter to Layer 3 traffic that is being sent between VLANs, you need to apply the filter to the appropriate IRB interface. An IRB interface is an integrated routing and bridging interface that provides Layer 3 functionality for a VLAN on a Juniper device. An IRB interface has an IP address that acts as the default gateway for the hosts in the VLAN. An IRB interface can also participate in routing protocols and forward packets to other VLANs or networks4.
Therefore, option C is correct, because you should create a family inet firewall filter with the appropriate match criteria and actions. Option D is correct, because you should apply the firewall filter to the appropriate IRB interface.
Option A is incorrect, because you should not create a family ethernet-switching firewall filter with the appropriate match criteria and actions. A family ethernet-switching firewall filter is used to evaluate Layer 2 traffic on a Juniper device. A family ethernet-switching firewall filter can only match on MAC addresses or VLAN IDs, not on IP addresses or protocols5.
Option B is incorrect, because you should not apply the firewall filter to the appropriate VLAN. A VLAN is a logical grouping of hosts that share the same broadcast domain on a Layer 2 network. A VLAN does not have an IP address or routing capability. A firewall filter cannot be applied directly to a VLAN; it must be applied to an interface that belongs to or connects to the VLAN6.
References:
1: Firewall Filters Overview 2: Configuring Firewall Filters 3: Configuring Firewall Filter Match Conditions and Actions 4: Understanding Integrated Routing and Bridging Interfaces 5: Configuring Ethernet-Switching Firewall Filters 6: Understanding VLANs
NEW QUESTION # 46
Which two statements are correct about tunnels? (Choose two.)
Answer: C,D
Explanation:
A tunnel is a connection between two computer networks, in which data is sent from one network to another through an encrypted link. Tunnels are commonly used to secure data communications between two networks or to connect two networks that use different protocols.
Option B is correct, because tunnel endpoints must have a valid route to the remote tunnel endpoint. A tunnel endpoint is the device that initiates or terminates a tunnel connection. For a tunnel to be established, both endpoints must be able to reach each other over the underlying network. This means that they must have a valid route to the IP address of the remote endpoint 1 .
Option D is correct, because tunnels add additional overhead to packet size. Tunnels work by encapsulating packets: wrapping packets inside of other packets. This means that the original packet becomes the payload of the surrounding packet, and the surrounding packet has its own header and trailer. The header and trailer of the surrounding packet add extra bytes to the packet size, which is called overhead. Overhead can reduce the efficiency and performance of a network, as it consumes more bandwidth and processing power 2 .
Option A is incorrect, because BFD can be used to monitor tunnels. BFD is a protocol that can be used to quickly detect failures in the forwarding path between two adjacent routers or switches. BFD can be integrated with various routing protocols and link aggregation protocols to provide faster convergence and fault recovery. BFD can also be used to monitor the connectivity of tunnels, such as GRE, IPsec, or MPLS.
Option C is incorrect, because IP-IP tunnels are stateless. IP-IP tunnels are a type of tunnels that use IP as both the encapsulating and encapsulated protocol. IP-IP tunnels are simple and easy to configure, but they do not provide any security or authentication features. IP-IP tunnels are stateless, which means that they do not keep track of the state or status of the tunnel connection. Stateless tunnels do not require any signaling or negotiation between the endpoints, but they also do not provide any error detection or recovery mechanisms.
References:
1 : What is Tunneling? | Tunneling in Networking 2 : What Is Tunnel In Networking, Its Types, And Its Benefits? : [Configuring Bidirectional Forwarding Detection] : [IP-IP Tunneling]
NEW QUESTION # 47
Exhibit
You have configured a GRE tunnel. To reduce the risk of dropping traffic, you have configured a keepalive OAM probe to monitor the state of the tunnel; however, traffic drops are still occurring.
Referring to the exhibit, what is the problem?
Answer: B
Explanation:
A keepalive OAM probe is a mechanism that can be used to monitor the state of a GRE tunnel and detect any failures in the tunnel path. A keepalive OAM probe consists of sending periodic packets from one end of the tunnel to the other and expecting a reply. If no reply is received within a specified time, the tunnel is considered down and the line protocol of the tunnel interface is changed to down 1 .
To configure a keepalive OAM probe for a GRE tunnel, you need to specify two parameters: the keepalive- time and the hold-time. The keepalive-time is the interval between each keepalive packet sent by the local router. The hold-time is the maximum time that the local router waits for a reply from the remote router before declaring the tunnel down 2 .
According to the Juniper Networks documentation, the hold-time value must be two times the keepalive-time value for a GRE tunnel 2 . This is because the hold-time value must account for both the round-trip time of the keepalive packet and the processing time of the remote router. If the hold-time value is too small, it may cause false positives and unnecessary tunnel flaps.
In the exhibit, the configuration shows that the keepalive-time is set to 10 seconds and the hold-time is set to
15 seconds for the gr-1/1/10.1 interface. This means that the local router will send a keepalive packet every 10 seconds and will wait for 15 seconds for a reply from the remote router. However, this hold-time value is not two times the keepalive-time value, which violates the recommended configuration. This may cause traffic drops if the remote router takes longer than 15 seconds to reply.
Therefore, option D is correct, because the hold-time value must be two times the keepalive-time value for a GRE tunnel. Option A is incorrect, because BFD is not required for GRE tunnels; BFD is another protocol that can be used to monitor tunnels, but it is not compatible with GRE keepalives 3 . Option B is incorrect, because the "event link-adjacency-loss" option is not related to GRE tunnels; it is an option that can be used to trigger an action when a link goes down 4 . Option C is incorrect, because LLDP does not need to be removed from the gr-1/1/10.1 interface; LLDP is a protocol that can be used to discover neighboring devices and their capabilities, but it does not interfere with GRE tunnels 5 .
References:
1 : Configuring Keepalive Time and Hold time for a GRE Tunnel Interface 2 : keepalive | Junos OS | Juniper Networks 3 : Configuring Bidirectional Forwarding Detection 4 : event link-adjacency-loss | Junos OS | Juniper Networks 5 : Understanding Link Layer Discovery Protocol
NEW QUESTION # 48
What is a purpose of using a spanning tree protocol?
Answer: B
Explanation:
A broadcast storm is a network condition where a large number of broadcast packets are sent and received by multiple devices, causing congestion and performance degradation1. A broadcast storm can occur when there are loops in the network topology, meaning that there are multiple paths between two devices2.
A spanning tree protocol is a network protocol that prevents loops from being formed when switches or bridges are interconnected via multiple paths. It does this by creating a logical tree structure that spans all the devices in the network, and disabling or blocking the links that are not part of the tree, leaving a single active path between any two devices3.
By eliminating loops, a spanning tree protocol also eliminates broadcast storms, as broadcast packets will not be forwarded endlessly along the looped paths. Instead, broadcast packets will be sent only along the tree structure, reaching each device once and avoiding congestion3.
NEW QUESTION # 49
......
By seeing your goofs you can work on your show continually for the Juniper JN0-351 approach. You can give vast phony tests to make them ideal for Juniper JN0-351 and can check their past given exams. Juniper JN0-351 Dumps will give reliable free updates to our clients generally all the Enterprise Routing and Switching, Specialist (JNCIS-ENT).
Online JN0-351 Bootcamps: https://www.certkingdompdf.com/JN0-351-latest-certkingdom-dumps.html
P.S. Free 2026 Juniper JN0-351 dumps are available on Google Drive shared by CertkingdomPDF: https://drive.google.com/open?id=17RY1JLl79YkB_hpstv1BseCGknaBb46J