For this task, you need to update Versa Networks VNX301 preparation material to get success. If applicants fail to find reliable material, they fail the Versa Networks VNX301 examination. Failure leads to loss of money and time. You just need to rely on Dumpleader to avoid these losses. Dumpleader has launched three formats of real Versa Networks VNX301 Exam Dumps.
| Certification Vendor: | Versa Networks |
|---|---|
| Exam Name: | Versa Certified SD-WAN Specialist |
| Exam Number: | VNX301 |
| Available Languages: | English |
| Exam Price: | USD 250 |
| Certificate Validity Period: | 3 years |
| Related Certifications: | Versa Certified SD-WAN Expert |
| Passing Score: | 70% |
| Exam Format: | Multiple Select, Multiple Choice |
| Real Exam Qty: | 60 |
| Exam Duration: | 90 minutes |
| Sample Questions: | Versa Networks VNX301 Sample Questions |
| Exam Way: | Online proctored exam at Pearson VUE test centers |
| Pre Condition: | Recommended: Basic networking knowledge (CCNA/equivalent), familiarity with WAN technologies and enterprise network design |
| Official Syllabus URL: | https://www.versa-networks.com/partners/training-certification.html |
>> VNX301 Valid Dumps Sheet <<
The go-to resource for effective and efficient Versa Networks exam preparation is Dumpleader Versa Networks VNX301 practice material in three formats. Our updated Versa Networks questions are available in these three different formats: web-based practice test, desktop practice exam software, and Versa Networks PDF file of real exam questions. The goal of these formats is to aid test candidates in preparing for the Versa Networks VNX301 test according their styles.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 41
Examine the exhibit below.
As an administrator of a Versa Secure SD-WAN, you are asked to find the current bandwidth of each WAN circuit used for SD-WAN connectivity in a branch, but the Director is not displaying any information for the WAN circuits.
In this scenario, what should be done to get the graph populated for all WAN circuits?
Answer: B
Explanation:
The correct answer is B . The exhibit shows the branch interface summary in Versa Director with a Live Data column. To populate real-time bandwidth graphs for WAN circuits, the administrator must select Live Data for the WAN interfaces that need to be monitored. Versa monitoring documentation states that, from a Director node, you can monitor VOS devices and organizations, and that Director, together with Versa Analytics, can poll VOS devices in real time to understand what is happening on the devices. This real-time information can be displayed to assist with troubleshooting.
Because the question asks for the current bandwidth of each WAN circuit, historical analytics alone is not sufficient. The dashboard must poll live statistics from the selected WAN circuits. In the exhibit, not all WAN interfaces appear to have Live Data selected; therefore, the graph is not populated for all circuits. Refreshing the page does not enable polling and will not solve the missing data condition.
Selecting only MPLS would populate only the MPLS circuit, not all WAN circuits. Unselecting and reselecting only the INET circuit would affect only that one interface. Therefore, Live Data must be selected for all WAN circuits whose current bandwidth should be displayed.
NEW QUESTION # 42
Examine the exhibit below.
An SD-WAN administrator has configured Direct Internet Access (DIA) for INET and INET-2 and wants to use SaaS Application Monitoring and SD-WAN policies to steer certain applications to the best Internet path on a certain VOS device.
Which two statements are true regarding the configuration shown in the exhibit? (Choose two.)
Answer: B,C
Explanation:
The correct answers are B and D . In the exhibit, the Next-Hop Selection Method is configured as Load Balance , and both INET and INET-2 have the same next-hop priority value of 1 . Versa SD-WAN guidance states that load balancing between WAN paths is achieved by configuring at least two circuits with equal priority. Therefore, when both INET and INET-2 satisfy the SLA requirements, sessions can be load-balanced across those two internet circuits.
Option D is also correct because the exhibit shows SLA Violation Action: Forward . This means that if no next hop is SLA-compliant, the VOS device is still allowed to forward traffic instead of dropping it. This behavior is consistent with Versa SD-WAN traffic-steering concepts, where forwarding profiles define circuit or path priorities, connection methods, load-balancing behavior, and SLA handling for traffic that matches an SD-WAN policy.
Option A is incorrect because the exhibit does not use the Automatic next-hop selection method. Versa' s performance-based SaaS optimization uses monitoring metrics to select the best path when configured for automatic/performance-based selection, but this exhibit shows Load Balance instead. Option C is not the best answer because LTE has lower priority 2 and would be considered only after the higher- priority INET and INET-2 paths are unavailable or unusable, not merely when one INET circuit fails.
NEW QUESTION # 43
A customer reports inconsistent application performance between two branches. You find that traffic is transmitted over the Internet circuit but returns over the MPLS circuit. Which CLI output field pair is most useful to confirm this asymmetry?
Answer: C
Explanation:
The correct answer is B . Versa documentation describes checking for asymmetrical SD-WAN paths when troubleshooting bandwidth and throughput issues. It gives the example of traffic being transmitted on one transport network and returning on another transport network that has different bandwidth. To check whether traffic is traversing an asymmetrical SD-WAN path, Versa recommends using show orgs org organization- name sessions sdwan brief.
In that output, the key fields are RX WAN CKT and TX WAN CKT . If the SD-WAN paths are symmetrical, the circuits shown in the RX and TX WAN circuit fields must be the same on the local and remote sites. If traffic goes out over Internet and returns over MPLS, throughput may differ depending on the bandwidth and quality of each circuit.
Source and destination zones are security-policy concepts, while BGP local preference and MED are routing attributes. Tenant ID and VSN ID identify context, but they do not directly prove directional WAN-circuit asymmetry.
NEW QUESTION # 44
A branch has correct underlay speed and no asymmetric SD-WAN paths, but users still report packet loss during large transfers. You suspect QoS shaping is dropping traffic. Which command is most appropriate to verify interface-level CoS drops?
Answer: D
Explanation:
The correct answer is A . Versa throughput troubleshooting documentation includes a specific section titled Check that Packets Are not Dropped by CoS . It states that if a CoS shaper or rate limiter is configured on the VOS device, it may drop packets when traffic exceeds the configured shaping rate. To check whether CoS is dropping packets, Versa recommends commands including show class-of-services interfaces brief and show class-of-services interfaces detail interface-name.
The detailed interface output displays traffic statistics such as TX packets, TX packets dropped, TX bytes, TX bytes dropped, and per-traffic-class drops. This is exactly the evidence needed to confirm whether shaping or QoS enforcement is causing the observed loss.
show alarms last-n 10 may reveal major events but will not provide per-interface CoS drop counters.
show system uptime only indicates how long the system has been running. show cgnat tenants is relevant for NAT state and tenant CGNAT resources, not QoS drops.
NEW QUESTION # 45
You configured a Versa speed-test server on a VOS device, but the client cannot start the bandwidth test. A firewall exists between the client and server. Which port must be allowed through the firewall?
Answer: A
Explanation:
The correct answer is A . Versa link-bandwidth troubleshooting documentation explains that a VOS device can be configured as a Versa speed-test client, a Versa speed-test server, or both simultaneously. After the server is configured, the client starts the test by initiating a TCP-based connection toward the speed-test server. The server listens on port 5201 . The documentation includes an explicit note that if the VOS device is behind a firewall, port 5201 must be open .
This is different from the SD-WAN overlay data path, which commonly uses UDP-based transport encapsulation, and different from internet speed-test traffic, which uses other ports depending on the specific test type. In this scenario, the question states that a Versa speed-test server was configured, so the relevant requirement is TCP 5201 reachability from the client to the server.
TCP 443 may be used for management or web access, UDP 4790 is associated with SD-WAN transport encapsulation, and UDP 53 is DNS. None of those replace TCP 5201 for Versa speed-test server operation.
NEW QUESTION # 46
......
VNX301 Online Training Materials: https://www.dumpleader.com/VNX301_exam.html