BTW, DOWNLOAD part of ExamCost NSE4_FGT_AD-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1segUJl92wQuVa87uQRV7xXIvxMNtfV1L
The high quality and high efficiency of our NSE4_FGT_AD-7.6 exam materials has helped many people pass exams quickly. After they get a NSE4_FGT_AD-7.6 certificate, they now have more job opportunities. And you can just look at the feedbacks from our worthy customrs on the website thanking for our NSE4_FGT_AD-7.6 learning guide. The current situation is very serious. Selecting our NSE4_FGT_AD-7.6 training guide is your best decision.
| Section | Weight | Objectives |
|---|---|---|
| SD-WAN | 10% | - SD-WAN configuration using security profiles - Performance SLA monitoring - SD-WAN components and benefits |
| Network Security | 20% | - Intrusion prevention system (IPS) - Application control - Antivirus scanning - Packet flow and inspection - DNS filtering - URL filtering |
| High Availability (HA) | 10% | - HA modes and configuration - Failover behavior and troubleshooting - Heartbeat and synchronization |
| Firewall Policies and NAT | 25% | - Policy concepts and types - Policy troubleshooting - IPv4 and IPv6 policies - NAT and PAT configuration - Virtual IP (VIP) and DNAT |
| FortiGate Fundamentals | 15% | - FortiOS operation modes (NAT/Transparent) - FortiGate models and hardware architecture - Initial configuration and setup - Security Fabric overview - Dashboard and monitoring |
| VPN Configuration | 20% | - IPSec VPN site-to-site - SSL-VPN fundamentals and configuration - VPN troubleshooting - VPN concentrator |
>> Exam NSE4_FGT_AD-7.6 Question <<
Students are given a fixed amount of time to complete each test, thus Fortinet Exam Questions candidate's ability to control their time and finish the Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) exam in the allocated time is a crucial qualification. Obviously, this calls for lots of practice. Taking ExamCost NSE4_FGT_AD-7.6 Practice Exam helps you get familiar with the Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) exam questions and work on your time management skills in preparation for the real Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) exam.
NEW QUESTION # 64
Refer to the exhibits.
An administrator has observed the performance status outputs on an HA cluster for 55 seconds.
Which FortiGate is the primary?
Answer: B
Explanation:
From the HA configuration shown for HQ-NGFW-1:
set memory-based-failover enable
set memory-failover-threshold 70
set memory-failover-monitor-period 50
set memory-failover-sample-rate 10
set memory-failover-flip-timeout 60
set override disable
set priority 200
From the performance status outputs:
HQ-NGFW-1 memory used is 90% (well above the configured threshold of 70%) HQ-NGFW-2 memory used is about 48.7% (well below the threshold) What happens in FortiOS 7.6 with memory-based failover When memory-based failover is enabled, FortiGate monitors memory utilization. If the unit's memory usage stays above the configured memory-failover-threshold for the configured memory-failover-monitor-period, the cluster triggers a failover away from the unit under memory pressure.
Threshold = 70%
HQ-NGFW-1 is at 90%, so it violates the threshold.
Monitor period = 50 seconds.
The administrator observed for 55 seconds, which is longer than 50 seconds, so the condition is met for long enough to trigger failover.
The memory-failover-flip-timeout 60 is used to prevent rapid back-and-forth role changes (flapping) after a failover decision; it does not prevent the initial failover from occurring once the threshold breach persists for the monitor period.
NEW QUESTION # 65
A new administrator is configuring FSSO authentication on FortiGate using DC Agent Mode. Which step is not part of the expected process?
Answer: C
NEW QUESTION # 66
Refer to the exhibit.
Why is the Antivirus scan switch grayed out when you are creating a new antivirus profile for FTP?
Answer: B
Explanation:
In FortiOS 7.6, the Antivirus scan master switch in an antivirus profile becomes available only after at least one supported protocol is enabled for inspection.
What the exhibit shows
A new antivirus profile named FTP_AV_Profile
Feature set: Flow-based
Antivirus scan switch is grayed out
All Inspected Protocols (HTTP, SMTP, POP3, IMAP, FTP, CIFS) are currently disabled Why the Antivirus scan switch is grayed out In FortiOS antivirus profiles:
The Antivirus scan toggle is a dependent control
It cannot be enabled unless at least one inspected protocol is selected This prevents enabling AV scanning when there is no traffic type to scan This behavior is documented in the FortiOS 7.6 Antivirus Profile configuration section.
Once you enable a protocol (for example, FTP), the Antivirus scan switch becomes active and configurable.
Why option B is correct
B). None of the inspected protocols are active in this profile.
All protocol toggles are OFF
Therefore, FortiGate disables (grays out) the Antivirus scan option
This is expected and correct behavior
Why the other options are incorrect
A). Antivirus scan is disabled under Feature visibilityIncorrect. Feature Visibility controls whether Antivirus appears in the GUI, not whether the scan switch is enabled inside a profile.
C). Feature set must be Proxy-basedIncorrect. Antivirus scanning is supported in both flow-based and proxy- based modes.
D). Less than 2 GB RAM does not support Antivirus scanIncorrect. Memory size affects performance and offloading, not basic AV scan availability.
NEW QUESTION # 67
Refer to the exhibit. Based on this partial configuration, what are the two possible outcomes when FortiGate enters conserve mode? (Choose two.)
Answer: A,C
Explanation:
System configuration cannot be changed because of the IPS Global configuration "fail-open enabled" FortiGate skips quarantine actions - again because of the IPS Global configuration "fail-open enabled"
NEW QUESTION # 68
Refer to the exhibit.
An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?
Answer: A
Explanation:
In FortiOS 7.6 Application Control, security logs are generated primarily for actions such as Block or Monitor, not for Allow actions.
What is happening in the exhibit
An Application Override is configured for ABC.Com
Type: Application
Action: Allow
The application control profile is applied to a firewall policy
Logging is enabled on the firewall policy
Traffic to ABC.Com is successfully allowed
However, no security logs appear for ABC.Com.
Why no logs are generated
In FortiOS 7.6:
Application Control logs are written to Security Logs when:
An application is Blocked
An application is Monitored
When an application action is set to Allow:
The traffic is permitted silently
No application control security log is generated
Even if policy logging is enabled
This is expected and documented behavior.
To generate logs for allowed applications, the action must be set to Monitor, not Allow.
Why the other options are incorrect
A). ABC.Com is hitting the category Excessive-BandwidthIncorrect. ABC.Com has a higher-priority explicit override (priority 1), so it is not evaluated against the Excessive-Bandwidth filter.
B). The ABC.Com Type is set as Application instead of FilterIncorrect. Application-type overrides are valid and commonly used; this does not suppress logging.
C). The ABC.Com must be configured as a web filter profileIncorrect. This traffic is being evaluated by Application Control, not Web Filter.
NEW QUESTION # 69
......
Please believe that our company is very professional in the research field of the NSE4_FGT_AD-7.6 training questions, which can be illustrated by the high passing rate of the examination. Despite being excellent in other areas, we have always believed that quality and efficiency should be the first of our NSE4_FGT_AD-7.6 Real Exam. For our NSE4_FGT_AD-7.6 study materials, the high passing rate as 98% to 100% is the best test for quality and efficiency.
NSE4_FGT_AD-7.6 Vce Exam: https://www.examcost.com/NSE4_FGT_AD-7.6-practice-exam.html
DOWNLOAD the newest ExamCost NSE4_FGT_AD-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1segUJl92wQuVa87uQRV7xXIvxMNtfV1L