Complete NGFW-Engineer Exam Dumps, Latest NGFW-Engineer Dumps

P.S. Free & New NGFW-Engineer dumps are available on Google Drive shared by VCE4Dumps: https://drive.google.com/open?id=1pGIgliTgf4p3pvBNMo-sVqjUem-SNgA9

Our NGFW-Engineer practice materials enjoy a very high reputation worldwide. This is not only because our practical materials are affordable, but more importantly, our NGFW-Engineer practice materials are carefully crafted after years of hard work and the quality is trustworthy. If you are still anxious about getting a certificate, why not try our NGFW-Engineer practice materials? If you have any questions about our practical materials, you can ask our staff who will give you help.

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

TopicDetails
Topic 1
  • PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.
Topic 2
  • PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active
  • active and active
  • passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.
Topic 3
  • Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.

>> Complete NGFW-Engineer Exam Dumps <<

NGFW-Engineer - Palo Alto Networks Next-Generation Firewall Engineer –High-quality Complete Exam Dumps

According to personal propensity and various understanding level of exam candidates, we have three versions of NGFW-Engineer practice materials for your reference. Here are the respective features and detailed disparities of our NGFW-Engineer practice materials. Pdf version- it is legible to read and remember, and support customers’ printing request, so you can have a print and practice in papers. Software version-It support simulation test system, and times of setup has no restriction. Remember this version support Windows system users only. App online version-Be suitable to all kinds of equipment or digital devices. Be supportive to offline exercise on the condition that you practice it without mobile data.

Palo Alto Networks Next-Generation Firewall Engineer Sample Questions (Q87-Q92):

NEW QUESTION # 87
After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish. Which of the following actions will resolve this issue?

Answer: C

Explanation:
The Proxy IDs (or Traffic Selectors) define the local and remote subnets that are allowed to communicate over the IPSec tunnel. If the Proxy IDs on the Palo Alto Networks firewall do not match the configuration on the Cisco ASA, the tunnel will fail to establish because the firewalls won't agree on which traffic to encrypt. Ensuring that the Proxy IDs match between the Palo Alto Networks firewall and the Cisco ASA will resolve the issue.


NEW QUESTION # 88
Which two statements apply to configuring required security rules when setting up an IPSec tunnel between a Palo Alto Networks firewall and a third- party gateway? (Choose two.)

Answer: A,C

Explanation:
In the Palo Alto Networks architecture, establishing a site-to-site VPN requires a clear understanding of how the Security Policy engine interacts with different traffic flows. According to technical documentation (Step 7 of the IPSec configuration guide), there are two distinct categories of traffic to consider: theControl Plane (negotiation) and theData Plane(transit).
First, the IKE negotiation (UDP 500/4500) and IPSec/ESP packets are directed at the firewall's own external interface. Because the peer gateway is usually reachable through the same zone as that interface (e.g.,
'Untrust'), the traffic is processed asintrazone. By default, PAN-OS includes anintrazone-defaultsecurity policy set to 'Allow'. Consequently, the tunnel can technically establish without an explicit rule, provided no manual 'Deny All' rule precedes it. This confirms that negotiation is allowed by default via the intrazone policy.
Second, regarding the data traffic entering or exiting the tunnel interface, the firewall applies standard zone- based inspection. While the firewall is stateful and policies are unidirectional, the documentation specifies that creating separate rules for each direction (one for inbound and one for outbound) isoptional. An administrator can choose to create two granular rules for tighter control or combine both directions into a single rule by adding both the internal and tunnel zones to the source and destination fields. This flexibility allows for a more streamlined rulebase while still meeting security requirements.


NEW QUESTION # 89
After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.
Which of the following actions will resolve this issue?

Answer: C

Explanation:
The Proxy IDs (or Traffic Selectors) define the local and remote subnets that are allowed to communicate over the IPSec tunnel. If the Proxy IDs on the Palo Alto Networks firewall do not match the configuration on the Cisco ASA, the tunnel will fail to establish because the firewalls won't agree on which traffic to encrypt. Ensuring that the Proxy IDs match between the Palo Alto Networks firewall and the Cisco ASA will resolve the issue.


NEW QUESTION # 90
An administrator is configuring a GlobalProtect pre-logon VPN. The administrator has already imported the necessary internal certificate authority (CA) certificates for issuing machine certificates onto the firewall.
Which configuration is required on the GlobalProtect Gateway to enable pre-logon using these machine certificates?

Answer: D

Explanation:
Basic Concept: GlobalProtect pre-logon uses a machine certificate before any user logs in. The gateway must be configured to validate that machine certificate through a certificate profile.
Why C is Correct: Assigning a certificate profile that trusts the machine certificate CA in Gateway client authentication enables pre-logon certificate validation.
Why A is Wrong: Create a device-based Security policy that allows traffic from the pre-logon user to an internal management zone. relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.
Why B is Wrong: Create an authentication profile that points to the machine certificate's CA and assign it by using the client authentication settings of the GlobalProtect Portal. relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.
Why D is Wrong: Configure the Gateway Agent -- > Tunnel Settings to use IPSec with machine certificate authentication for the pre- logon tunnel. relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.


NEW QUESTION # 91
What are the phases of the Palo Alto Networks AI Runtime Security: Network Intercept solution?

Answer: C

Explanation:
The phases of the Palo Alto Networks AI Runtime Security: Network Intercept solution are designed to help identify and protect against potential threats in real time by using AI to detect and prevent malicious activities within the network.
Discovery: Identifying applications, services, and behaviors within the network to understand baseline activity.
Deployment: Implementing the solution into the network and integrating with existing security measures.
Detection: Monitoring traffic and activities to identify abnormal or malicious behavior.
Prevention: Taking action to stop threats once detected, such as blocking malicious traffic or stopping exploit attempts.


NEW QUESTION # 92
......

All contents of NGFW-Engineer training prep are made by elites in this area rather than being fudged by laymen. Let along the reasonable prices of our NGFW-Engineer exam materials which attracted tens of thousands of exam candidates mesmerized by their efficiency by proficient helpers of our company. Any difficult posers will be solved by our NGFW-Engineer Quiz guide. And we have free demos of our NGFW-Engineer study braindumps for you to try before purchase.

Latest NGFW-Engineer Dumps: https://www.vce4dumps.com/NGFW-Engineer-valid-torrent.html

BONUS!!! Download part of VCE4Dumps NGFW-Engineer dumps for free: https://drive.google.com/open?id=1pGIgliTgf4p3pvBNMo-sVqjUem-SNgA9