The Fortinet NSEI_OTS_AR-7.6 practice tests on this software will allow you to self-assess your progress. It also allows you to schedule your Fortinet NSEI_OTS_AR-7.6 practice exam. It imitates the actual pattern of the NSEI_OTS_AR-7.6 Exam. This format works on Windows-based devices and requires no internet connection. The dedicated support team works hard to resolve any problem at any time.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management |
| Network Security | 25% | - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems |
| Network Access Control | 25% | - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models - Authentication and access policies for OT devices |
| Asset Management | 25% | - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) - Fortinet Security Fabric for OT environments |
>> NSEI_OTS_AR-7.6 New Dumps Questions <<
Success in the Fortinet NSEI_OTS_AR-7.6 certification exam gives a huge boost to your career in the sector. You polish and validate your capabilities with the Fortinet NSEI_OTS_AR-7.6. However, certification test demands a thorough knowledge of Fortinet NSEI_OTS_AR-7.6 Exam domains from credible preparation material, and this is the part where test takers lose hope.
NEW QUESTION # 45
Refer to the exhibit.
A FortiAnalyzer report is shown.
You must extract relevant information provided by the report regarding your OT network.
Which two statements are correct? (Choose two.)
Answer: C,D
Explanation:
The correct answers are B and C . The exhibit ' s Top Threat section identifies the IPS threats as Blocked , directly confirming that the attacks were prevented rather than merely detected. The OT Traffic table also shows destination port 502 . Modbus/TCP conventionally operates on TCP port 502, and the OT Security 7.6 study guide identifies Modbus as an industrial protocol supported and inspected by Fortinet OT security controls. The report does not cover only one day; its displayed timeline spans multiple dates, from approximately October 30 through November 3. Option D is also inconsistent with the report because the visible OT destination addresses are associated with the 192.168.x.x networks rather than 10.1.5.1.
FortiAnalyzer reports summarize logged information into charts and tables specifically to expose traffic patterns, threats, and OT activity such as this.
NEW QUESTION # 46
Refer to the exhibit.
A partial OT network is shown.
PLC-1 has a known critical vulnerability, but you cannot update it.
What must you configure to protect PLC-1?
Answer: A
Explanation:
The correct answer is C . This scenario is the precise use case for virtual patching . The OT Security 7.6 study guide states that virtual patching protects OT devices that have not yet been updated against vulnerability exploits . FortiGate identifies the vulnerable asset, queries FortiGuard for device-specific vulnerabilities and mitigation rules, receives applicable OT virtual-patching signatures, and maps those rules to the device. When traffic associated with the vulnerable asset reaches FortiGate, the firewall policy containing the virtual-patching profile applies the protection. In the topology, FortiGate_Level2 is the enforcement point immediately protecting PLC-1 and the control-network assets. IPS at Level 5 provides broader perimeter protection, but it is not the device-specific compensating control requested here.
Application Control primarily regulates industrial protocols and commands. Therefore, Virtual patching on FortiGate_Level2 is required.
NEW QUESTION # 47
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 48
Refer to the exhibit.
The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section .
The study guide states clearly that "By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility." That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles . So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.
The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section .
The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility .
NEW QUESTION # 49
How are rogue devices evaluated in FortiNAC? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. Through device profiling rules . The study guide states: "When a rogue device record is created, the device is evaluated against the enabled device profiling rules." It further explains that "FortiNAC evaluates a device against each rule until a failed, passed, or cannot evaluate result is reached." That is the direct evaluation mechanism used for rogue devices in FortiNAC.
The guide also adds that "Device profiling rules are used to evaluate and classify rogue devices" and that FortiNAC applies rule methods and classification settings to determine whether the device matches a known type. This is why the other options are incorrect: FortiGuard server queries and the local device database (CIDB) relate to FortiGate device detection workflows, not FortiNAC rogue-device evaluation, and importing a devices list is not the evaluation method described for rogue devices.
NEW QUESTION # 50
......
If you want to take the NSEI_OTS_AR-7.6 exam then keep in your mind that proper Fortinet NSE I - OT Security 7.6 Architect preparation is the key to success. Without Fortinet NSEI_OTS_AR-7.6 test preparation, you can do nothing. For well Fortinet NSEI_OTS_AR-7.6 exam preparation, I would like to recommend you SureTorrent. SureTorrent is the top-rated and leading platform that offers the best Fortinet NSE I - OT Security 7.6 Architect, NSEI_OTS_AR-7.6 exam study material. SureTorrent provides the latest and real NSEI_OTS_AR-7.6 PDF Questions and practice tests that will assist you to pass the Fortinet NSEI_OTS_AR-7.6 test on the first try. SureTorrent latest Fortinet NSE I - OT Security 7.6 Architect dumps are the best to prepare and pass the Fortinet NSE I - OT Security 7.6 Architect, version NSEI_OTS_AR-7.6 certification test. These genuine NSEI_OTS_AR-7.6 exam dumps assist you to achieve excellent scores in the NSEI_OTS_AR-7.6 test. SureTorrent design this Fortinet NSEI_OTS_AR-7.6 practice test material with the help of the world's most respected professionals.
Actual NSEI_OTS_AR-7.6 Test Pdf: https://www.suretorrent.com/NSEI_OTS_AR-7.6-exam-guide-torrent.html