The data for our SRAN-Radio-Network-Performance-Optimization practice materials that come up with our customers who have bought our SRAN-Radio-Network-Performance-Optimization actual exam and provided their scores show that our high pass rate is 98% to 100%. This is hard to find and compare with in the market. And numerous enthusiastic feedbacks from our worthy clients give high praises not only on our SRAN-Radio-Network-Performance-Optimization Study Guide, but also on our sincere and helpful 24 hours customer services online. You will feel grateful to choose our SRAN-Radio-Network-Performance-Optimization learning quiz!
| Section | Objectives |
|---|---|
| Topic 1: SRAN Architecture Overview | - SRAN network structure and components
|
| Topic 2: RF Optimization Principles | - Coverage and capacity optimization
|
| Topic 3: LTE/NR Performance Optimization | - Optimization techniques
|
| Topic 4: Troubleshooting and Performance Analysis | - Network issue identification and resolution
|
| Topic 5: Radio Network Performance Fundamentals | - Key performance indicators (KPIs)
|
>> Nokia SRAN-Radio-Network-Performance-Optimization Valid Mock Test <<
In order to meet the requirements of our customers, Our SRAN-Radio-Network-Performance-Optimization test questions carefully designed the automatic correcting system for customers. It is known to us that practicing the incorrect questions is very important for everyone, so our SRAN-Radio-Network-Performance-Optimization exam question provide the automatic correcting system to help customers understand and correct the errors. If you want to improve your correct rates of exam, we believe the best method is inscribed according to the fault namely this in appearing weak sports, specific aim ground consolidates knowledge is nodded. Our SRAN-Radio-Network-Performance-Optimization Guide Torrent will help you establish the error sets. We believe that it must be very useful for you to take your exam, and it is necessary for you to use our SRAN-Radio-Network-Performance-Optimization test questions.
NEW QUESTION # 27
Regarding the Vo5G / IMS voice and video over 5G feature, which statements are correct?
Answer: A
Explanation:
The correct answer is C: A, B, C, and D .
This question is about Vo5G / VoNR IMS service support in 5G SA. For IMS-based services over 5G, different QoS flows are used for signaling, voice media, and video media.
Statement A is correct.
The feature supports IMS voice and video over 5G in the gNB for FR1 , including both TDD and FDD deployments.
Statement B is correct.
IMS signaling commonly uses 5QI 5 . This QoS flow carries SIP/IMS signaling messages such as registration, session setup, modification, and release.
Statement C is correct.
IMS conversational voice uses 5QI 1 , which is the standardized GBR QoS identifier for conversational voice.
Statement D is correct.
IMS conversational video commonly uses 5QI 2 , which is associated with conversational video traffic.
NEW QUESTION # 28
Choose the correct statement from the options below.
Answer: D
Explanation:
The correct answer is B .
Beamforming is mainly about shaping and directing radio energy toward a UE or a target area. It improves coverage, SINR, and cell-edge performance by focusing the transmitted or received signal in a specific direction.
MIMO , or Multiple Input Multiple Output , uses multiple antenna paths to improve throughput, reliability, and spectral efficiency. MIMO can be used for spatial multiplexing, diversity, or beamforming depending on the antenna system and radio configuration.
Option A is incorrect because beamforming and MIMO are related but not the same.
Option C reverses the definitions.
Option D is incorrect because beamforming and MIMO are commonly used together, especially in Massive MIMO systems.
So the correct statement is:
Beamforming focuses on directing the signal, while MIMO focuses on utilizing multiple paths for data transmission.
NEW QUESTION # 29
Which parameter defines the PRACH format ?
Answer: A
Explanation:
The correct answer is B .
The prachConfigurationIndex defines the PRACH configuration, including the PRACH time-domain occasions and the associated PRACH format according to the PRACH configuration tables. In 5G NR, PRACH configuration is based on 3GPP-defined PRACH tables, where the configuration index maps to the PRACH format and PRACH occasion structure.
The other options have different meanings:
A). msg1-FrequencyStart defines the frequency-domain starting position of PRACH occasion resources.
C). prachRootSequenceIndex defines the root sequence used for PRACH preamble generation.
D). totalNumberOfRAPreambles defines how many random access preambles are available.
Therefore, the parameter that defines the PRACH format is:
prachConfigurationIndex.
NEW QUESTION # 30
Consider that the UE is performing handover from LTE to NR with the help of features CB007742 / CB008731 . Referring to the picture below, at what stage can the handover be triggered from LTE to NR?
Answer: B
Explanation:
The correct answer is C: From Stage 3 .
In LTE-to-NR mobility, the handover or redirection decision is normally based on a combination of:
LTE serving-cell signal level becoming weak enough, and
NR neighbor-cell signal level becoming strong enough.
From the diagram:
In Stage 1 , LTE is still good and NR is still weak, so LTE-to-NR HO should not be triggered.
In Stage 2 , the NR neighbor signal is improving, but the required combined LTE/NR mobility condition is not yet fully satisfied.
In Stage 3 , the NR neighbor signal has crossed the required NR threshold, while the LTE serving-cell signal has degraded enough to justify moving the UE from LTE to NR. This is the first valid stage where LTE-to- NR HO can be triggered.
In Stage 4 , NR is already clearly strong, but the handover could already have been triggered earlier in Stage 3.
NEW QUESTION # 31
Single Network Slice Selection Assistance Information , or S-NSSAI , identifies a network slice. Which of the following statements are correct regarding NSSAI ? Refer to the diagram for basic information.
Answer: B
Explanation:
The correct answer is D: A, B, C, and D .
In 5G network slicing, S-NSSAI identifies a single network slice. It is composed of:
SST , or Slice/Service Type
SD , or Slice Differentiator
Statement A is correct.
The combination of SST + SD can uniquely identify a slice. For example, two slices may both use SST 1 for eMBB/MBB-type service, but different SD values can separate them for different enterprises, tenants, or service groups.
Statement B is correct.
SST is mandatory. It is an 8-bit numeric field that indicates the expected slice/service behavior, such as eMBB, URLLC, or mMTC.
Statement C is correct.
SD is optional. It is a 24-bit field used to differentiate multiple slices that may share the same SST.
Statement D is correct.
SST may use standardized values, such as SST 1 for eMBB, SST 2 for URLLC, and SST 3 for mMTC/MIoT.
It may also use operator-specific or non-standardized values depending on deployment requirements.
NEW QUESTION # 32
......
We are aware that the IT industry is a new industry. It is one of the chain to drive economic development. So its status can not be ignored. IT certification is one of the means of competition in the IT industry. Passed the certification exam you will get to a good rise. But pass the exam is not easy. It is recommended that using training tool to prepare for the exam. If you want to choose this certification training resources, Prep4SureReview's Nokia SRAN-Radio-Network-Performance-Optimization Exam Training materials will be the best choice. The success rate is 100%, and can ensure you pass the exam.
Latest SRAN-Radio-Network-Performance-Optimization Guide Files: https://www.prep4surereview.com/SRAN-Radio-Network-Performance-Optimization-latest-braindumps.html