P.S. Free & New CWNA-109 dumps are available on Google Drive shared by TestkingPass: https://drive.google.com/open?id=1a9v4zikfsS3zHZsbZOKw0H1in0xPPo9o
The CWNA-109 Practice Questions are designed and verified by experienced and renowned CWNP Wireless Network Administrator (CWNA) exam trainers. They work collectively and strive hard to ensure the top quality of TestkingPass CWNA-109 exam practice questions all the time. The CWNA-109 Exam Questions are real, updated, and error-free that helps you in CWNP Wireless Network Administrator (CWNA) exam preparation and boost your confidence to crack the upcoming CWNA-109 exam easily.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
All operating systems also support this web-based CWNA-109 practice test. The third format is desktop CWNP CWNA-109 practice exam software that can be accessed easily after installing it on your Windows PC or Laptop. These formats are there so that the students can use them as per their unique needs and prepare successfully for CWNP Wireless Network Administrator (CWNA) (CWNA-109) the on first try.
NEW QUESTION # 103
What is always required to establish a high quality 2.4 GHz RF link at a distance of 3 miles (5 kilometers)?
Answer: A
Explanation:
What is always required to establish a high quality 2.4 GHz RF link at a distance of 3 miles (5 kilometers) is a Fresnel Zone that is at least 60% clear of obstructions. The Fresnel Zone is an elliptical-shaped area around the line-of-sight path between two antennas that reflects and refracts the RF waves. The Fresnel Zone radius depends on the frequency of the RF signal and the distance between the antennas. For optimal performance, the Fresnel Zone should be at least 60% clear of any obstructions that may cause interference, attenuation, or multipath fading. The minimum output power level, antenna gain, and antenna type may vary depending on the environmental conditions and regulatory constraints, but they are not always required for a high quality RF link. References: [CWNP Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page 75; [CWNA: Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109], page
65.
NEW QUESTION # 104
You are troubleshooting a controller-based AP that is unable to locate the controller. DHCP is not use and the controller is located at 10.10.10.81/24 while the AP is on the 10.10.16.0/24 network. What should be inspected to verify proper configuration?
Answer: A
Explanation:
What should be inspected to verify proper configuration is DNS. DNS stands for Domain Name System and is a service that resolves hostnames to IP addresses. In a controller-based AP deployment, DNS can be used to help the AP locate the controller by using a predefined hostname such as CISCO-CAPWAP-CONTROLLER or aruba-master. The AP sends a DNS query for this hostname and receives an IP address of the controller as a response. Therefore, if DNS is not configured properly or if there is no DNS entry for the controller hostname, the AP may not be able to locate the controller. NTP, BOOTP, and AP hosts file are not relevant for this scenario. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 374; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 364.
NEW QUESTION # 105
In an 802.11 2.4 GHz system, what 22 MHz channels are considered non-overlapping?
Answer: D
Explanation:
In the 2.4 GHz frequency band used for 802.11 wireless networks, the channel bandwidth is typically 20 MHz, but the actual frequency spread of each channel is about 22 MHz due to the modulation techniques used. This spread causes overlap between adjacent channels, which can lead to interference and degrade network performance. To avoid this, it's essential to use non-overlapping channels.
The three non-overlapping channels in the 2.4 GHz band are 1, 6, and 11. Each of these channels is spaced sufficiently apart to avoid interference with each other:
* Channel 1: Centered at 2.412 GHz.
* Channel 6: Centered at 2.437 GHz.
* Channel 11: Centered at 2.462 GHz.
Given the options provided, option C (1 and 5) is the closest to a pair of non-overlapping channels, although in practice, channel 5 would still cause some interference with channel 1 due to the 22 MHz spread. The ideal choice for non-overlapping channels would be any two channels among 1, 6, and 11, but this is not an option provided. Therefore, within the given options, 1 and 5 are the best choice, understanding that in a real-world scenario, 1 and 6 or 6 and 11 would be preferred to avoid overlap.
References:
* CWNA Certified Wireless Network Administrator Official Study Guide: ExamCWNA-109, by David D: Coleman and David A. Westcott.
* Understanding 2.4 GHz channel arrangement and interference patterns in 802.11 wireless networks.
NEW QUESTION # 106
You are evaluating access points for use in the 5 GHz frequency band. What PHY supports this band and supports 80 MHz channels?
Answer: D
Explanation:
VHT stands for Very High Throughput, which is a physical layer (PHY) specification that supports the 5 GHz frequency band and supports 80 MHz channels. VHT is used by the IEEE 802.11ac standard, which is also known as Wi-Fi 5. VHT allows for higher data rates and more spatial streams than the previous HT (High Throughput) PHY, which is used by the IEEE 802.11n standard, also known as Wi-Fi 4. HT supports the 2.4 GHz and 5 GHz bands, but only supports up to 40 MHz channels12 The other options are not correct because:
* ERP (option C) stands for Extended Rate PHY, which is a physical layer specification that supports the
2.4 GHz frequency band and supports up to 20 MHz channels. ERP is used by the IEEE 802.11g standard, which is also known as Wi-Fi 3. ERP allows for higher data rates than the previous DSSS (Direct Sequence Spread Spectrum) PHY, which is used by the IEEE 802.11b standard, also known as Wi-Fi 234
* OFDM (option D) stands for Orthogonal Frequency Division Multiplexing, which is a modulation technique that divides a signal into multiple subcarriers that are spaced orthogonally to each other.
OFDM is not a physical layer specification, but a common feature of many PHY specifications, including ERP, HT, and VHT. OFDM allows for higher spectral efficiency and robustness against multipath interference than the previous CCK (Complementary Code Keying) modulation technique used by DSSS34
NEW QUESTION # 107
What terms accurately complete the following sentence? The IEEE 802.11-2016 standard specifies mandatory support of the _______________ cipher suite for Robust Security Network Associations, and optional use of the ________________ cipher suite, which is designed for use with pre-RSNA hardware and is deprecated.
Answer: C
NEW QUESTION # 108
......
The CWNP Wireless Network Administrator (CWNA) prep torrent that we provide is compiled elaborately and highly efficient. You only need 20-30 hours to practice our CWNA-109 exam torrent and then you can attend the exam. For most of our customers, who are busy with their jobs or other things. But if they use our CWNA-109 test prep, they won't need so much time to prepare the exam and master exam content in a short time. What they need to do is just to spare 1-2 hours to learn and practice every day and then pass the exam with CWNA-109 Test Prep easily. It costs them little time and energy to pass the exam.
CWNA-109 Reliable Test Syllabus: https://www.testkingpass.com/CWNA-109-testking-dumps.html
P.S. Free 2026 CWNP CWNA-109 dumps are available on Google Drive shared by TestkingPass: https://drive.google.com/open?id=1a9v4zikfsS3zHZsbZOKw0H1in0xPPo9o