The last format is desktop NSE7_FSN_AR-7.6 practice test software that can be accessed easily just by installing the software on the Windows Pc or Laptop. The desktop software format can be accessed offline without any internet so the students who don't have internet won't struggle in the preparation for NSE7_FSN_AR-7.6 Exam. These three forms are specially made for the students to access them according to their comfort zone and NSE7_FSN_AR-7.6 exam prepare for the best.
| Section | Objectives |
|---|---|
| SD-WAN | - SD-WAN deployment
|
| Enterprise Firewall | - System configuration
|
>> Fortinet NSE7_FSN_AR-7.6 Exams Torrent <<
Our product is revised and updated according to the change of the syllabus and the latest development situation in the theory and the practice. The NSE7_FSN_AR-7.6 exam torrent is compiled elaborately by the experienced professionals and of high quality. The contents of NSE7_FSN_AR-7.6 guide questions are easy to master and simplify the important information. It conveys more important information with less answers and questions, thus the learning is easy and efficient. The language is easy to be understood makes any learners have no obstacles. The NSE7_FSN_AR-7.6 Test Torrent is suitable for anybody no matter he or she is in-service staff or the student, the novice or the experience people who have worked for years. The software boosts varied self-learning and self-assessment functions to check the results of the learning.
NEW QUESTION # 70
Which two protocol states indicate that traffic is bidirectional? (Choose two.)
Answer: C,D
Explanation:
The correct answers are A and B .
For UDP , the study guide states this directly: "For UDP, the session state can have only two values: 00 when traffic is only one way, and 01 when traffic is two ways. For ICMP, the protocol state is always
00."
That makes B correct and D incorrect.
For TCP , the study guide explains that the protocol state is a two-digit number, where the first digit is the server-side state and the second digit is the client-side state . It also states that the first digit is 0 when the session is not subject to any inspection , and the TCP state table shows that value 1 = ESTABLISHED So, for a normal non-proxied/non-inspected TCP session, proto_state=01 means the TCP session is in the ESTABLISHED state. An established TCP session means the three-way handshake has completed, which requires traffic in both directions. That is why A is correct.
The study guide also says: "proto_state=11 means that the TCP three-way handshake for both server- side and client-side is completed (ESTABLISHED)." This confirms that TCP state value 1 represents an established state.
Why C is not selected: the study guide defines value 5 as TIME_WAIT and says: "When a session is closed by both the sender and receiver, FortiGate keeps that session in the session table for a few seconds...
This is the state value 5."
So proto_state=05 represents a closing/closed TCP session in TIME_WAIT , not the normal bidirectional state the question is testing.
Therefore, the verified answers are A and B .
NEW QUESTION # 71
Refer to the exhibit, which shows the output of a real-time debug. Which statement about this output is true?
(Choose one answer)
Answer: A
Explanation:
The correct answer is A.
The debug output is for an HTTPS request and shows a hostname value. The study guide explains that with SSL certificate inspection, FortiGate extracts the FQDN from either:
"TLS extension server name indication (SNI)"
"SSL certificate common name (CN)"
So the hostname shown in the real-time web-filter debug can be derived from the SNI in the client request or, if needed, from the CN in the server certificate. That makes A correct.
Why the other options are wrong:
B is wrong because the study-guide example for web-filter real-time debug explicitly says: "This slide shows an example of real-time debug output when the URL to categorize isn ' t in the FortiGuard cache."In these debugs, cat=255 appears before the final lookup result, so this does not indicate a local-cache hit.
C is wrong because ftgd-allow is the action, not the profile name. The debug line shows the action as action=9 (ftgd-allow) while the profile shown is profile= ' default ' . FortiOS web-filter logs also use the profile field separately from the action field D is wrong because the final category shown is url_cat=52, not 255. The study guide's example shows the same pattern: an initial cat=255 in the request line, followed by the resolved result cat=52 url_cat=52 So the verified answer is: A.
NEW QUESTION # 72
Which two statements about Security Fabric communications are true? (Choose two.)
Answer: B,C
NEW QUESTION # 73
Refer to the exhibit.
The output from a collector agent log is shown. The collector agent is showing the status of a workstation as Not Verified . What are two common causes for this message? (Choose two.)
Answer: B,D
Explanation:
The correct answers are B and C .
The study guide has a section titled "Not Verified Status on the Collector Agent" and states:
"The collector agent cannot verify if the user is still logged in" and lists these common causes :
* "A firewall is blocking traffic to port 139 and 445"
* "The workstation remote registry service is not running"
The guide also explains the verification method:
"For WMI polling mode, the collector agent checks the WMI service. For all the other modes, the collector agent checks the HKEY_USERS hive through remote registry services." If the workstation does not respond to these checks, the status can become not verified An additional requirements slide in the same study guide confirms:
* "TCP ports 139 and 445 must be open between the collector agent and all workstations"
* "Remote registry service must be up and running on each workstation"
Why the other options are wrong:
* A is wrong because the study guide mentions a workstation coming out of hibernate mode under a different problem: "No Internet After IP Address Change" , not as a common cause of Not Verified status
* D is wrong because DNS resolution issues are also discussed under the IP address change scenario, where the collector agent uses DNS to resolve the workstation name after an IP change. That is separate from the Not Verified causes listed for this log message So the verified answers are: B, C .
NEW QUESTION # 74
Refer to the exhibits.
An OSPF peer is advertising route 172.16.52.0/24. The local FortiGate is configured with an inbound distribution list that allows the 172.16.0.0/16 network to be injected into its routing table. However, the 1 '
2.16.52.0/24 subnet cannot be seen in the FIB.
Which two stops can the administrator of the local FortiGate take to ensure that the advertised 172.16. 52.0/24 subnet will be injected into the routing table? (Choose two.)
Answer: B,C
Explanation:
The issue is caused by the strict matching logic of the configured Prefix List.
Current State: The rule is edit 1 with set prefix 172.16.0.0 255.255.0.0 and both ge (greater than or equal) and le (less than or equal) are unset.
Behavior: When ge and le are unset, FortiOS requires an exact match of the subnet mask. The current rule only matches the exact network 172.16.0.0/16. It denies 172.16.52.0/24 because the mask (/24) does not match the rule ' s mask (/16).
To fix this and inject 172.16.52.0/24, you must modify the list to match the /24 mask:
A). Add another entry to the prefix list to specifically allow the 172.16.52.0/24 network:
Creating a new rule (e.g., edit 2) with set prefix 172.16.52.0 255.255.255.0 will provide an exact match for the incoming route, allowing it to pass the distribute-list.
B). Change the ge value to 17:
By configuring set ge 17 on the existing rule (conceptually 172.16.0.0/16 ge 17), you change the logic from " exact match " to " range match " .
This configuration tells the router to match any prefix starting with 172.16.x.x that has a subnet mask length of 17 or greater.
Since the incoming route is a /24, and 24 is greater than 17, the route will match the prefix list and be accepted.
Why other options are incorrect:
C: The option text appears to read " Change the ... value to 16 " . If this refers to le 16, it would enforce the mask to be exactly /16 or less, which still excludes /24.
D: Changing the default behavior to implicit allow defeats the purpose of a filter (security control) and is not a standard configuration step for fixing a single missing route.
Reference:
FortiGate Security 7.6 Study Guide (Routing): " In prefix-lists, if ge and le are not used, the subnet mask must match exactly. To match subnets within a range, you must define the prefix length boundaries using ge or le. "
NEW QUESTION # 75
......
This allows candidates to choose the format that best suits their learning style and preference, ensuring a seamless and effective exam preparation experience. By offering tailored solutions to meet individual needs, DumpsActual has established itself as a trusted provider of top-quality Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam preparation material.
NSE7_FSN_AR-7.6 Exam Cram Questions: https://www.dumpsactual.com/NSE7_FSN_AR-7.6-actualtests-dumps.html