The Fortinet NSEI_OTS_AR-7.6 PDF format is printable which enables you to do paper study. It contains pool of actual and updated Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam questions. You can carry this portable file of Fortinet NSEI_OTS_AR-7.6 Real Questions to any place via smartphones, laptops, and tablets. This simple and convenient format of BraindumpStudy's Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) practice material is being updated regularly.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Network Security | 25% | - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Security automation and threat response - Virtual patching for legacy OT systems |
| Topic 2: Asset Management | 25% | - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) - Device detection and inventory using FortiGate & FortiNAC |
| Topic 3: Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management - Event handling and logging with FortiAnalyzer 7.6 |
| Topic 4: Network Access Control | 25% | - Authentication and access policies for OT devices - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation |
>> Latest NSEI_OTS_AR-7.6 Dumps Questions <<
Besides this PDF format, Fortinet NSEI_OTS_AR-7.6 practice exams in desktop and web-based versions are available to aid you in recognizing both your weaker and stronger concepts. These real Fortinet NSEI_OTS_AR-7.6 Exam Simulator exams also points out your mistakes regarding the Fortinet NSEI_OTS_AR-7.6 exam preparation.
NEW QUESTION # 37
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Answer: B
Explanation:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
NEW QUESTION # 38
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: C
Explanation:
Based on the OT Security 7.6 Architect study guide regarding the Asset Identity Center and Asset Management :
* Vulnerability Visibility : The Asset Identity List tab displays key metadata for IT and OT devices, including detected addresses, users, and a specific column for Vulnerabilities .
* Virtual Patching Feature : In the OT Security 7.6 architecture, the " Vulnerabilities " column is populated through the OT Security Service license, which includes " OT vulnerability correlation definitions & virtual patching signatures " .
* Correlation Mechanism : FortiGate extracts metadata from OT traffic and uses these signatures to identify known vulnerabilities on the assets. For these vulnerabilities to be identified and correlated in the Asset Identity Center as shown in the exhibit (displaying a count of 8 vulnerabilities), the Virtual Patching feature must be active.
* Architectural Implementation : Virtual patching is a critical component of the " Protection " layer in OT networks, allowing administrators to secure legacy or unpatchable PLCs and RTUs by blocking exploit attempts at the network level using IPS-based virtual patching signatures.
* Exhibit Analysis : The presence of identified vulnerabilities (the number " 8 " in the red shield) in the Asset Identity List confirms that the FortiGate is actively performing vulnerability correlation, which is the operational result of having a Virtual Patching security profile applied to the relevant firewall policy.
NEW QUESTION # 39
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: C,E
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 40
Refer to the exhibit.
A partial OT network is shown. You want to provide the supervisor with secure remote access. Which two features can you implement on Edge-FortiGate ? (Choose two answers)
Answer: A,C
Explanation:
Based on the exhibit and the OT Security 7.6 Architect standards for Secure Remote Access :
* Secure Tunneling (Statement A) : The exhibit shows a Remote PC connecting through a VPN Cloud to the Edge-FortiGate . In the Fortinet architecture, IPsec VPN is the primary method for establishing a secure, encrypted tunnel for remote administrators or supervisors to access the internal OT segments (Level 2/3) from an external location.
* Multi-Factor Authentication (Statement B) : Secure remote access in OT environments (aligned with IEC 62443 standards) requires strong authentication. The study guide emphasizes the use of FortiToken to provide Two-Factor Authentication (2FA) for VPN users, ensuring that compromised credentials alone are not enough to gain access to critical infrastructure.
* FSSO (Statement D) : Fortinet Single Sign-On is generally used for identifying internal users already on the network to apply identity-based policies; it is not the primary mechanism for establishing the remote connection itself.
* SD-WAN (Statement C) : While SD-WAN can manage the path of the VPN traffic, it is a WAN optimization and reliability feature, not a " secure remote access " feature for a supervisor in the context of authentication and encryption.
NEW QUESTION # 41
You would like to customize your current FortiAnalyzer report to provide a better risk assessment of your OT network. Which two options can you use to enhance your report? (Choose two answers)
Answer: A,E
Explanation:
The correct answers are B. The Datasets library and D. The Chart library .
The study guide explains that a FortiAnalyzer report is built from charts, and that charts consist of two elements: datasets and format . It states: "A FortiAnalyzer report is a set of data organized in charts" and "Charts consist of two elements: Datasets ... and Format." It then goes further in the Customizing Reports section and explicitly says "By default, the Chart Library contains more than 300 charts" and
"By default, the Datasets library contains almost 400 datasets." It also states that you can clone and edit both charts and datasets, and create new ones , which is exactly how you enhance and customize an existing report.
The other options are not the best answers for this question. FortiView can export a chart into a report chart, and Log View can help build a custom dataset and chart from search results, but the question asks which options you can use to enhance the report itself. The study guide identifies the actual report-customization components as the Chart Library and Datasets library . Dashboard library is not presented as a FortiAnalyzer report customization library in this section.
NEW QUESTION # 42
......
You can easily assess yourself with the help of our NSEI_OTS_AR-7.6 practice software, as it records all your previous results for future use. You can easily judge whether you can pass Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) on the first attempt or not, and if you don't, you can use this software to strengthen your preparation.
Reliable NSEI_OTS_AR-7.6 Exam Testking: https://www.braindumpstudy.com/NSEI_OTS_AR-7.6_braindumps.html