2026 Latest Exams4sures NSE4_FGT_AD-7.6 PDF Dumps and NSE4_FGT_AD-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1n0FTxhCVHDyQlZk8Z0QjNtu21BLfwuCh
Our NSE4_FGT_AD-7.6 exam guide is suitable for everyone whether you are a business man or a student, because you just need 20-30 hours to practice on our NSE4_FGT_AD-7.6 exam questions, then you can attend to your NSE4_FGT_AD-7.6 exam. There is no doubt that you can get a great grade. If you follow our NSE4_FGT_AD-7.6 learning pace, you will get unexpected surprises. What are you waiting for? Just choose Fortinet NSE 4 guide question to improve your knowledge to pass NSE4_FGT_AD-7.6 exam, which is your testimony of competence. You will get what you are dreaming for.
| Section | Objectives |
|---|---|
| Topic 1: Monitoring and Troubleshooting | - Diagnostics tools
|
| Topic 2: VPN and Secure Connectivity | - IPsec VPN
|
| Topic 3: Network Security Concepts and Architecture | - Fortinet Security Fabric Overview
|
| Topic 4: Routing and SD-WAN | - SD-WAN configuration
|
| Topic 5: Security Profiles and Content Inspection | - Antivirus and intrusion prevention
|
| Topic 6: FortiGate Deployment and System Configuration | - Initial setup and configuration
|
| Topic 7: Firewall Policies and Authentication | - Policy creation and management
|
>> NSE4_FGT_AD-7.6 Exam Preparation <<
Our NSE4_FGT_AD-7.6 study materials can improves your confidence for real NSE4_FGT_AD-7.6 exam and will help you remember the exam questions and answers that you will take part in. You can choose the version which suits you mostly. Our NSE4_FGT_AD-7.6 exam torrents simplify the important information and seize the focus to make you master the NSE4_FGT_AD-7.6 Test Torrent in a short time. To gain a comprehensive understanding of our NSE4_FGT_AD-7.6 study materials, you have to look at the introduction of our product firstly if you free download the demo of our NSE4_FGT_AD-7.6 exam questions.
NEW QUESTION # 61
You have implemented the application sensor and the corresponding firewall policy as shown in the exhibits.
You cannot access any of the Google applications, but you are able to access www.fortinet.com .
What would you do to resolve this issue?
Answer: A
Explanation:
"With these multiple filters, which one has the priority? After the IPS engine examines the traffic stream for a signature match, FortiGate scans packets for matches, in this order, for the application control profile:
1. Application and filter overrides ..."
"Next, the scan checks for application and filter overrides. Because a filter override is configured to block applications that use excessive bandwidth, it blocks all applications using excessive bandwidth , regardless of other categories that allow these applications."
"In this scenario, the filter override (Excessive-Bandwidth) is blocked and, since Dailymotion falls under the excessive bandwidth category, Dailymotion is blocked even though it is set to Monitor in the Application and Filter Overrides section. The priority in which application and filter overrides are placed takes precedence. "
"To allow web filtering, DNS filtering, or application control for HTTPS traffic , you must select an SSL inspection profile with certificate inspection or a deep inspection enabled." Technical Deep Dive:
The problem is not flow-based mode and not the SSL profile. Your firewall policy already has certificate- inspection , and the study guide explicitly says that application control for HTTPS traffic works with certificate inspection or deep inspection . So option B is unnecessary, and option A is unrelated.
The real issue is the override order inside the application sensor:
* Priority 1: Filter = Excessive-Bandwidth , Action = Block
* Priority 2: Vendor = Google , Action = Monitor
FortiGate evaluates overrides from top to bottom and applies the first match . Many Google applications match the Excessive-Bandwidth filter, so they are blocked before the later Google/Monitor override is ever reached. That is why Google apps fail while www.fortinet.com still works.
So the correct fix is to move the Google override above the Excessive-Bandwidth filter , making Google the first match.
A representative CLI-style logic would be:
config application list
edit " default "
config entries
edit 1
set vendor " Google "
set action monitor
next
edit 2
set filter " Excessive-Bandwidth "
set action block
next
end
next
end
That preserves the bandwidth block for other apps while allowing Google applications to match the higher- priority override first.
NEW QUESTION # 62
Refer to the exhibit.
FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.
Which action must the administrator perform to consolidate the two policies into one?
Answer: A
Explanation:
"By default, you can select only a single interface as the incoming interface and a single interface as the outgoing interface. This is because the option to select multiple interfaces, or any interface in a firewall policy, is disabled on the GUI. However, you can enable the Multiple Interface Policies option on the Feature Visibility page to disable the single interface restriction."
"You can also specify multiple interfaces, or use the any option, if you configure a firewall policy on the CLI, regardless of the default GUI setting." Technical Deep Dive:
The correct answer is D.
The policies are identical except for the incoming interface: one is for Sales and one is for Engineering. FortiGate GUI policy creation normally restricts you to one incoming interface per policy. To consolidate both into a single GUI policy, the administrator must enable Multiple Interface Policies so both port1 and port2 can be selected in the same rule.
Why the others are wrong:
A is not enough, because policy matching also includes the incoming interface, not just the source subnets.
B changes the network design and is unnecessary.
C would work too broadly by matching traffic from any interface, which is not the intended controlled consolidation.
A matching CLI-style concept would be:
config firewall policy
edit <id>
set srcintf "port1" "port2"
set dstintf "<server-interface>"
set srcaddr "Sales_Subnet" "Engineering_Subnet"
set dstaddr "<web-server>"
set service "HTTP" "HTTPS"
set action accept
next
end
That preserves a single policy while still being specific about which interfaces are allowed.
NEW QUESTION # 63
Refer to the exhibit.
A routing table is shown
An administrator wants to create a new static route so the traffic to the subnet 172.20.1.0/24 is routed through port2 only. What are the two criteria that the administrator can use to achieve this objective? (Choose two.)
Answer: A,D
Explanation:
From the routing table in the exhibit, there is already a static route for 172.20.1.0/24 pointing out port3 with:
Distance = 9
Priority = 2
Type = Static
In FortiOS, route selection prefers (in order) the route with the lowest administrative distance to a destination.
Therefore, to make traffic to 172.20.1.0/24 go through port2 only, the administrator must ensure the port2 static route is more preferred than the existing port3 route.
Why C is correct
C). The existing static route through port3 must have the distance set to 11.
If the existing port3 route distance is increased to 11, then a new port2 route with distance 9 will be preferred (9 < 11). This makes the port3 route a backup route instead of the active one.
Why D is correct
D). The new static route must have the distance set to 9
Setting the new port2 route distance to 9 (and increasing the port3 route to 11 as in option C) ensures FortiGate selects the port2 route as the best route for 172.20.1.0/24.
Why A and B are not correct
A (priority 3): By itself it does not guarantee selection over the existing route, and FortiOS route choice is driven primarily by distance.
B (metric 1): Metric is not the primary selector for static route preference compared to administrative distance in this scenario.
So the two criteria that achieve the objective are:
Make the existing port3 route less preferred by increasing its distance (C) Ensure the new port2 route uses the preferred distance (D)
NEW QUESTION # 64
Refer to the exhibits.
You have implemented the application sensor and the corresponding firewall policy as shown in the exhibits.
Which two factors can you observe from these configurations? (Choose two.)
Answer: A,B
Explanation:
From the exhibits:
The Application Control sensor has these key settings:
Application and Filter Overrides
Priority 1: Excessive-Bandwidth (Type: Filter) with Action Block
Priority 2: Google (Type: Filter) with Action Monitor
Category actions shown include Social Media set to Block (this category includes Facebook).
The firewall policy is using:
Flow-based inspection
Application control enabled (profile: default)
Deep inspection enabled (helps identify applications inside HTTPS)
Logging enabled
FortiOS applies Application Control as follows (top-down within the Application Control profile):
Overrides are evaluated by priority (highest priority first).
The first matching override determines the action (block/monitor/allow) for that traffic.
Category-based actions apply to applications that fall into those categories unless an override matches first.
Why A is correct
A . YouTube access is blocked based on Excessive-Bandwidth Application and Filter override settings.
The profile explicitly blocks the Excessive-Bandwidth behavior filter at the highest override priority.
When YouTube traffic is detected as matching the Excessive-Bandwidth behavior, FortiGate will apply the Block action due to the override.
Because this is a priority override, it is enforced before lower-priority entries.
Why B is correct
B . Facebook access is blocked based on the category filter settings.
The Application Sensor shows Social Media configured with a Block action.
Facebook is categorized under Social Media, so it will be blocked when matched by Application Control.
Why C is not correct
C . Facebook access is allowed but you cannot play Facebook videos...
Since the Social Media category is set to Block, Facebook would be blocked at the category level (not merely video playback).
Why D is not correct
D . YouTube search is allowed based on the Google override...
The Google override action is Monitor, not Allow.
"Monitor" logs/detects but does not override a block condition to "allow" traffic.
Also, YouTube traffic is not guaranteed to be treated as "Google" in a way that would permit it, and any matching block condition (such as Excessive-Bandwidth) would still take precedence.
NEW QUESTION # 65
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?
Answer: D
Explanation:
NetAPI: polls temporary sessions created on the DC when a user logs in or logs out and calls the NetSessionEnum function on Windows. It's faster than the WinSec and WMI methods; however, it can miss some login events if a DC is under heavy system load. This is because sessions can be quickly created and purged from RAM, before the agent has a chance to poll and notify FortiGate.
NEW QUESTION # 66
......
If you fail in NSE4_FGT_AD-7.6 exam test with Exams4sures NSE4_FGT_AD-7.6 exam dumps, we promise to give you full refund! You only need to scan your NSE4_FGT_AD-7.6 test score report to us together with your receipt ID. After our confirmation, we will give you full refund in time. Or you can choose to charge another exam Q&AS instead of NSE4_FGT_AD-7.6 Exam Dumps. Useful Fortinet certifications exam dumps are assured with us. If our NSE4_FGT_AD-7.6 exam dumps can’t help you pass NSE4_FGT_AD-7.6 exam, details will be sent before we send the exam to you. We don't waste our customers' time and money! Trusting Exams4sures is your best choice!
Exam NSE4_FGT_AD-7.6 Tests: https://www.exams4sures.com/Fortinet/NSE4_FGT_AD-7.6-practice-exam-dumps.html
DOWNLOAD the newest Exams4sures NSE4_FGT_AD-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1n0FTxhCVHDyQlZk8Z0QjNtu21BLfwuCh