In the era of rapid changes in the knowledge economy, do you worry that you will be left behind? Let's start by passing the Civil-Engineering-Technology exam. Getting a Civil-Engineering-Technology certificate is something that many people dream about and it will also bring you extra knowledge and economic benefits. The Civil-Engineering-Technology latest question we provide all candidates that that is compiled by experts who have good knowledge of exam, and they are very experience in compile study materials. Not only that, our team checks the update every day, in order to keep the latest information of Civil-Engineering-Technology Exam Question.
| Section | Weight | Objectives |
|---|---|---|
| Structural Design Fundamentals | 20% | - Structural analysis
|
| Surveying | 20% | - Measurement and calculation techniques
|
| Municipal Engineering | 20% | - Wastewater and stormwater management
|
| Materials Testing | 20% | - Soil mechanics and testing
|
| Transportation Engineering | 20% | - Highway and road design
|
>> New Civil-Engineering-Technology Study Guide <<
After you pay for our Civil-Engineering-Technology exam material online, you will get the link to download it in only 5 to 10 minutes. You don't need to worry about safety in buying our Civil-Engineering-Technology exam materials. Our products are free from computer virus and we will protect your private information. You won't get any telephone harassment or receiving junk E-mails after purchasing our Civil-Engineering-Technology Study Guide. If we have a new version of your study material, we will send an E-mail to you. Whenever you have questions about our Civil-Engineering-Technology study material, you are welcome to contact us via E-mail.
NEW QUESTION # 72
What would be the best step for an engineering team to propose to a client when reviewing a concept before a project is initiated?
Answer: B
Explanation:
Before a project is initiated, the essential decision is whether the concept isviable-technically, economically, and in terms of risks, constraints, and stakeholder needs. Afeasibility studyis the recognized pre-initiation step that evaluates alternatives at a high level, confirms the problem/need, examines constraints, and establishes whether moving into design is justified. In civil engineering systems development, feasibility is treated as an early stage that precedes planning and detailed design, with early cost and uncertainty considerations explicitly tied to the feasibility stage. Life cycle cost analysis is valuable, but it is typically one component used within feasibility/planning decisions rather than the primary "best step" to propose before initiation. Preliminary and detailed design occur after feasibility confirms the concept should proceed.
Therefore, the best step to propose at concept review before initiation is afeasibility study.
NEW QUESTION # 73
A civil engineering technologist is providing culvert location staking in the field for a project. What information is placed on the survey stakes?
Answer: C
Explanation:
Construction staking is intended to communicatelocationandgradeto the crew in a form they can build from.
For pipe and culvert work, the controlling grade is theinvert(flow line), because pipe installation, bedding, and hydraulic performance are governed by the invert elevations at key points (typically inlet/outlet ends and along stationing). Standard staking practice records theoffset distancefrom a control line/centerline and the vertical informationneeded to establish the required grade at the feature being built. Civil surveying references describe that stake markings commonly include distances from control (left/right offsets) and elevation/grade relationships to the feature staked. For culvert/pipeline staking specifically, invert elevations are a primary requirement so that the installed pipe meets design slope and elevation. Therefore, the appropriate stake information is theculvert invert elevationsalong with theoffset to the end of the culvert, enabling accurate placement without occupying the excavation line.
NEW QUESTION # 74
What is the primary force that a bridge in the diagram needs to resist?
Answer: D
Explanation:
The diagram depicts anarch-type bridge, where the load path is carried along the curved arch shape to the supports/abutments. In arch action, loads are transferred primarily ascompressive forcesthrough the arch ring
/rib; the structure pushes inward on itself while generating horizontal thrust at the abutments. Authoritative references describe that an arch bridge carries loads primarily bycompression, and the foundations/abutments must resist both vertical and horizontal components generated by that compressive thrust. Because the primary internal action in the arch member is compression (rather than tension in a cable, or bending- dominated action in a simple beam), the governing force type for the bridge form shown iscompression.
NEW QUESTION # 75
A project manager is aware of a faulty fall protection railing. The safety issue is reported but not remedied or documented. In the event of an incident, what is the maximum penalty for the first offence under the Occupational Health and Safety Act?
Answer: C
Explanation:
Under Alberta's Occupational Health and Safety (OHS) legislation, enforcement includes significant penalties for contraventions, especially where hazards like fall protection are involved and an incident occurs. Alberta's official guidance on convictions under OHS legislation states that for afirst offenceunder the OHS Act, fines can beup to $500,000and/orup to 6 months in prisonper violation (with additional daily fines possible if the offence continues). This directly matches the option describing a$500,000 fine and/or six months' imprisonment. The other options (loss of business licence, mandatory five-year imprisonment, etc.) are not the stated maximum first-offence penalty in the cited OHS information. Therefore, the correct maximum penalty for the first offence isOption C.
NEW QUESTION # 76
The critical path refers to which of the following series of tasks in a schedule?
Answer: C
Explanation:
The critical path is thelongest-duration paththrough a project network schedule and represents the sequence of activities withzero (or minimal) float. Because activities on this path have no schedule slack, any delay to a critical-path activity delays theproject completionunless mitigated (e.g., crashing, fast-tracking, resequencing). Standard project scheduling references define the critical path as the chain of tasks that determines theearliest possible finishdate; controlling and monitoring these tasks is essential for schedule management and forecasting. This is why contract administrators and project teams track critical activities and escalate risks affecting them-delivery delays, access constraints, approvals, and rework-because they directly move the completion milestone. Therefore, the critical path refers to tasks thatdictate the finish date of the project, which is optionA.
NEW QUESTION # 77
......
The VCETorrent Civil-Engineering-Technology exam practice test questions provide a way to assess your understanding of the material, identify areas for improvement, and build confidence and test-taking skills. The VCETorrent Civil-Engineering-Technology exam practice test questions are real and verified by Technical Examination - Civil Engineering Technology C.E.T (Civil-Engineering-Technology) exam trainers. They work collectively and strive hard to ensure the top standard of Technical Examination - Civil Engineering Technology C.E.T (Civil-Engineering-Technology) exam practice questions all the time.
Practice Civil-Engineering-Technology Test: https://www.vcetorrent.com/Civil-Engineering-Technology-valid-vce-torrent.html