P.S. Free 2026 Fortinet NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by ExamTorrent: https://drive.google.com/open?id=1X-rcTZ7g5ZmaTMrypRdt2tAy2r3LeL9N
Another great way to pass the NSE5_FSW_AD-7.6 exam in the first attempt is by doing a selective study with valid NSE5_FSW_AD-7.6 braindumps. If you already have a job and you are searching for the best way to improve your current NSE5_FSW_AD-7.6 test situation, then you should consider the NSE5_FSW_AD-7.6 Exam Dumps. By using our updated NSE5_FSW_AD-7.6 products, you will be able to get reliable and relative NSE5_FSW_AD-7.6 exam prep questions, so you can pass the exam easily. You can get one-year free Fortinet NSE 5 - FortiSwitch 7.6 Administrator exam updates from the date of purchase.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Fortinet NSE5_FSW_AD-7.6 Valid Exam Experience <<
Actually, most people do not like learning the boring knowledge. It is hard to understand if our brain rejects taking the initiative. Now, our company has researched the NSE5_FSW_AD-7.6 study materials, a kind of high efficient learning tool. Firstly, we have deleted all irrelevant knowledge, which decreases your learning pressure. Then, the difficult questions of the NSE5_FSW_AD-7.6 Study Materials will have vivid explanations. So you will have a better understanding after you carefully see the explanations.
NEW QUESTION # 20
Refer to the exhibits
Traffic arriving on port2 on FortiSwitch is tagged with VLAN ID 10 and destined for PC1 connected on port1. PC1 expects to receive traffic untagged from port1 on FortiSwitch. Which two configurations can you perform on FortiSwitch to ensure PC1 receives untagged traffic on port1? (Choose two.)
Answer: B,C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, the way a FortiSwitch handles VLAN tags on egress (outgoing) traffic is governed by the port'sNative VLANand its Untagged VLAN list. When traffic for VLAN 10 arrives at port2 (the uplink) and is forwarded to port1, the switch must determine whether to strip the 802.1Q tag before transmission.
* Untagged VLAN List (Option B):The documentation explicitly states that the "untagged VLAN list" specifies VLANs for which the port will transmit frameswithout the VLAN tag. By adding VLAN ID
10 to the untagged VLANs on port1, any traffic belonging to VLAN 10 will have its tag stripped at the egress point, ensuring PC1 receives a standard untagged frame.
* Configuration Logic (Option C):In FortiSwitch management, moving a VLAN from the "Allowed" list (which typically implies tagged delivery) to the "Untagged" list on a specific interface forces the switch to perform the tag-stripping action. This effectively converts the port from a trunked behavior for that VLAN to an "access" or untagged behavior.
Regarding the incorrect options:Option A (MAC-based assignment)is used primarily foringress classification. While it can assign a device to a VLAN when it sends trafficintothe switch, the documentation notes that by default, egress packets for MAC-based VLANs still include the tag unless the untagged list is configured.Option D(Private VLANs) is a security feature for isolating traffic between ports within the same VLAN and does not address the physical tagging requirements of the endpoint.
NEW QUESTION # 21
Refer to the exhibits. An IP phone is connected to port1 of FortiSwitch Access-1. The IP phone tags its traffic with VLAN ID 20. On FortiGate, VLAN IP_Phone (VLAN ID 20) has been configured, and port1 of Access-
1 is set with VLAN 20 as the native VLAN. However, the IP phone cannot reach the network. The exhibit shows the partial VLAN configuration and the port1 configuration on Access-1.
Which configuration change must you make on FortiSwitch to allow ingress and egress traffic for the IP phone? (Choose one answer)
Answer: B
Explanation:
According to theFortiSwitchOS 7.6 Administration GuideandFortiOS 7.6 FortiLink Guide, the processing of Ethernet frames on a managed FortiSwitch port depends on whether the frame is tagged or untagged upon arrival (ingress) and how the port's VLAN membership is defined.
In the provided exhibit,port1is configured with set vlan "IP_Phone" (VLAN 20) as itsnative VLAN. By definition, the native VLAN handles untagged traffic; any untagged frame arriving at the port is assigned to VLAN 20, and any egress traffic from VLAN 20 is sent out of the port without a tag. However, the scenario specifically states that theIP phone tags its traffic with VLAN ID 20.
When a FortiSwitch receives atagged frame, it checks the VLAN ID against theallowed-vlanslist configured on that port. Although VLAN 20 is the native VLAN, the exhibit shows that the port has been explicitly configured with set allowed-vlans "quarantine". This creates a restrictive filter that permits only tagged frames belonging to the "quarantine" VLAN to enter or exit the port. Because VLAN 20 (IP_Phone) is not present in the allowed-vlans list, the switch drops the tagged frames from the IP phone during ingress processing.
To resolve this, the administrator must modify theFortiSwitch port configurationby adding VLAN 20 to the allowed_vlans list (e.g., set allowed-vlans "quarantine" "IP_Phone" or set allowed-vlans-all enable). This ensures that the switch recognizes and permits tagged traffic for VLAN 20 on that physical interface. Option B is incorrect because l2forward is a Layer 3 interface setting on the FortiGate and does not address the physical port's ingress filtering logic on the switch. Disabling the edge_port (Option D) relates to Spanning Tree Protocol (STP) convergence and would not impact VLAN tag filtering.
NEW QUESTION # 22
Refer to the exhibits.
You are reviewing a FortiSwitch configuration where port1 and port2 are connected to a switched network.
Loop guard is enabled on port1.
The CLI output shows that the port1 status is triggered due to loop guard. Which two conditions could have caused this shutdown? (Choose two.)
Answer: A,D
Explanation:
According to the FortiSwitchOS 7.6 Administration Guide and the FortiSwitch 7.6 Study Guide , the Loop Guard feature protects Layer 2 networks from switching loops and broadcast storms. Unlike standard STP loop protection mechanisms, FortiSwitch Loop Guard operates by periodically sending out proprietary Loop Guard Data Packets (LGDP) / probe frames out of ports where loop guard is enabled.
The loop-detection logic evaluates whether these probe frames return to the switch:
* Frame Received Back on the Same Port (Option B): If a loop guard broadcast frame transmitted out of port1 traverses an external unmanaged hub, switch, or looped cable and is received back on port1, the switch detects a downstream loop directly connected to that port.
* Frame Received on Another Port of the Same Switch (Option A): In multi-homed connections to a switched network (such as port1 and port2 sharing the same Layer 2 broadcast domains/VLANs), a loop guard frame sent from port1 that loops through the switched network and is received on port2 proves that an active Layer 2 loop exists between those two switch interfaces.
When a loop condition is verified by either scenario, FortiSwitch changes the status of the protected port to Triggered (as verified in the CLI output of the exhibit) and takes the port out of service to isolate the loop.
Regarding the incorrect options: Option C describes Spanning Tree loop guard behavior (loss of BPDUs on non-designated ports), not the FortiSwitch proprietary loop guard mechanism. Option D describes Storm Control or rate limiting, which acts on packet volume thresholds rather than loop-detection probe frames.
NEW QUESTION # 23
Which is a requirement to enable SNMP v2c on a managed FortiSwitch?
Answer: C
Explanation:
To enable SNMP v2c on a managed FortiSwitch, the essential requirement involves configuring the SNMP agent and community strings:
* Configure SNMP Agent and Communities (D):
* SNMP Agent:Activating the SNMP agent on FortiSwitch allows it to respond to SNMP requests.
* Community Strings:SNMP v2c uses community strings for authentication. These strings function as passwords to grant read-only or read-write access to the SNMP data.
* Understanding Other Options:
* Create an SNMP user (A)is necessary for SNMP v3, not v2c, as it involves user-based authentication and encryption.
* Specify an SNMP host (B)is typically a part of SNMP configuration but not a requirement just to enable SNMP.
* Enable SNMP v3 (C)is not related to enabling SNMP v2c.
References:For detailed instructions on configuring SNMP on FortiSwitch, you can refer to the SNMP configuration section in the FortiSwitch administration guide available on:Fortinet Product Documentation
NEW QUESTION # 24
(Full question statement start from here)
You are deploying a FortiSwitch virtual stack in a network that contains Cisco devices. You want the Cisco devices toautomatically discover the FortiSwitch devices and exchange device information. Which two protocols must be enabled on the FortiSwitch devices to achieve this? (Choose two answers)
Answer: B,D
Explanation:
In mixed-vendor network environments, such as deployments that include bothFortiSwitchandCiscodevices, properLayer 2 discovery protocolsmust be enabled to allow devices to automatically discover neighbors and exchange essential device and interface information. FortiSwitchOS 7.6 supports bothCisco Discovery Protocol (CDP)andLink Layer Discovery Protocol (LLDP)to ensure interoperability.
Cisco Discovery Protocol (CDP)is a Cisco-proprietary Layer 2 discovery protocol widely used by Cisco switches, routers, and IP phones. When CDP is enabled on FortiSwitch interfaces, Cisco devices can discover FortiSwitch neighbors and receive information such as device ID, port ID, platform, and capabilities. This is particularly important in Cisco-centric networks where CDP is the primary discovery mechanism.
Link Layer Discovery Protocol (LLDP), defined by IEEE 802.1AB, is a vendor-neutral discovery protocol supported by both Fortinet and Cisco devices. Enabling LLDP allows FortiSwitch and Cisco devices to exchange standardized information including system name, port description, VLAN information, and management address. LLDP is essential for cross-vendor compatibility and is commonly enabled by default in modern enterprise networks.
The remaining options are incorrect.Unidirectional Link Detection (UDLD)is used to detect unidirectional fiber or copper link failures and does not provide device discovery or information exchange.LLDP-MEDis an extension of LLDP specifically designed for media endpoints such as IP phones and is not required for general switch-to-switch discovery.
Therefore, to ensure automatic discovery and information exchange between FortiSwitch and Cisco devices, both CDP and LLDP must be enabled, makingOptions B and Cthe correct and fully verified answers based on FortiSwitchOS 7.6 documentation.
NEW QUESTION # 25
......
When it comes to buying something online (for example, NSE5_FSW_AD-7.6 exam torrent), people who are concerned with privacy protection are often concerned about their personal information during the purchase process. However, we ensure that we have provided you with an appropriate procurement process and the personal information of customer who using our NSE5_FSW_AD-7.6 test prep will be securely protected. In order to ensure the security of client information, our company hired many experts to design a secure procurement process for our NSE5_FSW_AD-7.6 Test Prep. If you decide to purchase our NSE5_FSW_AD-7.6 quiz guide, you can download the app of our products with no worry. Our NSE5_FSW_AD-7.6 exam torrent is absolutely safe and virus-free.
Question NSE5_FSW_AD-7.6 Explanations: https://www.examtorrent.com/NSE5_FSW_AD-7.6-valid-vce-dumps.html
P.S. Free 2026 Fortinet NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by ExamTorrent: https://drive.google.com/open?id=1X-rcTZ7g5ZmaTMrypRdt2tAy2r3LeL9N