BONUS!!! Download part of Itcertmaster PT-AM-CPE dumps for free: https://drive.google.com/open?id=16olMDKHHYzfwNzrqnLReO4N_qzaCiw-4
Our Ping Identity PT-AM-CPE exam dumps PDF can help you prepare casually and pass exam easily. If you make the best use of your time and obtain a useful certification you may get a senior position ahead of others. Chance favors the prepared mind. Itcertmaster provide the best Ping Identity PT-AM-CPE Exam Dumps Pdf materials in this field which is helpful for you.
| Section | Objectives |
|---|---|
| Configuration, Deployment, and Troubleshooting | - PingAM configuration and environment setup - Logging, monitoring, and troubleshooting common issues |
| Authentication and Single Sign-On | - Session management and policies - SSO concepts (SAML, OAuth, OIDC) |
| PingAM Architecture and Core Concepts | - Integration with Ping Identity ecosystem - PingAM components and deployment architecture - Core authentication and authorization flows |
| Identity Federation and Integration | - Federation standards (SAML 2.0, OAuth 2.0, OpenID Connect) - External identity provider integration |
| Authorization and Access Policies | - Policy agents and policy enforcement - Access control rules and decision points |
>> PT-AM-CPE Reliable Exam Blueprint <<
our PT-AM-CPE exam guide has not equivocal content that may confuse exam candidates. All question points of our PT-AM-CPE study quiz can dispel your doubts clearly. Get our PT-AM-CPE certification actual exam and just make sure that you fully understand it and study every single question in it by heart. And we believe you will get benefited from it enormously beyond your expectations with the help our PT-AM-CPE Learning Materials.
NEW QUESTION # 97
Which statements are correct about push notification authentication implemented with PingAM?
A . The user must have a device with a camera and install the Authenticator app.
B . The registration and authentication steps must be part of the same authentication tree.
C . To register a device the user scans a barcode with the Authenticator installed on their device.1 D . During subsequent authentication processes, PingAM instructs the push server to send a notification to the registered device, and waits for the user to use the Authenticator app to approve the request.2 Options:
Answer: C
Explanation:
Push authentication in PingAM 8.0.2 utilizes the ForgeRock/Ping Authenticator app to provide a seamless, out-of-band multi-factor authentication (MFA) experience.3 To understand the correct statements, we must look at the technical requirements and the authentication lifecycle defined in the "MFA: Push Authentication" documentation.
Statement A is correct: For the initial setup, a device with a camera is required because the registration process involves scanning a QR code generated by PingAM. Additionally, the user must install the specific Authenticator app (available for iOS and Android) to handle the cryptographic exchange and receive push notifications.4 Statement D is correct: This accurately describes the runtime flow of a push journey. When a user reaches a Push Sender node, PingAM communicates with the Push Notification Service (Apple APNs or Google FCM).5 The user's device receives the notification, and PingAM enters a "waiting" state (via the Push Result Verifier node) until the user either approves or denies the request within the app.6 Why other statements are incorrect:
Statement B is incorrect because registration and authentication are typically handled by separate trees. Best practice dictates a "Device Registration" tree for the initial onboarding and a "Login/MFA" tree for day-to-day access. Forcing them into the same tree would be inefficient and create a poor user experience.
Statement C is a common point of confusion; while the user scans a code, the documentation refers to it as a QR code, not a standard barcode. In technical certification contexts, this distinction is often strictly enforced.
Therefore, only statements A and D represent the verified facts of the Push implementation in version 8.0.2, making Option C the correct answer.
NEW QUESTION # 98
To ensure the user's full name is displayed on the consent screen for an OpenID Connect application, which string should be added into the Support Claims property on the OpenID Connect tab page of the OAuth2 Provider service in PingAM?
Answer: B
Explanation:
When a client requests an OpenID Connect (OIDC) scope (like profile), PingAM 8.0.2 may present a Consent Screen to the user, asking permission to share specific claims. To make this screen user-friendly, PingAM allows administrators to map technical claim names to human-readable labels and specify localizations.
According to the PingAM documentation on "Supported Claims" in the OAuth2/OIDC Provider settings:
The format for the Supported Claims property entry is:
ClaimName|Locale|DisplayName
In this syntax:
ClaimName: The technical OIDC claim (e.g., name, email, given_name).
Locale: The ISO language code (e.g., en, fr).
DisplayName: The text that will actually appear on the UI (the "Full name" label).
Therefore, the string name|en|Full name (Option A) is the correct configuration.
Option B is incorrect because it reverses the technical name and the display name.
Option C is incorrect as it lacks the required locale component and uses full_name (which is not the standard OIDC claim name; the standard is name).
Option D attempts to perform a logic operation (+) within a configuration field where only static mapping strings are allowed. Claim composition (concatenating first and last names) is handled by the OIDC Claims Script, not by the Supported Claims UI property.
NEW QUESTION # 99
In order to support rollback in case of a failed PingAM upgrade in a two server PingDS environment, what PingDS safety measure can be configured?
Answer: C
Explanation:
Upgrading PingAM 8.0.2 in an environment with multiple PingDS (Directory Server) instances requires a careful strategy to ensure data integrity and to allow for an immediate Rollback if the upgrade fails or introduces instability.6 According to the PingAM "Plan for Rollback" and "Upgrade in a Replicated Environment" documentation, the recommended safety measure involves isolating one of the data store nodes to act as a "time-capsule" of the pre-upgrade state. The process is as follows:
Stop Replication: Before starting the upgrade, administrators should disable or stop replication between the PingDS nodes. This prevents any schema changes or data modifications performed during the AM upgrade from being propagated to the backup node.
Isolate a Node: One PingDS instance is shut down or taken out of the load balancer rotation. This instance remains in its original, healthy state.
Perform the Upgrade: The PingAM upgrade is performed against the remaining active PingDS instance. If the upgrade involves schema updates (which is common when moving to version 8.0.2), only the active node's data is modified.
Rollback Path: If the upgrade fails, the administrator can simply shut down the "corrupted" upgraded environment and restart the isolated PingDS instance along with the original PingAM WAR file. Because replication was stopped, the isolated node still contains the original configuration and user data.
Option D is the only answer that correctly identifies this "safety-net" architecture. Option A is risky because a failed upgrade would corrupt both instances. Option C is incomplete because simply "starting up" the shutdown instance after an upgrade doesn't account for how you handle the discrepancy between the upgraded and non-upgraded nodes. The goal is to keep the shutdown instance as a valid, un-touched recovery point.
NEW QUESTION # 100
Which multi-factor authentication methods require a separate device and an application?
Answer: B
Explanation:
PingAM 8.0.2 supports various Multi-Factor Authentication (MFA) methods, each with different hardware and software requirements.7 The question asks specifically for methods that require both a separate device and a specific application.
Push Authentication: This requires a mobile device (separate from the computer used to log in) and the ForgeRock/Ping Authenticator app (or a custom app using the SDK) to receive and approve the notification.8 Open Authentication (OATH): This refers to TOTP (Time-based One-Time Password). It requires a separate device (smartphone or hardware token) and an application (like ForgeRock Authenticator, Google Authenticator, or Authy) to generate the 6-digit rotating codes.
Why WebAuthn is excluded: While WebAuthn (Option A, B, and C) can use separate devices (like a YubiKey or a secondary phone), it is specifically designed to work natively with the browser and the operating system (using the FIDO2 standard). It does not require a specific "Authenticator Application" to be installed by the user; instead, it uses the platform's built-in authenticators (like TouchID, FaceID, or Windows Hello) or a hardware key handled directly by the browser's WebAuthn API.
Therefore, the two methods that strictly fit the "Separate Device + App" criteria in the PingAM ecosystem are Open Authentication and Push, making Option D the correct answer.
NEW QUESTION # 101
To protect against cross-site request forgery attacks, a default PingAM installation requires that some requests, such as POST requests, include:
Answer: A
Explanation:
Cross-Site Request Forgery (CSRF) is an attack where a malicious site sends a request to PingAM using the victim's authenticated browser session. Because standard HTML forms and cross-site requests cannot easily set custom HTTP headers, requiring a specific header is an effective defense for REST APIs.
According to the PingAM "Security" documentation and the "REST API" reference:
By default, PingAM 8.0.2 enforces a CSRF filter on its REST endpoints (such as /json/authenticate or /json/users). For any "state-changing" request (like a POST, PUT, or DELETE), the client must prove the request is intentional and not a forged browser-driven request. This is achieved by requiring at least one of the following headers:
X-Requested-With: Commonly used by AJAX libraries like jQuery. Its presence indicates the request was made via a script, which is generally not possible for a standard cross-site CSRF attack.
Accept-API-Version: This header serves two purposes. First, it ensures the client is targeting a specific version of the PingAM REST API (e.g., resource=2.0, protocol=1.0). Second, since custom headers cannot be set in simple cross-site <form> submissions, it acts as a CSRF token.
If a POST request is sent to the REST API without one of these headers, PingAM will reject the request with a 403 Forbidden error, even if the user has a valid session cookie.
Option B (If-Match: _rev) is used for concurrency control (preventing "lost updates" in IDM or AM configuration), but it is not the primary CSRF defense. Options A and D are headers sometimes used for "Zero-Page Login" or legacy authentication, but they do not provide protection against CSRF for the general REST API. Therefore, the combination of X-Requested-With or Accept-API-Version is the correct answer for default CSRF protection in PingAM 8.0.2.
NEW QUESTION # 102
......
Our PT-AM-CPE study prep has a pass rate of 98% to 100% because of the high test hit rate. So our PT-AM-CPE study materials are not only effective but also useful. As we all know, time is very important to everyone. Some candidates are very busy with their own work and families. It is very difficult to take time out to review the PT-AM-CPE Exam. But if you use PT-AM-CPE exam materials, you will learn very little time and have a high pass rate. Our PT-AM-CPE study materials are worthy of your trust.
Latest PT-AM-CPE Dumps Book: https://www.itcertmaster.com/PT-AM-CPE.html
P.S. Free & New PT-AM-CPE dumps are available on Google Drive shared by Itcertmaster: https://drive.google.com/open?id=16olMDKHHYzfwNzrqnLReO4N_qzaCiw-4