What's more, part of that EduDump EDGE-Expert dumps now are free: https://drive.google.com/open?id=1KpH1GLO9xPKcQgl7Yzdhcs23ImysKRGU
We did not gain our high appraisal by our EDGE-Expert real exam for nothing and there is no question that our EDGE-Expert practice materials will be your perfect choice. Though it is unavoidable that you may baffle by some question points during review process, our EDGE-Expert Study Guide owns clear analysis under some necessary questions. So as long as you practice our EDGE-Expert training quiz, you will perfect yourself to pass your exam successfully.
| Section | Weight | Objectives |
|---|---|---|
| Certification Process & Roles | 10% | - Steps to certification
|
| Materials & Embodied Carbon | 15% | - Low-impact material selection
|
| Water Efficiency | 20% | - Water baseline assessment
|
| EDGE Fundamentals & Framework | 20% | - Certification levels and criteria
|
| EDGE Software & Application | 10% | - Project documentation
|
| Energy Efficiency | 25% | - Energy-saving strategies
|
>> EDGE-Expert Exam Simulator Online <<
We all know that Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) exam dumps are an important section of the Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) exam that is purely based on your skills, expertise, and knowledge. So, we must find quality EDGE-Expert Questions that are drafted by industry experts who have complete knowledge regarding the Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) certification exam and can share the same with those who want to clear the EDGE-Expert exam. The best approach to finding Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) exam dumps is to check the EduDump that is offering the Excellence in Design for Greater Efficiencies (EDGE Expert) Exam (EDGE-Expert) practice questions.
NEW QUESTION # 16
Which of the following is an EDGE measure to reduce the embodied energy in materials?
Answer: D
Explanation:
Embodied energy in materials is one of the three core pillars of the EDGE standard, focusing on reducing the environmental impact of construction materials. The EDGE User Guide lists measures that specifically target embodied energy: "To reduce embodied energy in materials, EDGE includes measures such as the use of fly ash concrete, which substitutes a portion of cement with fly ash, a byproduct of coal combustion, thereby lowering the embodied energy and carbon footprint of concrete production" (EDGE User Guide, Section 7.2:
Materials Efficiency Measures). Option B, fly ash concrete, directly aligns with this measure, as it reduces the need for high-energy cement production. Option A (external shading) impacts energy by reducing cooling loads but does not directly address embodied energy: "External shading reduces operational energy use but does not contribute to embodied energy savings unless the shading materials themselves are low-impact, which is not specified in EDGE" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (occupancy sensors) is an energy efficiency measure for lighting, not materials: "Occupancy sensors reduce lighting energy use but have no direct impact on embodied energy in materials" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). Option D (low-flow shower heads) targets water efficiency, not materials:
"Low-flow shower heads reduce water consumption, but their embodied energy impact is minimal and not a focus of EDGE materials measures" (EDGE User Guide, Section 5.2: Water Efficiency Measures). The EDGE MethodologyReport further elaborates: "Fly ash concrete can reduce embodied energy by up to 20% compared to traditional concrete, making it a key measure in EDGE for materials efficiency, especially in high-volume applications like hospitals or hotels" (EDGE Methodology Report Version 2.0, Section 6.1:
Embodied Energy in Materials). Other materials measures in EDGE, such as using recycled steel or bamboo, are not listed among the options, making fly ash concrete (Option B) the correct choice for reducing embodied energy.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 3.5: Passive Design Strategies, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
NEW QUESTION # 17
A Client is developing two identical hotels in different cities but finds that the energy intensity (kWh/m²/year) of the hotels are different. Which of the following difference in these two cities could have caused this?
Answer: B
Explanation:
In the EDGE methodology, the baseline and improved-case energy calculations are highly dependent on local climate conditions because climate directly affects heating and cooling demands. Even if two hotels are identical in design, construction, and systems, their modeled energy intensity can differ if they are located in cities with different temperature profiles, humidity levels, solar radiation, and seasonal variations. In hotter or more humid climates, cooling loads and dehumidification energy increase; in colder climates, heating loads increase. EDGE uses location-specific weather data to determine these loads, which then influences the annual delivered energy consumption expressed in kWh per square meter per year.
Electricity prices do not affect energy intensity because kWh/m²/year is a consumption metric, not a cost metric. Cost of materials may influence project budgeting and material choices, but it does not directly change the operational energy calculation unless it results in different envelope performance, which the question states is identical. Availability of fresh water affects water strategy decisions and water consumption, not energy intensity. Therefore, the difference most directly responsible for differing energy intensities in EDGE for identical hotels in different cities is climate.
NEW QUESTION # 18
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?
Answer: B
Explanation:
The preliminary certification stage requires specific documentation to verify the implementation of efficiency measures like Insulation for Cold Storage Envelope. The EDGE Certification Protocol outlines the evidence requirements: "For measures involving insulation, such as Insulation for Cold Storage Envelope, the Client must provide drawings at the preliminary certification stage that specify the U-value of the installed insulation to demonstrate compliance with the measure's requirements. The U-value must be lower than the Base Case to qualify for savings" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, drawings showing the U-value specification of the cold storage envelope, directly aligns with this requirement. Option A (calculations of Coefficient of Performance) is irrelevant, as COP applies to HVAC systems, not insulation:
"COP is used for chillers, not insulation measures" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (manufacturer's data sheets for the HVAC system) is also unrelated, as the measure focuses on the envelope, not HVAC: "HVAC documentation is not required for insulation measures" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (purchase receipts showing the U-value) is more relevant at the post-construction stage: "Purchase receipts are typically required at the post-construction stage to confirm installation, while drawings suffice for design-stage verification" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Thus, drawings with U-value specifications (Option C) are required at preliminary certification.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
NEW QUESTION # 19
Which of the following measures require testing by the EDGE Auditor at the site audit?
Answer: B
Explanation:
According to the CBCI EDGE certification procedures, certain measures require physical verification and performance testing during the site audit to confirm that installed systems match the design-stage commitments entered in the EDGE software. Low-flow faucets for bathrooms fall into this category because their compliance depends on measurable flow rates. During the audit, the EDGE Auditor may use flow- measuring devices to test fixture discharge rates and verify that they meet the specified liters per minute used in the improved case calculations. This ensures that projected water savings are genuinely achieved in practice.
In contrast, measures such as a green roof are typically verified visually and through documentation such as drawings and material specifications rather than performance testing. Condensate water recovery and wastewater treatment systems are usually confirmed through installed system inspection, capacity checks, and documentation review, but not necessarily through direct flow-rate testing at each fixture point like low-flow faucets. The curriculum emphasizes that fixtures with defined performance parameters, such as flow rates, are subject to on-site testing to maintain the integrity and credibility of EDGE water savings claims.
NEW QUESTION # 20
Which of the following is NOT an option for insulation in materials efficiency measures?
Answer: D
Explanation:
Insulation materials in EDGE are evaluated for their thermal performance and embodied energy as part of materials efficiency measures. The EDGE User Guide lists common insulation options: "In EDGE, insulation materials for walls, roofs, and floors include mineral wool, polyurethane,polystyrene, and fiberglass, which are selected for their low thermal conductivity and availability in most markets" (EDGE User Guide, Section
7.2: Materials Efficiency Measures). Options A (mineral wool), B (polyurethane), and D (polystyrene) are explicitly mentioned as insulation materials in EDGE. Option C, polypropylene, is not listed as an insulation material, as confirmed by the EDGE Methodology Report: "Polypropylene is a plastic material often used in packaging or pipes, but it is not recognized in EDGE as an insulation material due to its poor thermal resistance compared to standard insulation options like polystyrene or polyurethane" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). The EDGE software's material database further excludes polypropylene from insulation options, focusing instead on materials with established thermal properties for building envelopes. Thus, polypropylene (Option C) is not an insulation option in EDGE.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
NEW QUESTION # 21
......
All three EDGE EDGE-Expert exam dumps formats are ready for download. Just select the best EDGE EDGE-Expert exam questions type and download it after paying an affordable EDGE-Expert exam questions charge and start preparation today. We offer you the most accurate EDGE-Expert Exam Answers that will be your key to pass the certification exam in your first try.
Exam EDGE-Expert Passing Score: https://www.edudump.com/exams/EDGE/EDGE-Expert/
DOWNLOAD the newest EduDump EDGE-Expert PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1KpH1GLO9xPKcQgl7Yzdhcs23ImysKRGU